feat(cond): air conditioning failures

.github/CHANGELOG.md

@@ -41,6 +41,7 @@
 1. [EFB/FWC] Auto Call Outs selectable - @tracernz (Mike)
 1. [FWC] Added "twenty five hundred" and "two thousand" callouts - @tracernz (Mike)
 1. [FMS] Load procedures that reference a runway correctly - @tracernz (Mike)
+1. [COND] Add Air Conditioning systems failures - @mjuhe (Miquel Juhe)
 
 ## 0.10.0
 

fbw-a32nx/docs/a320-simvars.md

@@ -2628,6 +2628,59 @@ In the variables below, {number} should be replaced with one item in the set: {
 
 ## Air Conditioning / Pressurisation / Ventilation
 
+- A32NX_COND_ACSC_{number}_DISCRETE_WORD_1
+    - Number 1 or 2
+    - Discrete Data word 1 of the ACSC bus output (label 060)
+    - Arinc429<Discrete>
+    - | Bit |                      Description                     |
+      |:---:|:----------------------------------------------------:|
+      | 11  | Duct overheat F/D warning                            |
+      | 12  | Duct overheat FWD warning                            |
+      | 13  | Duct overheat AFT warning                            |
+      | 14  | Not used                                             |
+      | 15  | Not used                                             |
+      | 16  | Not used                                             |
+      | 17  | Spare                                                |
+      | 18  | Trim air pressure high                               |
+      | 19  | ACSC Lane 1 Active                                   |
+      | 20  | TAPRV status - close                                 |
+      | 21  | ACSC Lane 1 INOP                                     |
+      | 22  | ACSC Lane 2 INOP                                     |
+      | 23  | Hot air switch position on                           |
+      | 24  | G + T fan off/fault                                  |
+      | 25  | Recirc fan LH fault/OVHT                             |
+      | 26  | Recirc fan RH fault/OVHT                             |
+      | 27  | TAPRV disagree                                       |
+      | 28  | Trim air system fault                                |
+      | 29  | ACSC Installed                                       |
+
+- A32NX_COND_ACSC_{number}_DISCRETE_WORD_2
+    - Number 1 or 2
+    - Discrete Data word 2 of the ACSC bus output (label 061)
+    - Bits with * not yet implemented
+    - Arinc429<Discrete>
+    - | Bit |                      Description                     |
+      |:---:|:----------------------------------------------------:|
+      | 11  | Spare                                                |
+      | 12  | *K1 half wing anti-ice on                            |
+      | 13  | *K2 full wing anti-ice on                            |
+      | 14  | *K3 nacelle anti-ice on                              |
+      | 15  | *K4 air cond with two packs on                       |
+      | 16  | *K5 air cond with one pack on                        |
+      | 17  | *K6 air cond with two packs and one engine on        |
+      | 18  | Trim valve F/D inop                                  |
+      | 19  | Trim valve FWD inop                                  |
+      | 20  | Trim valve AFT inop                                  |
+      | 21  | Not used                                             |
+      | 22  | Not used                                             |
+      | 23  | *FCV status (Both pakcs off)                         |
+      | 24  | *One pack operation                                  |
+      | 25  | *FCV status (Both pakcs on)                          |
+      | 26  | Spare                                                |
+      | 27  | *Nacelle anti-ice eng 2 open                         |
+      | 28  | *Nacelle anti-ice eng 1 open                         |
+      | 29  | Spare                                                |
+
 - A32NX_COND_{id}_TEMP
     - Degree Celsius
     - Temperature as measured in each of the cabin zones and cockpit
@@ -2660,14 +2713,6 @@ In the variables below, {number} should be replaced with one item in the set: {
         - FWD
         - AFT
 
-- A32NX_HOT_AIR_VALVE_IS_ENABLED
-    - Bool
-    - True if the trim air system is enabled (pushbutton in auto and power supplied to system)
-
-- A32NX_HOT_AIR_VALVE_IS_OPEN
-    - Bool
-    - True if the trim air system is enabled and the hot air valve is open
-
 - A32NX_OVHD_COND_{id}_SELECTOR_KNOB
     - Percentage
     - Percent rotation of the overhead temperature selectors for each of the cabin zones
@@ -2759,13 +2804,6 @@ In the variables below, {number} should be replaced with one item in the set: {
     - Bool
     - True if CAB FANS pushbutton is in the on position (no white light)
 
