consolidated s390 device configuration #2534

This is just internal to initrd, so we can already migrate the code to consolidated dasd device configuration with zdev https://github.com/ibm-s390-linux/s390-tools/tree/master/zdev/. The code change is transparent to users after dracut switch root. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

This is just internal to initrd, so we can already migrate the code to consolidated zfcp device configuration with zdev https://github.com/ibm-s390-linux/s390-tools/tree/master/zdev/. The code change is transparent to users after dracut switch root. The generated persistent config of chzdev are pure udev rules so it has no dependency on other dracut modules such as zdev, or zfcp. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Depends on https://github.com/ibm-s390-linux/s390-tools commit 9b2fb1d4d2e2 ("zdev: add helper to convert from dasd_mod.dasd to zdev config"). This is just internal to initrd, so it's possible to migrate the code to consolidated dasd device configuration with zdev https://github.com/ibm-s390-linux/s390-tools/tree/master/zdev/. The code change is transparent to users after dracut switch root. The generated persistent config of chzdev are pure udev rules so it has no dependency on other dracut modules such as zdev, dasd, or dasd_mod. Instead now install the corresponding kernel device drivers here directly. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

This is just internal to initrd, so we can already migrate the code to consolidated network device configuration with zdev https://github.com/ibm-s390-linux/s390-tools/tree/master/zdev/. The code change is transparent to users after dracut switch root. The generated persistent config of chzdev are pure udev rules so it has no dependency on the zdev dracut module. Keep the dependency on dracut module znet to at least pull in the required kernel device drivers. Since consolidated s390 network device configuration with zdev is used, it takes care of all s390-specific settings. None of the s390-specific ifcfg variables should be used anymore. NETTYPE, OPTIONS, PORTNAME, and CTCPROT can be removed entirely. SUBCHANNELS is kept because there are some dependency chains (probably around the key identifiying an interface which is not HWADDR): modules.d/35network-legacy/module-setup.sh parses (sources) each of /etc/sysconfig/network-scripts/ifcfg-* and if that contains SUBCHANNELS, create a symlink from the ifcfg file to /etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf modules.d/35network-legacy/ifup.sh installed as /sbin/ifup checks during team setup if a slave interface is an s390 channel-attached network interface and then parses (sources) /etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf from above, if that file exists Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Signed-off-by: Steffen Maier <maier@linux.ibm.com>

These are handled by s390-tools zdev dracut module 95zdev as of ibm-s390-linux/s390-tools@06a30ae ("zdev/dracut: add rd.zfcp cmdline option handling"). Even though this removes one implementation of parsing rd.zfcp in dracut, above s390-tools change introduces another implementation of parsing the exact same rd.zfcp syntax. Therefore, it would be good to keep the documentation in man/dracut.cmdline.7 of dracut as one central place describing all s390 device types that dracut handles. This also fixes problems such as RHBZ 1552619/1745470. It was due to a duplicate configuration because the SUSE-specific module 95zfcp_rules does not have any distro-specific dependency and thus also ran in Red Hat distros. That also caused a kind of competition with 95zfcp regarding the same hook registration: inst_hook cmdline 30 "$moddir/parse-zfcp.sh" "luckily" 95zfcp wins since it runs lexicographically first and the first one registering the hook via inst_simple wins. Because commit c8aa1d9 ("95zfcp_rules: simplified rd.zfcp commandline for NPIV") extended the emitted rd.zfcp syntax for hostonly-cmdline in 95zfcp_rules, kdump initrds built with hostonly-cmdline parsed such rd.zfcp with 95zfcp, which did not understand the extended syntax yet and aborted early boot with a syntax error. It also seems that parse-zfcp.sh on its own is without effect because create_udev_rule() [similar to what zfcp_disk_configure had generated] does not handle the pre-requisite of setting an FCP device (vHBA) online first. So the rport match does not trigger unless something else happens to set an FCP device online [such as rules generated by zfcp_host_configure]. Related to commit d40c49a ("fix(zfcp_rules): remove collect based udev rule creators"). module-setup.sh having copied all udev rules from the root-fs into the initrd conflicted with s390-tools dracut module zdev-kdump, which intentionally only activates the dependencies of the kdump target. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Parsing of rd.zfcp is handled by s390-tools zdev dracut module 95zdev as of ibm-s390-linux/s390-tools@06a30ae ("zdev/dracut: add rd.zfcp cmdline option handling"). Even though this removes the last implementation of parsing rd.zfcp in dracut, above s390-tools change introduces another implementation of parsing the exact same rd.zfcp syntax. Therefore, it would be good to keep the documentation in man/dracut.cmdline.7 of dracut as one central place describing all s390 device types that dracut handles. For the time being, keep copying /etc/zfcp.conf. Retain the call of zfcp_cio_free so /etc/zfcp.conf gets processed even with the typical cio_ignore kernel boot parameter ignoring most devices. Also keep handling rd.zfcp.conf=0 so users can, at boot time, ignore /etc/zfcp.conf already copied into initrd. Preparation for consolidating persistent configuration with zdev. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

