multipath-tools for Linux

https://github.com/opensvc/multipath-tools

This package provides the following binaries to drive the Device Mapper multipathing driver:

• multipath - Device mapper target autoconfig.
• multipathc - Interactive client for multipathd.
• multipathd - Multipath daemon.
• mpathpersist - Manages SCSI persistent reservations on dm multipath devices.
• kpartx - Create device maps from partition tables.

Releases

To get a specific X.Y.Z release, use one of the following method:

Git

git clone https://github.com/opensvc/multipath-tools.git
cd multipath-tools
git tag
git archive --format=tar.gz --prefix=multipath-tools-X.Y.Z/ X.Y.Z > ../multipath-tools-X.Y.Z.tar.gz

Direct download

wget "https://github.com/opensvc/multipath-tools/archive/X.Y.Z.tar.gz" -O multipath-tools-X.Y.Z.tar.gz

Browser

Go to: https://github.com/opensvc/multipath-tools/tags Select a release-tag and then click on "zip" or "tar.gz".

Building multipath-tools

Prerequisites: development packages of for libdevmapper, libaio, libudev, libjson-c, liburcu, and libsystemd. If commandline editing is enabled (see below), the development package for either libedit or libreadline is required as well.

Then, build and install multipath-tools with:

make
make DESTDIR="/my/target/dir" install

To uninstall, type:

make uninstall

By default, the build will run quietly, just printing one-line messages about the files being built. To enable more verbose output, run make V=1.

Customizing the build

Note: With very few exceptions, the build process does not read configuration from the environment. So using syntax like

SOME_VAR=some_value make

will not have the intended effect. Use the following instead:

make SOME_VAR=some_value

See "Passing standard compiler flags" below for an exception. The following variables can be passed to the make command line:

• V=1: enable verbose build.

• plugindir="/some/path": directory where libmultipath plugins (path checkers, prioritizers, and foreign multipath support) will be looked up. This used to be the run-time option multipath_dir in earlier versions. The default is $(prefix)/$(LIB)/multipath, where $(LIB) is lib64 on systems that have /lib64, and lib otherwise.

• configfile="/some/path": The path to the main configuration file. The default is $(etc_prefix)/etc/multipath.conf.

• configdir="/some/path" : directory to search for additional configuration files. This used to be the run-time option config_dir in earlier versions. The default is $(etc_prefix)/etc/multipath/conf.d.

• statedir="/some/path": The path of the directory where multipath-tools stores run-time settings that need persist between reboots, such as known WWIDs, user-friendly names, and persistent reservation keys. The default is $(etc_prefix)/etc/multipath.

• READLINE=libedit or READLINE=libreadline: enable command line history and TAB completion in the interactive mode (which is entered with multipathd -k or multipathc). The respective development package will be required for building. By default, command line editing is disabled. Note that using libreadline may make binary indistributable due to license incompatibility.

• ENABLE_LIBDMMP=0: disable building libdmmp

• ENABLE_DMEVENTS_POLL=0: disable support for the device-mapper event polling API. For use with pre-5.0 kernels that don't support dmevent polling (but even if you don't use this option, multipath-tools will work with these kernels).

• SYSTEMD: The version number of systemd (e.g. "244") to compile the code for. The default is autodetected, assuming that the systemd version in the build environment is the same as on the target system. Override the value to build for a different systemd version, or set it to "" to build for a system without systemd. Caution: multipathd without systemd has been largely untested by the upstream maintainers since at least 2020.

• SCSI_DH_MODULES_PRELOAD="(list)": specify a space-separated list of SCSI device handler kernel modules to load early during boot. Some multipath-tools functionality depends on these modules being loaded early. This option causes a modules-load.d(5) configuration file to be created, thus it depends on functionality provided by systemd. This variable only matters for make install.

  Note: The usefulness of the preload list depends on the kernel configuration. It's especially useful if scsi_mod is builtin but scsi_dh_alua and other device handler modules are built as modules. If scsi_mod itself is compiled as a module, it might make more sense to use a module softdep for the same purpose by creating a modprobe.d file like this:

   softdep scsi_mod post: scsi_dh_alua scsi_dh_rdac
  

Installation Paths

• prefix: The directory prefix for (almost) all files to be installed. "Usr-merged" distributions¹ may want to set this to /usr. The default is empty ("").
• usr_prefix: where to install those parts of the code that aren't necessary for booting. The default is /usr if $(prefix) is empty, and $(prefix) otherwise.
• systemd_prefix: Prefix for systemd-related files¹. The default is /usr.
• etc_prefix: The prefix for configuration files. "usr-merged" distributions with immutable /usr¹ may want to set this to "". The default is $(prefix).
• LIB: the subdirectory under prefix where shared libraries will be installed. By default, the makefile uses /lib64 if this directory is found on the build system, and /lib otherwise.

The options configdir, plugindir, configfile, and statedir above can be used for setting individual paths where the prefix variables don't provide sufficient control. See Makefile.inc for even more fine-grained control.

prefix, DESTDIR and TGTDIR

prefix and related variables are included in compiled-in paths like plugindir and are used by make install. Using prefix is useful if multipath-tools is built locally on the same host where it's supposed to be installed.

By convention, the DESTDIR variable is prepended to all paths by make install, but not to any compiled-in paths. It is useful if the software is built on one system (build host) but intended to be run on another system (installation host). This is typically used in build systems like rpmbuild to set a root directory for all the installed files.

