Manual PIA VPN Connections

This is a FreeBSD/FreeNAS fork of the original Linux scripts at https://github.com/pia-foss/manual-connections.

Fork Notes:

1. The scripts have only been tested with OpenVPN, in a FreeNAS jail. WireGuard has not been tested, but will probably work.
2. run_setup.sh is the script you call to start the whole process. It calls the following script and so on. If you're using port forwarding, port_forwarding.sh and refresh_pia_port.sh are the last scripts called. The port needs to be refreshed about every 15 minutes. I separated out the code in the latter script so it could be called by a cron job. That way the script doesn't need to be left running in a tmux session or something. Cron should look like */15 * * * * iocage exec transmission /pia/refresh_pia_port.sh and run as root.
3. I changed run_setup.sh from a question-answer format to simply a settings/config file for the process. Just edit to your desired settings. PIA username and password are handled as an external file pass.txt in the old style: first line user name, second line password. If you don't want such a file sitting on your server, you can get the question-answer code from the Linux script and change that part.
4. In port_forwarding.sh, I added a transmission command to send the port number to transmission-rpc. For this to work, transmission should be running before you start the scripts. (OpenVPN should NOT be running, as the scripts configure and start it. service openvpn stop)
5. If you have trouble, carefully read the output to see where it failed. I added a printed header to each script when it starts so you can see where you are (not openvpn_up.sh because it is run by OpenVPN). Should OpenVPN fail to start, I added a command to print /opt/piavpn-manual/debug_info to screen so you can see what was going on with OpenVPN.

End of Fork Notes

This repository contains documentation on how to create native WireGuard and OpenVPN connections to Private Internet Access' (PIA) NextGen network, and also on how to enable Port Forwarding in case you require this feature. You will find a lot of information below. However if you prefer quick test, here is the TL/DR:

git clone https://github.com/glorious1/manual-connections.git
cd manual-connections # I changed the directory name to pia.
./run_setup.sh

Dependencies

In order for the scripts to work (probably even if you do a manual setup), you will need the following packages:

• bash
• curl
• jq
• (only for WireGuard) wg-quick and wireguard kernel module
• (only for OpenVPN) openvpn
• (only for port forwarding) base64

Disclaimers

• Port Forwarding is disabled on server-side in the United States.
• These scripts do not enforce IPv6 or DNS settings, so that you have the freedom to configure your setup the way you desire it to work. This means you should have good understanding of VPN and cybersecurity in order to properly configure your setup.
• For battle-tested security, please use the official PIA App, as it was designed to protect you in all scenarios.
• This repo is really fresh at this moment, so please take into consideration the fact that you will probably be one of the first users that use the scripts.

PIA Port Forwarding

The PIA Port Forwarding service (a.k.a. PF) allows you run services on your own devices, and expose them to the internet by using the PIA VPN Network. The easiest way to set this up is by using a native PIA aplication. In case you require port forwarding on native clients, please follow this documentation in order to enable port forwarding for your VPN connection.

This service can be used only AFTER establishing a VPN connection.

Automated setup of VPN and/or PF

In order to help you use VPN services and PF on any device, we have prepared a few bash scripts that should help you through the process of setting everything up. The scripts also contain a lot of comments, just in case you require detailed information regarding how the technology works. The functionality is controlled via environment variables, so that you have an easy time automating your setup.

Here is a list of scripts you could find useful:

• Get the best region and a token: This script helps you to get the best region and also to get a token for VPN authentication. Adding your PIA credentials to env vars PIA_USER and PIA_PASS will allow the script to also get a VPN token. The script can also trigger the WireGuard script to create a connection, if you specify PIA_AUTOCONNECT=wireguard or PIA_AUTOCONNECT=openvpn_udp_standard
• Connect to WireGuard: This script allows you to connect to the VPN server via WireGuard.
• Connect to OpenVPN: This script allows you to connect to the VPN server via OpenVPN.
• Enable Port Forwarding: Enables you to add Port Forwarding to an existing VPN connection. Adding the environment variable PIA_PF=true to any of the previous scripts will also trigger this script.

Manual setup of PF

To use port forwarding on the NextGen network, first of all establish a connection with your favorite protocol. After this, you will need to find the private IP of the gateway you are connected to. In case you are WireGuard, the gateway will be part of the JSON response you get from the server, as you can see in the bash script. In case you are using OpenVPN, you can find the gateway by checking the routing table with ip route s t all.

After connecting and finding out what the gateway is, get your payload and your signature by calling getSignature via HTTPS on port 19999. You will have to add your token as a GET var to prove you actually have an active account.

Example:

bash-5.0# curl -k "https://10.4.128.1:19999/getSignature?token=$TOKEN"
{
    "status": "OK",
    "payload": "eyJ0b2tlbiI6Inh4eHh4eHh4eCIsInBvcnQiOjQ3MDQ3LCJjcmVhdGVkX2F0IjoiMjAyMC0wNC0zMFQyMjozMzo0NC4xMTQzNjk5MDZaIn0=",
    "signature": "a40Tf4OrVECzEpi5kkr1x5vR0DEimjCYJU9QwREDpLM+cdaJMBUcwFoemSuJlxjksncsrvIgRdZc0te4BUL6BA=="
}

The payload can be decoded with base64 to see your information:

$ echo eyJ0b2tlbiI6Inh4eHh4eHh4eCIsInBvcnQiOjQ3MDQ3LCJjcmVhdGVkX2F0IjoiMjAyMC0wNC0zMFQyMjozMzo0NC4xMTQzNjk5MDZaIn0= | base64 -d | jq 
{
  "token": "xxxxxxxxx",
  "port": 47047,
  "expires_at": "2020-06-30T22:33:44.114369906Z"
}

This is where you can also see the port you received. Please consider expires_at as your request will fail if the token is too old. All ports currently expire after 2 months.

Use the payload and the signature to bind the port on any server you desire. This is also done by curling the gateway of the VPN server you are connected to.

bash-5.0# curl -sGk --data-urlencode "payload=${payload}" --data-urlencode "signature=${signature}" https://10.4.128.1:19999/bindPort
{
    "status": "OK",
    "message": "port scheduled for add"
}
bash-5.0# 

Call /bindPort every 15 minutes, or the port will be deleted!

Testing your new PF

To test that it works, you can tcpdump on the port you received:

bash-5.0# tcpdump -ni any port 47047

After that, use curl on the IP of the traffic server and the port specified in the payload which in our case is 47047:

$ curl "http://178.162.208.237:47047"

and you should see the traffic in your tcpdump:

bash-5.0# tcpdump -ni any port 47047
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked v1), capture size 262144 bytes
22:44:01.510804 IP 81.180.227.170.33884 > 10.4.143.34.47047: Flags [S], seq 906854496, win 64860, options [mss 1380,sackOK,TS val 2608022390 ecr 0,nop,wscale 7], length 0
22:44:01.510895 IP 10.4.143.34.47047 > 81.180.227.170.33884: Flags [R.], seq 0, ack 906854497, win 0, length 0

License

This project is licensed under the MIT (Expat) license, which can be found here.