Work ci automation (#7)

* Updates

* Added new testbed folders

Signed-off-by: Hubert Gee <hubogee@users.noreply.github.com>

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/DHCP

@@ -0,0 +1,6 @@
+#
+# ISC dhcpd configuration
+#
+
+
+option domain-name "dentlab-agg1";

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/HOSTNAME

@@ -0,0 +1 @@
+dentlab-agg1

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/HOSTS

@@ -0,0 +1,5 @@
+127.0.0.1       localhost
+::1             localhost ip6-localhost ip6-loopback
+ff02::1         ip6-allnodes
+ff02::2         ip6-allrouters
+127.0.1.1       dentlab-agg1

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/NETWORK_INTERFACES

@@ -0,0 +1,16 @@
+#
+# ONL format of dent interfaces
+#
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*.intf
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+    address 20.20.0.1/32
+
+# The management interface
+auto ma1
+iface ma1 inet dhcp

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/NTP

@@ -0,0 +1,59 @@
+# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
+
+
+driftfile /var/lib/ntp/ntp.drift
+
+
+# Enable this if you want statistics to be logged.
+#statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+
+# You do need to talk to an NTP server or two (or three).
+#server ntp.your-provider.example
+
+
+# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
+# pick a different set every time it starts up.  Please consider joining the
+# pool: <http://www.pool.ntp.org/join.html>
+#
+
+# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery
+restrict -6 default kod notrap nomodify nopeer noquery
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Clients from this (example!) subnet have unlimited access, but only if
+# cryptographically authenticated.
+#restrict 192.168.123.0 mask 255.255.255.0 notrust
+
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+#broadcast 192.168.123.255
+
+# If you want to listen to time broadcasts on your local subnet, de-comment the
+# next lines.  Please do this only if you trust everybody on the network!
+#disable auth
+#broadcastclient
+
+# Specify interfaces, don't listen on switch ports
+#interface listen ma1
+interface listen lo
+interface listen lo:0
+interface listen dummy0

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/QUAGGA_CONFIG

@@ -0,0 +1,11 @@
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+log timestamp precision 6
+!
+no zebra nexthop kernel enable
+!
+line vty
+!
+end

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/QUAGGA_DAEMONS

@@ -0,0 +1,30 @@
+# This file tells the quagga package which daemons to start.
+#
+# Entries are in the format: <daemon>=(yes|no|priority)
+#   0, "no"  = disabled
+#   1, "yes" = highest priority
+#   2 .. 10  = lower priorities
+# Read /usr/share/doc/quagga/README.Debian for details.
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/quagga/examples/.
+#
+# ATTENTION:
+#
+# When activation a daemon at the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "quagga", else
+# the daemon will not be started by /etc/init.d/quagga. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
+#
+# The watchquagga daemon is always started. Per default in monitoring-only but
+# that can be changed via /etc/quagga/debian.conf.
+#
+zebra=yes
+bgpd=yes
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/QUAGGA_VTYSH

@@ -0,0 +1,3 @@
+username cumulus nopassword
+!
+service integrated-vtysh-config

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/RESOLV

@@ -0,0 +1 @@
+nameserver 8.8.8.8

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/agg1/SSHD_CONF

@@ -0,0 +1,88 @@
+# Package generated configuration file
+# See the sshd_config(5) manpage for details
+
+# What ports, IPs and protocols we listen for
+Port 22
+# Use these options to restrict which interfaces/protocols sshd will bind to
+#ListenAddress ::
+ListenAddress 0.0.0.0
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_ecdsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 1024
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 120
+PermitRootLogin yes
+StrictModes yes
+
+RSAAuthentication yes
+PubkeyAuthentication yes
+#AuthorizedKeysFile     %h/.ssh/authorized_keys
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+RhostsRSAAuthentication no
+# similar for protocol version 2
+HostbasedAuthentication no
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Change to no to disable tunnelled clear text passwords
+PasswordAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosGetAFSToken no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+X11Forwarding yes
+X11DisplayOffset 10
+PrintMotd no
+PrintLastLog yes
+TCPKeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+Subsystem sftp /usr/lib/openssh/sftp-server
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg1/testbed.json

