forked from txubelaxu/esphome-jk-bms
-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
esp32-ble-battery_number_001.yaml example created and working
- Loading branch information
Showing
2 changed files
with
526 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,245 @@ | ||
| # esphome-jk-bms | ||
|
|
||
|  | ||
|  | ||
|  | ||
|  | ||
| [](https://www.buymeacoffee.com/syssi) | ||
|
|
||
| ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE | ||
|
|
||
|  | ||
|
|
||
| ## Supported devices | ||
|
|
||
| All JK-BMS models with software version `>=6.0` are using the implemented protocol and should be supported. | ||
|
|
||
| * JK-BD4A8S4P, hw 11.xw, sw 11.24, using `JK02_32S` (reported by [@austin202220](https://github.com/syssi/esphome-jk-bms/issues/297)) | ||
| * JK-BD6A17S6P, hw 7.2, sw 7.1.0H | ||
| * JK-BD6A17S8P, hw 9.x, sw 9.01G (reported by [@jonadis](https://github.com/syssi/esphome-jk-bms/issues/35#issuecomment-1035312712)) | ||
| * JK-BD6A20S10P, hw 10.XW, sw 10.07 (reported by [@adadrag](https://github.com/syssi/esphome-jk-bms/issues/123)) | ||
| * JK-BD6A20S12P, hw 11.XW, sw 11.281, using UART-TTL (reported by [@asiridissa](https://github.com/syssi/esphome-jk-bms/discussions/339)) | ||
| * JK-BD6A24S6P, hw 6.x, sw 6.10S (reported by [@ziporah](https://github.com/syssi/esphome-jk-bms/issues/41)) | ||
| * JK-BD6A24S10P, hw 8.x, sw 8.0.6G (reported by [@spoonwzd](https://github.com/syssi/esphome-jk-bms/issues/67#issuecomment-1093844076)) | ||
| * JK-BD6A24S10P, hw 10.xw, sw 10.09 (reported by [@PMPoulsen](https://github.com/syssi/esphome-jk-bms/discussions/261#discussioncomment-5091812)) | ||
| * JK-BD4A17S4P, hw 11.xw, sw 11.01 (reported by [@Condor-XYZ](https://github.com/syssi/esphome-jk-bms/issues/221)) | ||
| * JK-BD4A17S4P, hw 11.xw, sw 11.27, using `JK02_32S` and/or UART-TTL (reported by [@hemskgren](https://github.com/syssi/esphome-jk-bms/issues/359)) | ||
| * JK-B1A8S10P, hw 11.XW, sw 11.261, using `JK02_32S` (reported by [@Chickenbreast0](https://github.com/syssi/esphome-jk-bms/issues/346)) | ||
| * JK-B1A24S15P, hw 8.x, sw 8.1.0H (reported by [@killee](https://github.com/syssi/esphome-jk-bms/discussions/4)) | ||
| * JK-B1A20S15P, hw 8.x, sw 8.14U (reported by [@trippfam07](https://github.com/syssi/esphome-jk-bms/issues/31)) | ||
| * JK-B1A20S15P, hw 10.xw, sw 10.07 (reported by [@romeox44](https://github.com/syssi/esphome-jk-bms/discussions/125)) | ||
| * JK-B1A20S15P, hw 10.xw, sw 10.10, using `JK02_24S` (reported by [@austin202220](https://github.com/syssi/esphome-jk-bms/issues/297#issuecomment-1510685683)) | ||
| * JK-B1A20S15P, hw 11.xw, sw 11.26, using UART-TTL (reported by [@Tesla72PL](https://github.com/syssi/esphome-jk-bms/issues/309)) | ||
| * JK-B2A24S15P, hw 6.x, sw 6.1.3S (reported by [@miguel300477](https://github.com/syssi/esphome-jk-bms/issues/57)) | ||
| * JK-B2A24S15P, hw 8.x, sw 8.21W (reported by [@mariusvaida](https://github.com/syssi/esphome-jk-bms/issues/120)) | ||
| * JK-B2A24S15P, hw 10.xw, sw 10.07 | ||
| * JK-B2A24S15P, hw 10.xw, sw 10.08 (reported by [@meccip](https://github.com/syssi/esphome-jk-bms/discussions/175#discussioncomment-3687287)) | ||
| * JK-B2A24S150P, hw 10.xw, sw 10.10 (reported by [@nayias](https://github.com/syssi/esphome-jk-bms/discussions/257#discussioncomment-5062807)) | ||
| * JK-B2A24S20P, hw 8.x, sw 8.1.2H (reported by [@KlausLi](https://github.com/syssi/esphome-jk-bms/issues/15#issuecomment-961447064)) | ||
| * JK-B2A24S20P, hw 8.x, sw 8.20G (reported by [@rob-oravec](https://github.com/syssi/esphome-jk-bms/discussions/46)) | ||
| * JK-B2A24S20P, hw 10.X-W, sw 10.02 (reported by [@SeByDocKy](https://github.com/syssi/esphome-jk-bms/issues/37#issuecomment-1040569576)) | ||
| * JK-B2A24S20P, hw 10.XG, sw 10.07D30 (reported by [@TheSmartGerman](https://github.com/syssi/esphome-jk-bms/discussions/122)) | ||
| * JK-B2A24S20P, hw 10.XW, sw 10.07 (reported by [@amagr0](https://github.com/syssi/esphome-jk-bms/issues/124#issuecomment-1166366196)) | ||
| * JK-B2A8S20P, hw 9.x, sw 9.01M3, using `JK02_24S` (reported by [@EasilyBoredEngineer](https://github.com/syssi/esphome-jk-bms/discussions/110)) | ||
