feat(cond): a380 temperature control and ventilation

fbw-a32nx/src/wasm/systems/a320_systems/src/air_conditioning.rs

@@ -8,7 +8,7 @@ use systems::{
         AdirsToAirCondInterface, Air, AirConditioningOverheadShared, AirConditioningPack, CabinFan,
         Channel, DuctTemperature, MixerUnit, OutflowValveSignal, OutletAir, OverheadFlowSelector,
         PackFlowControllers, PressurizationConstants, PressurizationOverheadShared, TrimAirSystem,
-        ZoneType,
+        VcmShared, ZoneType,
     },
     overhead::{
         AutoManFaultPushButton, NormalOnPushButton, OnOffFaultPushButton, OnOffPushButton,
@@ -33,7 +33,7 @@ use systems::{
 use std::time::Duration;
 use uom::si::{
     f64::*, pressure::hectopascal, ratio::percent, thermodynamic_temperature::degree_celsius,
-    velocity::knot,
+    velocity::knot, volume::cubic_meter, volume_rate::liter_per_second,
 };
 
 use crate::payload::A320Pax;
@@ -177,7 +177,7 @@ impl A320Cabin {
     fn update(
         &mut self,
         context: &UpdateContext,
-        air_conditioning_system: &(impl OutletAir + DuctTemperature),
+        air_conditioning_system: &(impl OutletAir + DuctTemperature + VcmShared),
         lgciu: [&impl LgciuWeightOnWheels; 2],
         number_of_passengers: &impl NumberOfPassengers,
         pressurization: &A320PressurizationSystem,
@@ -252,6 +252,8 @@ pub struct A320AirConditioningSystem {
 }
 
 impl A320AirConditioningSystem {
+    const CAB_FAN_DESIGN_FLOW_RATE_L_S: f64 = 325.; // litres/sec
+
     pub(crate) fn new(context: &mut InitContext, cabin_zones: &[ZoneType; 3]) -> Self {
         Self {
             acs_interface: [
@@ -299,15 +301,29 @@ impl A320AirConditioningSystem {
                 ),
             ],
             cabin_fans: [
-                CabinFan::new(1, ElectricalBusType::AlternatingCurrent(1)),
-                CabinFan::new(2, ElectricalBusType::AlternatingCurrent(2)),
+                CabinFan::new(
+                    1,
+                    VolumeRate::new::<liter_per_second>(Self::CAB_FAN_DESIGN_FLOW_RATE_L_S),
+                    ElectricalBusType::AlternatingCurrent(1),
+                ),
+                CabinFan::new(
+                    2,
+                    VolumeRate::new::<liter_per_second>(Self::CAB_FAN_DESIGN_FLOW_RATE_L_S),
+                    ElectricalBusType::AlternatingCurrent(2),
+                ),
             ],
             mixer_unit: MixerUnit::new(cabin_zones),
             packs: [
-                AirConditioningPack::new(Pack(1)),
-                AirConditioningPack::new(Pack(2)),
+                AirConditioningPack::new(context, Pack(1)),
+                AirConditioningPack::new(context, Pack(2)),
             ],
-            trim_air_system: TrimAirSystem::new(context, cabin_zones, &[1]),
+            trim_air_system: TrimAirSystem::new(
+                context,
+                cabin_zones,
+                &[1],
+                Volume::new::<cubic_meter>(4.),
+                Volume::new::<cubic_meter>(0.03),
+            ),
 
             air_conditioning_overhead: A320AirConditioningSystemOverhead::new(context, cabin_zones),
         }
@@ -481,15 +497,21 @@ impl OutletAir for A320AirConditioningSystem {
         outlet_air.set_temperature(self.duct_temperature().iter().average());
 
         outlet_air
+
+        // TODO: This should use self.trim_air_system.outlet_air()
     }
 }
 
+// This is not used in the A320
+impl VcmShared for A320AirConditioningSystem {}
+
 impl SimulationElement for A320AirConditioningSystem {
     fn accept<V: SimulationElementVisitor>(&mut self, visitor: &mut V) {
         accept_iterable!(self.acs_interface, visitor);
         accept_iterable!(self.acsc, visitor);
         self.trim_air_system.accept(visitor);
         accept_iterable!(self.cabin_fans, visitor);
+        accept_iterable!(self.packs, visitor);
 
         self.air_conditioning_overhead.accept(visitor);
 
