Skip to content

Commit

Permalink
primitive arc tbd
Browse files Browse the repository at this point in the history
  • Loading branch information
@easyw
easyw committed Apr 3, 2024
1 parent fe8d04e commit 643bc96
Showing 1 changed file with 39 additions and 7 deletions.
46 changes: 39 additions & 7 deletions rf_tools_wizards/uwArcPrimitive_wizard.py
View file
Original file line number Diff line number Diff line change
Expand Up @@ -82,7 +82,7 @@ def smdCustomArcPad(self, module, size, pos, rad, name, angle_D, layer, ln, sold
#pad.SetDrillSize (0.)
#Set only the copper layer without mask
#since nothing is mounted on these pads
pad.SetPos0(pos)
#pad.SetPos0(pos)
pad.SetPosition(pos)
pad.SetPadName(name)
#pad.Rotate(pos, angle)
Expand All @@ -98,11 +98,17 @@ def smdCustomArcPad(self, module, size, pos, rad, name, angle_D, layer, ln, sold
pad.AddPrimitive(pcbnew.wxPoint(0,rad), pcbnew.wxPoint(0,0), int(angle_D*10), (size[0]))
else:
pad.AddPrimitive(pcbnew.wxPoint(0,0), pcbnew.wxPoint(rad,0), (size[0]))
else: # kv7
elif hasattr(pcbnew, 'wxPoint()'): # kv7
if not ln:
pad.AddPrimitive(pcbnew.VECTOR2I(wxPoint(0,rad)), pcbnew.VECTOR2I(wxPoint(0,0)), pcbnew.EDA_ANGLE(int(angle_D*10),pcbnew.DEGREES_T), (size[0]))
else:
pad.AddPrimitive(pcbnew.VECTOR2I(wxPoint(0,0)), pcbnew.VECTOR2I(wxPoint(rad,0)), (size[0]))
else: # kv8
if not ln:
pad.AddPrimitive(pcbnew.VECTOR2I(int(0),int(rad)), pcbnew.VECTOR2I(int(0),int(0)), pcbnew.EDA_ANGLE(int(angle_D*10),pcbnew.DEGREES_T), (size[0]))
#pad.AddPrimitive(int(0),int(rad), int(0),int(0), pcbnew.EDA_ANGLE(int(angle_D*10),pcbnew.DEGREES_T), (size[0]))
else:
pad.AddPrimitive(pcbnew.VECTOR2I(int(0),int(0)), pcbnew.VECTOR2I(int(rad),int(0)), (size[0]))
return pad