These are handled by s390-tools zdev dracut module 95zdev as of ibm-s390-linux/s390-tools@9927023 ("zdev/dracut: add rd.dasd cmdline option handling"). Even though this removes one implementation of parsing rd.dasd in dracut, above s390-tools change introduces another implementation of parsing the exact same rd.dasd syntax. Therefore, it would be good to keep the documentation in man/dracut.cmdline.7 of dracut as one central place describing all s390 device types that dracut handles. module-setup.sh having copied all udev rules from the root-fs into the initrd conflicted with s390-tools dracut module zdev-kdump, which intentionally only activates the dependencies of the kdump target. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Parsing of rd.dasd is handled by s390-tools zdev dracut module 95zdev as of ibm-s390-linux/s390-tools@9927023 ("zdev/dracut: add rd.dasd cmdline option handling"). Even though this removes one implementation of parsing rd.dasd in dracut, above s390-tools change introduces another implementation of parsing the exact same rd.dasd syntax. Therefore, it would be good to keep the documentation in man/dracut.cmdline.7 of dracut as one central place describing all s390 device types that dracut handles. 95dasd/modules-setup.sh copies /etc/dasd.conf from root-fs into initrd. Retain the call of dasd_cio_free here so /etc/dasd.conf gets processed even with the typical cio_ignore kernel boot parameter ignoring most devices. Preparation for consolidating persistent configuration with zdev. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Parsing of rd.dasd is handled by s390-tools zdev dracut module 95zdev as of ibm-s390-linux/s390-tools@9927023 ("zdev/dracut: add rd.dasd cmdline option handling"). Even though this removes the last implementation of parsing rd.dasd in dracut, above s390-tools change introduces another implementation of parsing the exact same rd.dasd syntax. Therefore, it would be good to keep the documentation in man/dracut.cmdline.7 of dracut as one central place describing all s390 device types that dracut handles. For the time being, keep copying /etc/dasd.conf. The corresponding call to dasd_cio_free is in 95dasd_mod/parse-dasd-mod.sh and indirectly triggers processing of /etc/dasd.conf even with the typical cio_ignore kernel boot parameter ignoring most devices. Preparation for consolidating persistent configuration with zdev. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Remove any distribution-specifics from s390 channel-attached network device configuration. Similar to 95qeth_rules, copy the existing persistent network configuration into the initrd. This needs to go via chzdev import so chzdev updates (adds to) the cio_ignore persistent config inside the initrd, because other dracut modules such as zdev from s390-tools also import persistent (non-network) config into initrd and the set union of devices needs to end up in the cio_ignore persistent config inside the initrd. Additional debugging output can be generated with e.g. dracut option "--stdlog 5" (or short -L5). It shows the chzdev export result, the output of chzdev imports, and an overview of the resulting persistent config within the initrd. Typically combined with "--debug" to get a shell trace from building an initrd (Note: --debug does not increase the log levels). Note that nm-initrd-generator also parses rd.znet and rd.znet_ifname to fill in s390 options of a NetworkManager connection definition. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

As of the preceding commit ("feat(znet): use zdev for consolidated device configuration"), rd.znet is no longer specific to RHEL/Fedora. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Dracut module 95znet handles a superset of qeth_rules as of the preceding commit ("feat(znet): use zdev for consolidated device configuration"). The instmods list in installkernel() seemed to have been incomplete because qeth needs one or both of qeth_l2 and qeth_l3 but qeth intentionally does not depend on them so depmod cannot resolve that. In contrast to the old dracut module 95znet, 95qeth_rules also did not seem to have parsing for the upstream dracut cmdline options "rd.znet=" and "rd.znet_ifname=". Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Otherwise the last rd.znet_ifname statement overwrites the persistent network interface settings of previous such statements. Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Since consolidated s390 network device configuration with zdev is used, it takes care of all s390-specific settings. None of the s390-specific ifcfg variables should be used anymore. NETTYPE and OPTIONS can be removed entirely. SUBCHANNELS is kept because there are some dependency chains (probably around the interface identifiying key, which is not HWADDR): modules.d/35network-legacy/module-setup.sh parses (sources) each of /etc/sysconfig/network-scripts/ifcfg-* and if that contains SUBCHANNELS, creates a symlink from the ifcfg file to /etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf modules.d/35network-legacy/ifup.sh installed as /sbin/ifup checks during team setup if a slave interface is an s390 channel-attached network interface and then parses (sources) /etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf from above, if that file exists Signed-off-by: Steffen Maier <maier@linux.ibm.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

consolidated s390 device configuration #2534

consolidated s390 device configuration #2534

Commits on Mar 22, 2024

consolidated s390 device configuration #2534

Are you sure you want to change the base?

consolidated s390 device configuration #2534

Commits on Mar 22, 2024