| * JK-B2A8S20P, hw 9.x, sw 9.08W (reported by [@vrabi-cv](https://github.com/syssi/esphome-jk-bms/discussions/144#discussioncomment-3285901)) | ||
| * JK-B2A8S20P, hw 11.XW, sw 11.17, using `JK02_32S` (reported by [@senfkorn](https://github.com/syssi/esphome-jk-bms/issues/147)) | ||
| * JK-B2A8S20P, hw 11.XW, sw 11.26, using `JK02_32S` (reported by [@riker65](https://github.com/syssi/esphome-jk-bms/issues/276)) | ||
| * JK-B2A20S20P, hw 10.XW, sw 10.09 (reported by [@markusgg84](https://github.com/syssi/esphome-jk-bms/discussions/173)) | ||
| * JK-B2A20S20P, hw 10.XW, sw 11.21h, using `JK02_32S` (reported by [@Salve87](https://github.com/syssi/esphome-jk-bms/issues/308#issuecomment-1505614325)) | ||
| * JK-B2A20S20P, hw 11.XW, sw 11.24H, using `JK02_32S` (reported by [@austin202220](https://github.com/syssi/esphome-jk-bms/discussions/232)) | ||
| * JK-B2A20S20P, hw 11.XW, sw 11.25H, using `JK02_32S` (reported by [@iovcharyk](https://github.com/syssi/esphome-jk-bms/issues/249)) | ||
| * JK-B5A24S, hw 8.x, sw 8.0.3M, using `JK04` (reported by [@JSladen](https://github.com/syssi/esphome-jk-bms/issues/213)) | ||
| * JK-B2A16S, hw 3.0, sw 3.3.0, using `JK04` (reported by [@magnetus26](https://github.com/syssi/esphome-jk-bms/discussions/48)) | ||
| * GW-24S4EB (NEEY/Heltec 4A Smart Active Balancer), hw HW-2.8.0, sw ZH-1.2.3 (reported by [@cristi2005](https://github.com/syssi/esphome-jk-bms/issues/109)) | ||
| * GW-24S4EB (NEEY 4A Smart Active Balancer 4th generation), hw HW-3.2.0, sw ZH-1.2.4 (reported by [@fabhund](https://github.com/syssi/esphome-jk-bms/issues/310)) | ||
|
|
||
| ## Untested devices | ||
|
|
||
| * JK-BD6A20S6P | ||
|
|
||
| ## Requirements | ||
|
|
||
| * [ESPHome 2022.11.0 or higher](https://github.com/esphome/esphome/releases). | ||
| * Generic ESP32 or ESP8266 board | ||
|
|
||
| ## Schematics | ||
|
|
||
| <a href="https://raw.githubusercontent.com/syssi/esphome-jk-bms/main/images/circuit.jpg" target="_blank"> | ||
| <img src="https://raw.githubusercontent.com/syssi/esphome-jk-bms/main/images/circuit_thumbnail.jpg" width="50%"> | ||
| </a> | ||
|
|
||
|
|
||
| ``` | ||
| UART-TTL | ||
| ┌──────────┐ ┌─────────┐ | ||
| │ │<----- RX ----->│ │ | ||
| │ JK-BMS │<----- TX ----->│ ESP32/ │ | ||
| │ │<----- GND ---->│ ESP8266 │<-- 3.3V | ||
| │ │ │ │<-- GND | ||
| └──────────┘ └─────────┘ | ||
| # UART-TTL socket (4 Pin, JST 1.25mm pitch) | ||
| ┌─── ─────── ────┐ | ||
| │ │ | ||
| │ O O O O │ | ||
| │GND RX TX VBAT│ | ||
| └────────────────┘ | ||
| │ │ │ | ||
| │ │ └─── GPIO17 (`rx_pin`) | ||
| │ └─────── GPIO16 (`tx_pin`) | ||
| └─────────── GND | ||
| ``` | ||
|
|
||
|
|
||
| The UART-TTL (labeled as `RS485`) socket of the BMS can be attached to any UART pins of the ESP. A hardware UART should be preferred because of the high baudrate (115200 baud). The connector is called 4 Pin JST with 1.25mm pitch. | ||
|
|
||
| ## Installation | ||
|
|
||
| You can install this component with [ESPHome external components feature](https://esphome.io/components/external_components.html) like this: | ||
| ```yaml | ||
| external_components: | ||
| - source: github://syssi/esphome-jk-bms@main | ||
| ``` | ||
| or just use the `esp32-example.yaml` as proof of concept: | ||
|
|
||
| ```bash | ||
| # Install esphome | ||
| pip3 install esphome | ||
| # Clone this external component | ||
| git clone https://github.com/syssi/esphome-jk-bms.git | ||
| cd esphome-jk-bms | ||
| # Create a secrets.yaml containing some setup specific secrets | ||
| cat > secrets.yaml <<EOF | ||
| wifi_ssid: MY_WIFI_SSID | ||
| wifi_password: MY_WIFI_PASSWORD | ||
| mqtt_host: MY_MQTT_HOST | ||
| mqtt_username: MY_MQTT_USERNAME | ||
| mqtt_password: MY_MQTT_PASSWORD | ||
| EOF | ||
| # Validate the configuration, create a binary, upload it, and start logs | ||
| # If you use a esp8266 run the esp8266-examle.yaml | ||
| esphome run esp32-example.yaml | ||
| ``` | ||
|
|
||
| ## Example response all sensors enabled | ||
|
|
||
| ``` | ||