def smdPad(self,module,size,pos,name,ptype,angle_D,layer,solder_clearance,offs=None):
Expand All @@ -121,7 +127,7 @@ def smdPad(self,module,size,pos,name,ptype,angle_D,layer,solder_clearance,offs=N
pad.SetLayerSet( LSET(layer) )
#pad.SetDrillSize (0.)
#pad.SetLayerSet(pad.ConnSMDMask())
pad.SetPos0(pos)
#pad.SetPos0(pos)
pad.SetPosition(pos)
#pad.SetOrientationDegrees(90-angle_D/10)
pad.SetOrientationDegrees(angle_D)
Expand Down Expand Up @@ -153,13 +159,20 @@ def BuildThisFootprint(self):
size_pad = pcbnew.wxSize(width, width)
module.Add(self.smdCustomArcPad(module, size_pad, pcbnew.wxPoint(0,0), radius, "1", (angle_deg), F_Cu, line, sold_clear))
size_pad = pcbnew.wxSize(width, width)
else: # kv7
elif hasattr(pcbnew, 'wxPoint()'): # kv7
pos = pcbnew.VECTOR2I(wxPoint(0,0))
offset1 = pcbnew.VECTOR2I(wxPoint(-sign*width/2,0))
offset2 = pcbnew.VECTOR2I(wxPoint(0,0))
size_pad = pcbnew.VECTOR2I(VECTOR2I(width, width))
module.Add(self.smdCustomArcPad(module, size_pad, pcbnew.VECTOR2I(wxPoint(0,0)), radius, "1", (angle_deg), F_Cu, line, sold_clear))
size_pad = pcbnew.VECTOR2I(width, width)
else: # kv8
pos = pcbnew.VECTOR2I(int(0),int(0))
offset1 = pcbnew.VECTOR2I(int(-sign*width/2),int(0))
offset2 = pcbnew.VECTOR2I(int(0),int(0))
size_pad = pcbnew.VECTOR2I(VECTOR2I(int(width), int(width)))
module.Add(self.smdCustomArcPad(module, size_pad, pcbnew.VECTOR2I(int(0),int(0)), radius, "1", (angle_deg), F_Cu, line, sold_clear))
size_pad = pcbnew.VECTOR2I(int(width), int(width))
#size_pad = pcbnew.wxSize(width/5, width/5)
end_coord = (radius) * cmath.exp(math.radians(angle_deg-90)*1j)
if pads['square_end'] or angle_deg == 0 or radius == 0:
Expand All @@ -177,7 +190,7 @@ def BuildThisFootprint(self):
else:
pos = pcbnew.wxPoint(radius,0) #+width/2,0)
module.Add(self.smdPad(module, size_pad, pos, "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear))
else: # kv7
elif hasattr(pcbnew, 'wxPoint()'): # kv7
if not line:
## NB pads must be the same size and have the same center
module.Add(self.smdPad(module, size_pad, pcbnew.VECTOR2I(wxPoint(0,0)), "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear,offset1))
Expand All @@ -191,6 +204,20 @@ def BuildThisFootprint(self):
else:
pos = pcbnew.VECTOR2I(wxPoint(radius,0)) #+width/2,0)
module.Add(self.smdPad(module, size_pad, pos, "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear))
else: # kv8
if not line:
## NB pads must be the same size and have the same center
module.Add(self.smdPad(module, size_pad, pcbnew.VECTOR2I(0,0), "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear,offset1))
else:
module.Add(self.smdPad(module, size_pad, pcbnew.VECTOR2I(0,0), "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear))
if not line:
#pos = pcbnew.wxPoint(end_coord.real+(sign*width/2)*math.cos(angle),end_coord.imag+(sign*width/2)*math.sin(angle)+radius)
pos = pcbnew.VECTOR2I(int(end_coord.real),int(end_coord.imag+radius))
module.Add(self.smdPad(module, size_pad, pos, "1", PAD_SHAPE_RECT,90-angle_deg,F_Cu,sold_clear,pcbnew.VECTOR2I(int(0),int(sign*width/2))))
#*math.sin(math.pi/2-angle),(sign*width/2)*math.cos(math.pi/2-angle))))
else:
pos = pcbnew.VECTOR2I(int(radius),int(0)) #+width/2,0)
module.Add(self.smdPad(module, size_pad, pos, "1", PAD_SHAPE_RECT,0,F_Cu,sold_clear))
else:
## NB pads must be the same size and have the same center
#size_pad = pcbnew.wxSize(width/5, width/5)
Expand All @@ -200,13 +227,18 @@ def BuildThisFootprint(self):
pos = pcbnew.wxPoint(end_coord.real,end_coord.imag+radius)
else:
pos = pcbnew.wxPoint(radius,0)
else: # kv7
elif hasattr(pcbnew, 'wxPoint()'): # kv7
size_pad = pcbnew.VECTOR2I(width, width)
if not line:
pos = pcbnew.VECTOR2I(wxPoint(end_coord.real,end_coord.imag+radius))
else:
pos = pcbnew.VECTOR2I(wxPoint(radius,0))

else: # kv8
size_pad = pcbnew.VECTOR2I(int(width), int(width))
if not line:
pos = pcbnew.VECTOR2I(int(end_coord.real),int(end_coord.imag+radius))
else:
pos = pcbnew.VECTOR2I(int(radius),int(0))
module.Add(self.smdPad(module, size_pad, pos, "1", PAD_SHAPE_CIRCLE,0,F_Cu,sold_clear))

# Text size
Expand Down

0 comments on commit 643bc96

Please sign in to comment.