@@ -0,0 +1,60 @@
+{
+    "devices": [
+        {
+            "friendlyName":"Dent agg1",
+            "os":"dentos",
+            "type" : "INFRA_SWITCH",
+            "hostName": "agg1",
+            "model": "arm64-accton-as5114-48x-r0",
+            "ip": "10.36.118.44",
+            "login":{
+                "userName":"root",
+                "password":"onl"
+            },
+            "cpuArchitecture": "arm",
+            "macAddress": "34:EF:B6:EC:38:02",
+            "serialConsole": {
+		"ip": "10.36.118.200",
+		"port": 7005
+	    },
+	    "pdu": {
+		"ip": "10.36.118.201",
+		"login": "dent",
+		"password": "dent123!",
+		"number": 5
+	    },
+            "serialDev":"/dev/ttyUSB0",
+            "baudrate": 115200,
+            "mediaMode":"fiber",
+            "links" : [
+                ["swp5", "agg1:swp6"],
+                ["swp7", "agg1:swp8"],
+                ["swp9", "agg1:swp10"]
+            ]
+        },
+        {
+            "friendlyName":"Ixia Traffic Generator",
+            "os":"ixnetwork",
+            "type" : "TRAFFIC_GENERATOR",
+            "hostName": "ixia",
+            "model": "Novus10G",
+            "ip": "10.36.118.111",
+            "login":{
+                "userName":"admin",
+                "password":"admin"
+            },
+            "serialDev":"/dev/ttyUSBXX",
+            "baudrate": 115200,
+            "mediaMode":"mixed",
+            "links" : [
+                ["10.36.118.199:1:5", "agg1:swp1", "fiber"],
+                ["10.36.118.199:1:6", "agg1:swp2", "fiber"],
+                ["10.36.118.199:1:7", "agg1:swp3", "fiber"],
+                ["10.36.118.199:1:8", "agg1:swp4", "fiber"]
+            ]
+        }
+    ],
+    "operator" : "dent",
+    "topology" : "bachelor",
+    "force_discovery" : false
+}

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/DHCP

@@ -0,0 +1,6 @@
+#
+# ISC dhcpd configuration
+#
+
+
+option domain-name "dentlab-agg2";

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/HOSTNAME

@@ -0,0 +1 @@
+dentlab-agg2

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/HOSTS

@@ -0,0 +1,5 @@
+127.0.0.1       localhost
+::1             localhost ip6-localhost ip6-loopback
+ff02::1         ip6-allnodes
+ff02::2         ip6-allrouters
+127.0.1.1       dentlab-agg2

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/NETWORK_INTERFACES

@@ -0,0 +1,16 @@
+#
+# ONL format of dent interfaces
+#
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*.intf
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+    address 20.20.0.1/32
+
+# The management interface
+auto ma1
+iface ma1 inet dhcp

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/NTP

@@ -0,0 +1,59 @@
+# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
+
+
+driftfile /var/lib/ntp/ntp.drift
+
+
+# Enable this if you want statistics to be logged.
+#statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+
+# You do need to talk to an NTP server or two (or three).
+#server ntp.your-provider.example
+
+
+# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
+# pick a different set every time it starts up.  Please consider joining the
+# pool: <http://www.pool.ntp.org/join.html>
+#
+
+# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery
+restrict -6 default kod notrap nomodify nopeer noquery
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Clients from this (example!) subnet have unlimited access, but only if
+# cryptographically authenticated.
+#restrict 192.168.123.0 mask 255.255.255.0 notrust
+
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+#broadcast 192.168.123.255
+
+# If you want to listen to time broadcasts on your local subnet, de-comment the
+# next lines.  Please do this only if you trust everybody on the network!
+#disable auth
+#broadcastclient
+
+# Specify interfaces, don't listen on switch ports
+#interface listen ma1
+interface listen lo
+interface listen lo:0
+interface listen dummy0

DentOS_Framework/DentOsTestbed/configuration/testbed_config/hw/basic_agg2/agg2/QUAGGA_CONFIG

@@ -0,0 +1,11 @@
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+log timestamp precision 6
+!
+no zebra nexthop kernel enable
+!
+line vty
+!
+end