-- A32NX_PACKS_{number}_IS_SUPPLYING
-    - Bool
-    - True if the corresponding pack is on and supplying air to the cabin
-    - {number}
-        - 1
-        - 2
-
 ## Pneumatic
 
 - A32NX_PNEU_ENG_{number}_IP_PRESSURE:

fbw-a32nx/src/systems/failures/src/a320.ts

@@ -1,6 +1,22 @@
 // One can rightfully argue that this constant shouldn't be located in @flybywiresim/failures.
 // Once we create an A320 specific package, such as @flybywiresim/a320, we can move it there.
 export const A320Failure = Object.freeze({
+    Acsc1Lane1: 21000,
+    Acsc1Lane2: 21001,
+    Acsc2Lane1: 21002,
+    Acsc2Lane2: 21003,
+    HotAir: 21004,
+    TrimAirHighPressure: 21005,
+    CkptTrimAirFailure: 21006,
+    FwdTrimAirFailure: 21007,
+    AftTrimAirFailure: 21008,
+    CkptDuctOvht: 21009,
+    FwdDuctOvht: 21010,
+    AftDuctOvht: 21011,
+    CabinFan1Failure: 21012,
+    CabinFan2Failure: 21013,
+    LabGalleyFan: 21014,
+
     Fac1Failure: 22000,
     Fac2Failure: 22001,
 

fbw-a32nx/src/systems/instruments/src/Common/EWDMessages.tsx

@@ -122,8 +122,49 @@ const EWDMessages = {
     '213122114': '\x1b<5m MAX FL.....100/MEA-MORA',
     '213122115': '\x1b<7m  .IF CAB ALT>14000FT:',
     '213122116': '\x1b<5m -PAX OXY MASKS...MAN ON',
+    '216120601': '\x1b<4m\x1b4mAIR\x1bm PACK 1+2 FAULT',
+    '216120602': '\x1b<5m -PACK 1.............OFF',
+    '216120603': '\x1b<5m -PACK 2.............OFF',
+    '216120604': '\x1b<5m -DES TO FL 100/MEA-MORA',
+    '216120605': '\x1b<7m  .WHEN DIFF PR <1 PSI',
+    '216120606': '\x1b<7m   AND FL BELOW 100:',
+    '216120607': '\x1b<5m -RAM AIR.............ON',
+    '216120608': '\x1b<5m MAX FL.....100/MEA-MORA',
+    '216120201': '\x1b<4m\x1b4mAIR\x1bm PACK 1 FAULT',
+    '216120202': '\x1b<5m -PACK 1.............OFF',
+    '216120301': '\x1b<4m\x1b4mAIR\x1bm PACK 2 FAULT',
+    '216120302': '\x1b<5m -PACK 2.............OFF',
     '216120701': '\x1b<4m\x1b4mAIR\x1bm PACK 1 OFF',
     '216120801': '\x1b<4m\x1b4mAIR\x1bm PACK 2 OFF',
+    '216129101': '\x1b<4m\x1b4mAIR\x1bm COND CTL 1-A FAULT',
+    '216129401': '\x1b<4m\x1b4mAIR\x1bm COND CTL 2-A FAULT',
+    '216129701': '\x1b<4m\x1b4mAIR\x1bm COND CTL 1-B FAULT',
+    '216129801': '\x1b<4m\x1b4mAIR\x1bm COND CTL 2-B FAULT',
+    '216321001': '\x1b<4m\x1b4mCOND\x1bm CKPT DUCT OVHT',
+    '216321002': '\x1b<7m  .WHEN DUCT TEMP<70 DEG C:',
+    '216321003': '\x1b<7m  .WHEN DUCT TEMP<158 DEG F:',
+    '216321004': '\x1b<5m -HOT AIR....OFF THEN ON',
+    '216321101': '\x1b<4m\x1b4mCOND\x1bm FWD CAB DUCT OVHT',
+    '216321102': '\x1b<7m  .WHEN DUCT TEMP<70 DEG C:',
+    '216321103': '\x1b<7m  .WHEN DUCT TEMP<158 DEG F:',
+    '216321104': '\x1b<5m -HOT AIR....OFF THEN ON',
+    '216321201': '\x1b<4m\x1b4mCOND\x1bm AFT CAB DUCT OVHT',
+    '216321202': '\x1b<7m  .WHEN DUCT TEMP<70 DEG C:',
+    '216321203': '\x1b<7m  .WHEN DUCT TEMP<158 DEG F:',
+    '216321204': '\x1b<5m -HOT AIR....OFF THEN ON',
+    '216321801': '\x1b<4m\x1b4mCOND\x1bm L+R CAB FAN FAULT',
+    '216321802': '\x1b<5m -PACK FLOW...........HI',
+    '216326001': '\x1b<4m\x1b4mCOND\x1bm LAV+GALLEY FAN FAULT',
+    '216329001': '\x1b<4m\x1b4mCOND\x1bm HOT AIR FAULT',
+    '216329002': '\x1b<5m -HOT AIR............OFF',
+    '216329003': '\x1b<7m  .IF HOT AIR STILL OPEN:',
+    '216329004': '\x1b<5m -PACK 1.............OFF',
+    '216329005': '\x1b<5m -PACK 2.............OFF',
+    '216330501': '\x1b<4m\x1b4mCOND\x1bm TRIM AIR SYS FAULT',
+    '216330502': '\x1b<4m -CPKT TRIM VALVE',
+    '216330503': '\x1b<4m -FWD CAB TRIM VALVE',
+    '216330504': '\x1b<4m -AFT CAB TRIM VALVE',
+    '216330505': '\x1b<4m -TRIM AIR HI PR',
     '221070001': '\x1b<4m\x1b4mT.O\x1bm SPEEDS TOO LOW',
     '221070002': '\x1b<5m -TOW AND T.O DATA.CHECK',
     '221071001': '\x1b<4m\x1b4mT.O\x1bm V1/VR/V2 DISAGREE',

