Skip to content

bothlab/miniscope-baseplates

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Baseplate Components for the UCLA Miniscope v4

This repository contains design file for baseplates and related components for the UCLA Miniscope v4 which are based on and are compatible to the original designs provided by the Miniscope project but have been re-drawn.

Modifications include small adjustments to make the parts easier to manufacture, as well as using an M1.6 cone point or flat end set screw that is easier to obtain and does not have to be specially made.

In addition to the updated baseplate this repository also contains design files for a lid to protect the GRIN lens while the Miniscope is not attached.

All design files are based on the original baseplate variant 2 designs and assume your Miniscope has an objective module sleeve.

These files have been designed in collaboration with the mechanics workshop at Heidelberg University, Germany and are licensed under the CERN Open Hardware Licence Version 2 (Strongly Reciprocal).

Parts

MS4Baseplate-B_v1 is a modified Miniscope v4 baseplate design with adjusted angles and hole for a M1.6 set screw. MS4ObjectiveModuleSleeve_v1 is the module sleeve that fits with the baseplate in this repository. It should be identical to the original module sleeve except for the small indentation for the set screw. MS4BaseplateLid_v1 is a lid that can be placed on the baseplate when no Miniscope is connected to protect the implanted lens. All parts are made from aluminium.

This is a picture of the finished parts with an small allen key for the set screw:

Miniscope Baseplate/Objective Sleeve/Lid

Obtaining Screws

We are currently testing a DIN 913 A2 flat end set screw with hexagon socket and M1.6 thread in our lab.

If you are living in Germany, you can buy this exact screw from Schrauben Jäger (60900).

Internationally there are quite a few vendors available to buy this or similar types of screw from. Accu apparently has one with a cone point which may work even better (4710-SSO-M1-6-3-A2), but they also offer a flat end variant (4488-SSF-M1-6-3-A2). If you search the web for M1.6 3mm set screw A2 you can find even more vendors which offer these exact or compatible kinds of screws.

About

Adjusted baseplate designs for the UCLA Miniscope v4

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published