| [sensor:127]: 'jk-bms cell voltage 1': Sending state 4.12500 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 2': Sending state 4.12500 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 3': Sending state 4.12800 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 4': Sending state 4.12400 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 5': Sending state 4.12500 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 6': Sending state 4.12800 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 7': Sending state 4.12400 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 8': Sending state 4.12300 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 9': Sending state 4.12800 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 10': Sending state 4.12800 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 11': Sending state 4.12800 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 12': Sending state 4.13100 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage 13': Sending state 4.12400 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms power tube temperature': Sending state 24.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensor 1': Sending state 22.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensor 2': Sending state 22.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms total voltage': Sending state 53.64000 V with 2 decimals of accuracy | ||
| [sensor:127]: 'jk-bms current': Sending state -0.00000 A with 2 decimals of accuracy | ||
| [sensor:127]: 'jk-bms capacity remaining': Sending state 99.00000 % with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensors': Sending state 2.00000 with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging cycles': Sending state 0.00000 with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms total charging cycle capacity': Sending state 0.00000 with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms battery strings': Sending state 13.00000 with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms errors bitmask': Sending state 0.00000 with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms errors': Sending state '' | ||
| [sensor:127]: 'jk-bms operation mode bitmask': Sending state 0.00000 with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms operation mode': Sending state '' | ||
| [sensor:127]: 'jk-bms total voltage overvoltage protection': Sending state 5.46000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms total voltage undervoltage protection': Sending state 3.77000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage overvoltage protection': Sending state 4.20000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage overvoltage recovery': Sending state 4.10000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage overvoltage delay': Sending state 5.00000 s with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage undervoltage protection': Sending state 2.90000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage undervoltage recovery': Sending state 3.20000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell voltage undervoltage delay': Sending state 5.00000 s with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms cell pressure difference protection': Sending state 0.30000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms discharging overcurrent protection': Sending state 60.00000 A with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms discharging overcurrent delay': Sending state 300.00000 s with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging overcurrent protection': Sending state 25.00000 A with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging overcurrent delay': Sending state 30.00000 s with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms balance starting voltage': Sending state 3.30000 V with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms balance opening pressure difference': Sending state 0.01000 V with 3 decimals of accuracy | ||
| [switch:045]: 'jk-bms balancing': Sending state ON | ||