fbw-a32nx/src/systems/instruments/src/EFB/failures-orchestrator-provider.tsx

@@ -15,6 +15,22 @@ interface FailuresOrchestratorContext {
 }
 
 const createOrchestrator = () => new FailuresOrchestrator('A32NX', [
+    [21, A320Failure.Acsc1Lane1, 'ACSC 1 Lane 1'],
+    [21, A320Failure.Acsc1Lane2, 'ACSC 1 Lane 2'],
+    [21, A320Failure.Acsc2Lane1, 'ACSC 2 Lane 1'],
+    [21, A320Failure.Acsc2Lane2, 'ACSC 2 Lane 2'],
+    [21, A320Failure.HotAir, 'Trim Air Pressure Regulating Valve'],
+    [21, A320Failure.TrimAirHighPressure, 'Trim Air System High Pressure'],
+    [21, A320Failure.CkptTrimAirFailure, 'Cockpit Trim Air Valve'],
+    [21, A320Failure.FwdTrimAirFailure, 'Forward Zone Trim Air Valve'],
+    [21, A320Failure.AftTrimAirFailure, 'Aft Zone Trim Air Valve'],
+    [21, A320Failure.CkptDuctOvht, 'Cockpit Duct Overheat'],
+    [21, A320Failure.FwdDuctOvht, 'Forward Zone Duct Overheat'],
+    [21, A320Failure.AftDuctOvht, 'Aft Zone Duct Overheat'],
+    [21, A320Failure.CabinFan1Failure, 'Cabin Fan 1'],
+    [21, A320Failure.CabinFan2Failure, 'Cabin Fan 2'],
+    [21, A320Failure.LabGalleyFan, 'Extraction Fan of lavatory and galley'],
+
     [22, A320Failure.Fac1Failure, 'FAC 1'],
     [22, A320Failure.Fac2Failure, 'FAC 2'],