Nightly #185
gabrikAnnotations
6 errors and 82 warnings
|
Build for aarch64-unknown-linux-gnu on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Build for x86_64-unknown-linux-musl on ubuntu-18.04
This request was automatically failed because there were no enabled runners online to process the request for more than 1 days.
|
|
Code checks
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Code checks
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Code checks
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Code checks
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Code checks
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Doc generation
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Doc generation
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Doc generation
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Doc generation
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Doc generation
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-musl on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-unknown-linux-gnu on fedora:35
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for arm-unknown-linux-gnueabi on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for armv7-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for arm-unknown-linux-gnueabihf on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for aarch64-apple-darwin on macos-latest
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for aarch64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-apple-darwin on macos-latest
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for aarch64-apple-darwin on macos-latest:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for aarch64-apple-darwin on macos-latest
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for x86_64-apple-darwin on macos-latest
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for x86_64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-apple-darwin on macos-latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for x86_64-apple-darwin on macos-latest
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for x86_64-apple-darwin on macos-latest:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for x86_64-apple-darwin on macos-latest
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Build for x86_64-unknown-linux-musl on alpine:3
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
some crates are on edition 2021 which defaults to `resolver = "2"`, but virtual workspaces default to `resolver = "1"`
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04:
zenoh-flow/src/model/descriptor/validator.rs#L298
variable does not need to be mutable
|
|
Build for aarch64-unknown-linux-gnu on ubuntu-20.04
`zenoh-flow` (lib) generated 1 warning (run `cargo fix --lib -p zenoh-flow` to apply 1 suggestion)
|
|
Tests
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Tests
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Tests
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Tests
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Tests
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Nightly
The ubuntu-18.04 environment is deprecated, consider switching to ubuntu-20.04(ubuntu-latest), or ubuntu-22.04 instead. For more details see https://github.com/actions/virtual-environments/issues/6002
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
aarch64-apple-darwin
Expired
|
7.69 MB |
|
|
aarch64-unknown-linux-gnu
Expired
|
94.8 MB |
|
|
arm-unknown-linux-gnueabi
Expired
|
94.2 MB |
|
|
arm-unknown-linux-gnueabihf
Expired
|
95.2 MB |
|
|
armv7-unknown-linux-gnueabihf
Expired
|
94.5 MB |
|
|
x86_64-apple-darwin
Expired
|
8.25 MB |
|
|
x86_64-unknown-linux-gnu
Expired
|
96.8 MB |
|
|
x86_64-unknown-linux-musl
Expired
|
51.5 MB |
|