| [sensor:127]: 'jk-bms power tube temperature protection': Sending state 90.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms power tube temperature recovery': Sending state 70.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensor temperature protection': Sending state 100.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensor temperature recovery': Sending state 100.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms temperature sensor temperature difference protection': Sending state 20.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging high temperature protection': Sending state 70.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms discharging high temperature protection': Sending state 70.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging low temperature protection': Sending state -20.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms charging low temperature recovery': Sending state -10.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms discharging low temperature protection': Sending state -20.00000 °C with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms discharging low temperature recovery': Sending state -10.00000 °C with 0 decimals of accuracy | ||
| [switch:045]: 'jk-bms charging': Sending state OFF | ||
| [switch:045]: 'jk-bms discharging': Sending state OFF | ||
| [sensor:127]: 'jk-bms current calibration': Sending state 0.72500 A with 3 decimals of accuracy | ||
| [sensor:127]: 'jk-bms device address': Sending state 1.00000 with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms battery type': Sending state 'Ternary Lithium' | ||
| [sensor:127]: 'jk-bms sleep wait time': Sending state 10.00000 s with 0 decimals of accuracy | ||
| [sensor:127]: 'jk-bms alarm low volume': Sending state 20.00000 with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms password': Sending state '123456' | ||
| [switch:045]: 'jk-bms dedicated charger': Sending state OFF | ||
| [text_sensor:015]: 'jk-bms device type': Sending state 'Input Us' | ||
| [sensor:127]: 'jk-bms total runtime': Sending state 0.00000 h with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms software version': Sending state 'H7.X__S7.1.0H__' | ||
| [sensor:127]: 'jk-bms actual_battery_capacity': Sending state 186.00000 Ah with 0 decimals of accuracy | ||
| [text_sensor:015]: 'jk-bms manufacturer': Sending state 'BT3072020120000200521001' | ||
| [sensor:127]: 'jk-bms protocol version': Sending state 1.00000 with 0 decimals of accuracy | ||
| ``` | ||
| ## Known issues | ||
| * The battery type sensor is pretty useless because the BMS reports always the same value (`Ternary Lithium`). Regardless of which battery type was set / parameter set was loaded via the android app. ([#9][i9]) | ||
| * ESP32: Adding all supported sensors can lead to a stack overflow / boot loop. This can be solved by increasing the stack size. ([#63][i63]) | ||
| [i9]: https://github.com/syssi/esphome-jk-bms/issues/9 | ||
| [i63]: https://github.com/syssi/esphome-jk-bms/issues/63 | ||
| ## Goodies | ||
| A user of this project ([@dr3amr](https://github.com/dr3amr)) shared some [Home Assistant Lovelace UI cards for a beautiful dashboard here](https://github.com/syssi/esphome-jk-bms/discussions/230). | ||
|  | ||
| ## Debugging | ||
| If this component doesn't work out of the box for your device please update your configuration to enable the debug output of the UART component and increase the log level to the see outgoing and incoming serial traffic: | ||
| ``` | ||
| logger: | ||
| level: DEBUG | ||
|
|
||
| uart: | ||
| id: uart_0 | ||
| baud_rate: 115200 | ||
| rx_buffer_size: 384 | ||
| tx_pin: GPIO14 | ||
| rx_pin: GPIO4 | ||
| debug: | ||
| direction: BOTH | ||
| ``` | ||
| ## References | ||
| * https://secondlifestorage.com/index.php?threads/jk-b1a24s-jk-b2a24s-active-balancer.9591/ | ||
| * https://github.com/jblance/jkbms | ||
| * https://github.com/jblance/mpp-solar/issues/112 | ||
| * https://github.com/jblance/mpp-solar/blob/master/mppsolar/protocols/jk232.py | ||
| * https://github.com/jblance/mpp-solar/blob/master/mppsolar/protocols/jk485.py | ||
| * https://github.com/sshoecraft/jktool | ||
| * https://github.com/Louisvdw/dbus-serialbattery/blob/master/etc/dbus-serialbattery/jkbms.py | ||
| * https://blog.ja-ke.tech/2020/02/07/ltt-power-bms-chinese-protocol.html |
Oops, something went wrong.