mt7620/: Original driver code.

mt7620/build/Kconfig

@@ -0,0 +1,202 @@
+config RT2860V2_AP
+	tristate "Ralink RT2860 802.11n AP support"
+#	depends on NET_RADIO 
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+
+config RT2860V2_AP_V24_DATA_STRUCTURE
+	bool
+	depends on RT2860V2_AP
+	default y
+
+config  RT2860V2_AP_LED
+	bool "LED Support"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_WSC
+	bool "WSC (WiFi Simple Config)"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_WSC_V2
+        bool "WSC 2.0(WiFi Simple Config 2.0)"
+        depends on RT2860V2_AP_WSC
+        default y
+
+config  RT2860V2_AP_LLTD
+	bool "LLTD (Link Layer Topology Discovery Protocol)"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_WDS
+	bool "WDS"
+	depends on RT2860V2_AP
+
+#config  RT2860V2_AP_WMM_ACM
+#	bool "WMM ACM"
+#	depends on RT2860V2_AP
+
+config  RT2860V2_AP_MBSS
+	bool "MBSSID"
+	depends on RT2860V2_AP
+
+config	NEW_MBSSID_MODE
+	bool "New MBSSID MODE"
+	depends on RT2860V2_AP
+	depends on RT2860V2_AP_MBSS
+	depends on RALINK_RT3883 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6352 || RALINK_MT7620
+	default n
+
+config  RT2860V2_AP_APCLI
+	bool "AP-CLient Support"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_MAC_REPEATER
+	bool "MAC Repeater Support"
+	depends on RT2860V2_AP
+	depends on RT2860V2_AP_APCLI
+	depends on RALINK_RT6352 || RALINK_MT7620
+	default n
+
+config  RT2860V2_AP_IGMP_SNOOP
+	bool "IGMP snooping"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_NETIF_BLOCK
+	bool "NETIF Block"
+	depends on RT2860V2_AP
+	help
+	Support Net interface block while Tx-Sw queue full
+
+config  RT2860V2_AP_DFS
+	bool "DFS"
+	depends on RT2860V2_AP
+	select RALINK_TIMER_DFS
+
+config  RT2860V2_AP_CARRIER
+	bool "Carrier Detect"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_DLS
+	bool "DLS ((Direct-Link Setup) Support"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_IDS
+	bool "IDS (Intrusion Detection System) Support"
+	depends on RT2860V2_AP
+
+config  RT2860V2_HW_ANTENNA_DIVERSITY
+	bool "Antenna Diversity Support"
+	depends on RT2860V2_AP
+	depends on RALINK_RT5350
+
+#config  RT2860V2_AP_WAPI
+#	bool "WAPI Support"
+#	depends on RT2860V2_AP
+
+config  RT2860V2_AP_COC
+	bool "CoC Support"
+	depends on RT2860V2_AP
+	default y
+
+config  RT2860V2_AP_MEMORY_OPTIMIZATION
+	bool "Memory Optimization"
+	depends on RT2860V2_AP
+
+config  RT2860V2_AP_VIDEO_TURBINE
+	bool "Video Turbine support"
+	depends on RT2860V2_AP
+
+config  RA_CLASSIFIER
+	tristate "Ralink Flow Classifier"
+	depends on RT2860V2_AP_VIDEO_TURBINE
+	default n
+
+config  RT2860V2_AP_INTELLIGENT_RATE_ADAPTION
+        bool "Intelligent Rate Adaption"
+	depends on RT2860V2_AP
+	depends on RALINK_RT2883 || RALINK_RT3883
+
+config  RT2860V2_AP_TXBF
+        bool "Tx Bean Forming Support (Only 3883)"
+	depends on RT2860V2_AP
+	depends on RALINK_RT2883 || RALINK_RT3883
+	default y
+
+#config  RT2860V2_EXT_CHANNEL_LIST
+#	bool "Extension Channel List"
+#	depends on RT2860V2_AP
+
+#config  RT2860V2_KTHREAD
+#	bool "Kernel Thread"
+#	depends on RT2860V2_AP
+
+#config  RT2860V2_AUTO_CH_SELECT_ENHANCE
+#	bool "Auto Channel Selection Enhancement"
+#	depends on RT2860V2_AP
+
+config  RT2860V2_AP_80211N_DRAFT3
+	bool "802.11n Draft3"
+	depends on RT2860V2_AP
+
+config BAND_STEERING
+	bool "Band Steering"
+	depends on RT2860V2_AP
+	default n
+
+#config  RT2860V2_AP_RTMP_INTERNAL_TX_ALC
+#        bool "TSSI Compensation"
+#        depends on RT2860V2_AP
+#        depends on RALINK_RT3350 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7620 || RALINK_RT6352
+#	default n
+
+config  RT2860V2_ADJ_PWR_CONSUMPTION_SUPPORT
+        bool "Adjust Power Consumption Support"
+        depends on RT2860V2_AP
+        depends on RALINK_MT7620 || RALINK_RT6352
+	default n
+
+config  RT2860V2_SINGLE_SKU
+	bool "Single SKU"
+	depends on RT2860V2_AP
+	default n
+
+choice
+	prompt "Choose Power Design"
+        depends on RALINK_MT7620 || RALINK_RT6352
+	default INTERNAL_PA_INTERNAL_LNA
+	config  INTERNAL_PA_INTERNAL_LNA
+	bool "Internal PA and Internal LNA"
+	config  INTERNAL_PA_EXTERNAL_LNA
+	bool "Internal PA and External LNA"		
+	config  EXTERNAL_PA_EXTERNAL_LNA
+	bool "External PA and External LNA"		
+endchoice
+
+config  RT2860V2_AP_RTMP_INTERNAL_TX_ALC
+        bool "TSSI Compensation"
+        depends on RT2860V2_AP
+        depends on RALINK_RT3350 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7620 || RALINK_RT6352
+        depends on INTERNAL_PA_INTERNAL_LNA || INTERNAL_PA_EXTERNAL_LNA
+	default n
+
+config  RT2860V2_AP_RTMP_TEMPERATURE_COMPENSATION
+        bool "Temperature Compensation"
+        depends on RT2860V2_AP
+        depends on RALINK_MT7620 || RALINK_RT6352
+	default n
+
+#config  RT2860V2_80211R_FT
+#	bool "802.11r Fast BSS Transition"
+#	depends on RT2860V2_AP
+
+#config  RT2860V2_80211R_RR
+#	bool "802.11k Radio Resource Management"
+#	depends on RT2860V2_AP
+
+#config  RT2860V2_MCAST_RATE_SPECIFIC
+#	bool "User specific tx rate of mcast pkt"
+#	depends on RT2860V2_AP
+
+#config  RT2860V2_SNMP
+#	bool "Net-SNMP Support"
+#	depends on RT2860V2_AP