Firmware for Open EVSE: Open Source Hardware J1772 Electric Vehicle Supply Equipment
See http://code.google.com/p/open-evse/ for project details.

------------

Open EVSE is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.

Open EVSE is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Open EVSE; see the file COPYING.  If not, write to the
Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.

-------------

Change Log
v0.5.0
Adafruit RGB LCD and LCD backpack support
Support for Advanced Power Supply
	
v0.4.0
Command Line Interface (CLI)
Write Current setting to EEPROM
Serial Baud Rate 38400
CLI Commands: "show" "set amp" "save" "help"


v0.3.0
GFI code debugged and working.
Now compiles with Arduino 1.0

v.0.2.0	
Firmware for use with Arduino-0022. Tested as working.

* Open EVSE is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.