@@ -550,7 +572,7 @@ impl AirConditioningSystemInterfaceUnit {
             self.discrete_word_1.set_bit(21, acsc.channel_1_inop());
             self.discrete_word_1.set_bit(22, acsc.channel_2_inop());
             self.discrete_word_1
-                .set_bit(23, acs_overhead.hot_air_pushbutton_is_on());
+                .set_bit(23, acs_overhead.hot_air_pushbutton_is_on(1));
             self.discrete_word_1.set_bit(24, acsc.galley_fan_fault());
             self.discrete_word_1.set_bit(25, cabin_fans[0].has_fault());
             self.discrete_word_1.set_bit(26, cabin_fans[1].has_fault());
@@ -637,7 +659,7 @@ impl<const ZONES: usize> AirConditioningOverheadShared
         self.pack_pbs.iter().map(|pack| pack.is_on()).collect()
     }
 
-    fn hot_air_pushbutton_is_on(&self) -> bool {
+    fn hot_air_pushbutton_is_on(&self, _hot_air_id: usize) -> bool {
         self.hot_air_pb.is_on()
     }
 
@@ -828,8 +850,10 @@ struct A320PressurizationConstants;
 
 impl PressurizationConstants for A320PressurizationConstants {
     // Volume data from A320 AIRCRAFT CHARACTERISTICS - AIRPORT AND MAINTENANCE PLANNING
-    const CABIN_VOLUME_CUBIC_METER: f64 = 139.; // m3
+    const CABIN_ZONE_VOLUME_CUBIC_METER: f64 = 139.; // m3
     const COCKPIT_VOLUME_CUBIC_METER: f64 = 9.; // m3
+    const FWD_CARGO_ZONE_VOLUME_CUBIC_METER: f64 = 0.; // m3 Not used in A320
+    const BULK_CARGO_ZONE_VOLUME_CUBIC_METER: f64 = 0.; // m3 Not used in A320
     const PRESSURIZED_FUSELAGE_VOLUME_CUBIC_METER: f64 = 330.; // m3
     const CABIN_LEAKAGE_AREA: f64 = 0.0003; // m2
     const OUTFLOW_VALVE_SIZE: f64 = 0.05; // m2

fbw-a380x/docs/a380-simvars.md

@@ -92,19 +92,72 @@
         - UPPER_DECK_5
         - UPPER_DECK_6
         - UPPER_DECK_7
+        - CARGO_FWD
+        - CARGO_BULK
 
 - A32NX_COND_{id}_DUCT_TEMP
     - Degree Celsius
     - Temperature of trim air coming out of the ducts in the cabin and cockpit
     - {id}
         - Same as A32NX_COND_{id}_TEMP
 
+- A32NX_COND_PACK_{id}_IS_OPERATING
+    - Bool
+    - True when the pack operates normally (at least one FCV is open)
+    - {id} 1 or 2
+
+- A32NX_COND_PACK_{id}_OUTLET_TEMPERATURE
+    - Degree Celsius
+    - Outlet temperature of the packs
+    - {id} 1 or 2
+
 - A32NX_COND_{id}_TRIM_AIR_VALVE_POSITION
     - Percentage
     - Percentage opening of each trim air valve (hot air)
     - {id}
         - Same as A32NX_COND_{id}_TEMP
 
+- A32NX_COND_HOT_AIR_VALVE_{id}_IS_ENABLED
+    - Bool
+    - True if the hot air valve {1 or 2} is enabled
+
+- A32NX_COND_HOT_AIR_VALVE_{id}_IS_OPEN
+    - Bool
+    - True if the hot air valve {1 or 2} is open
+
+- A32NX_COND_TADD_CHANNEL_FAILURE
+    - Number
+        - 0 if no failure
+        - 1 or 2 if single channel failure (for failed channel id)
+        - 3 if dual channel failure
+
+- A32NX_VENT_PRIMARY_FANS_ENABLED
+    - Bool
+    - True if the primary (high pressure) fans are enabled and operating normally
+
+- A32NX_VENT_{id}_EXTRACTION_FAN_ON
+    - Bool
+    - True when the the extraction fans of the fwd/bulk cargo compartment operate normally
+    - {id}
+        - FWD
+        - BULK
+
+- A32NX_VENT_{id}_ISOLATION_VALVE_OPEN
+    - Bool
+    - True when the isolation valves of the fwd/bulk cargo compartment are open
+    - {id}
+        - FWD
+        - BULK
+
+- A32NX_VENT_{id}_VCM_CHANNEL_FAILURE
+    - Number
+        - 0 if no failure
+        - 1 or 2 if single channel failure (for failed channel id)
+        - 3 if dual channel failure
+    - {id}
+        - FWD
+        - AFT
+
 - A32NX_OVHD_COND_{id}_SELECTOR_KNOB
     - Number (0 to 300)
     - Rotation amount of the overhead temperature selectors for the cockpit and the cabin