ATmega328P Example

Available on Arduino Uno R3 with remove Bootloader
It will be helpful if you have some knowledge when you learn arduino
This github follow source from: https://www.nongnu.org/avr-libc/user-manual/index.html

Hardware Require

Arduino Uno R3 or ATmega328p:

USBASP(Linux) or USBISP(Windows):

Other: some electronics component such as resistor, capacitor and button

Note: You should buy USBASP from this store if you do not want to install driver: https://www.thegioiic.com/products/mach-nap-usbasp-usbisp-51-avr

Software Require

Follow this link: https://www.nongnu.org/avr-libc/user-manual/install_tools.html

Note:

- On Windows, you can use Microchip Studio: https://onlinedocs.microchip.com/pr/GUID-54E8AE06-C4C4-430C-B316-1C19714D122B-en-US-2/index.html?GUID-8F63ECC8-08B9-4CCD-85EF-88D30AC06499

- Install ProISP to upload code: http://dammedientu.vn/huong-dan-cach-nap-chuong-trinh-cho-atmega8-16-32-voi-mach-nap-usbisp-bid13-html/

How to use

Step 1: Connect your device with your pc

Step 2: Remove the bootloader if you use Arduino Uno R3

With avrdude and usbasp

avrdude -p m328p -c usbasp -e
erase 

With proisp

press ERASE button on proisp program

Step 3: Get my example

git clone https://github.com/dotai315/ATmega328P-Example.git

Step 4: First Example

On Linux

cd 'Get Started'/blink
make
make flash

On Windows

with Terminal: access the directory Get Started/blink, open terminal in here.

make
make flash

with Microchip Studio: create project and get my code to your project, then build and using proisp to upload hex file for microcontroller