On the contrary, the TGTDIR variable is used for compiled-in paths only, and ignored by make install. It is useful for running multipath-tools in a separate subdirectory in the installation host, mostly for testing / development purposes.

For example,

make prefix=/opt DESTDIR=/build TGTDIR=/test install

will install plugins into /build/opt/lib64/multipath on the build host. On the installation host, the plugins will be expected to be found under /test/opt/lib64/multipath. If the developer runs

rsync -a $BUILD_HOST:$DESTDIR/ $INSTALL_HOST:$TGTDIR/

and adds $TGTDIR/lib64 to LD_LIBRARY_PATH on the installation host, the multipath binaries installed under $TGTDIR will find their plugins and configuration files in the expected compiled-in paths.

Compiler Options

Use OPTFLAGS to change optimization-related compiler options; e.g. OPTFLAGS="-g -O0" to disable all optimizations.

Passing standard compiler flags

Contrary to most other variables, the standard variables CFLAGS, CPPFLAGS, and LDFLAGS must be passed to make via the environment if they need to be customized:

CPPFLAGS="-D_SECRET_=secret" make

Special Makefile targets

The following targets are intended for developers only.

• make test to build and run the unit tests
• make valgrind-test to run the unit tests under valgrind
• make abi to create an XML representation of the ABI of the libraries in the abi/ subdirectory
• make abi-test to compare the ABI of a different multipath-tools version, which must be stored in the reference-abi/ subdirectory. If this test fails, the ABI has changed wrt the reference.
• make compile-commands.json to create input for clangd.

Contributing

Please send patches or contributions for general discussion about multipath tools to the mailing list (see below). You can also create issues or pull requests on GitHub. You will be asked to send your patches to the mailing list unless your patch is trivial.

Mailing list

The mailing list for multipath-tools is dm-devel@lists.linux.dev. To subscribe, send an email to dm-devel+subscribe@lists.linux.dev. Mailing list archives are available on lore.kernel.org and marc.info. See also the lists.linux.dev home page.

When sending patches to the mailing list, please add a Signed-off-by: tag, and add Benjamin Marzinski bmarzins@redhat.com and Martin Wilck mwilck@suse.com to the Cc list.

Staging area

Between releases, the latest reviewed code can be obtained from the queue branch in the openSUSE/multipath-tools repository on GitHub. From there, pull requests for new releases in the master repository are created roughly every 3 months.

Adding new storage devices

If you want to add special settings for a storage device which is new on the market, follow the instructions at the top of the file libmultipath/hwtable.c.

Changelog

• pre-0.4.5: https://web.archive.org/web/20070309224034/http://christophe.varoqui.free.fr/wiki/wakka.php?wiki=ChangeLog
• post-0.4.5: https://github.com/opensvc/multipath-tools/commits/master

Maintainer

Christophe Varoqui christophe.varoqui@opensvc.com Device-mapper development mailing list dm-devel@lists.linux.dev

Licence

The multipath-tools source code is covered by several different licences. Refer to the individual source files for details. Source files which do not specify a licence are shipped under LGPL-2.0 (see LICENSES/LGPL-2.0).

ALUA

This is a rough guide, consult your storage device manufacturer documentation.

ALUA is supported in some devices, but usually it's disabled by default. To enable ALUA, the following options should be changed:

• EMC CLARiiON/VNX: "Failover Mode" should be changed to "4" or "Active-Active mode(ALUA)-failover mode 4"

• HPE 3PAR, Primera, and Alletra 9000: "Host:" should be changed to "Generic-ALUA Persona 2 (UARepLun, SESLun, ALUA)".

• Promise VTrak/Vess: "LUN Affinity" and "ALUA" should be changed to "Enable", "Redundancy Type" must be "Active-Active".

• LSI/Engenio/NetApp RDAC class, as NetApp SANtricity E/EF Series and rebranded arrays: "Select operating system:" should be changed to "Linux DM-MP (Kernel 3.10 or later)".

• NetApp ONTAP FAS/AFF Series: To check ALUA state: "igroup show -v <igroup_name>", and to enable ALUA: "igroup set <igroup_name> alua yes".

• Huawei OceanStor: "Host Access Mode" should be changed to "Asymmetric".

NVMe

Using dm-multipath with NVMe

NVMe multipath is natively supported by the Linux kernel. If for some reason you prefer using device mapper multipath with NVMe devices, you need to disable native multipathing first:

echo "options nvme_core multipath=N" > /etc/modprobe.d/01-nvme_core-mp.conf

Afterwards, regenerate the initramfs (dracut -f or update-initramfs) and reboot.

Using multipath-tools with native NVMe multipath

If native NVMe multipathing is enabled, you can still use multipath-tools for displaying the topology and some other information about native NVMe multipath setups. This feature is disabled by default. To enable it, set enable_foreign nvme in the defaults section of multipath.conf. Commands like multipath -ll will then display information about NVMe native multipath. This support is read-only; modifying the native multipath configuration is not supported.

Footnotes

1. systemd installations up to v254 which have been built with split-usr=true may use separate prefixdir and rootprefixdir directories, where prefixdir is a subdirectory of rootprefixdir. multipath-tools' systemd_prefix corresponds to systemd's prefixdir. On such distributions, override unitdir and libudevdir to use systemd's rootprefix: make libudevdir=/lib/udev unitdir=/lib/systemd/system ↩ ↩² ↩³