Merge pull request #10641 from iNavFlight/mmosca-gf20

Add unofficial target for CADDXF4_AIO_ELRS

src/main/target/CADDXF4_AIO_ELRS/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32f405xg(CADDXF4_AIO_ELRS SKIP_RELEASES)

src/main/target/CADDXF4_AIO_ELRS/target.c

@@ -0,0 +1,39 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include <platform.h>
+#include "drivers/io.h"
+
+/*#include "drivers/dma.h"*/
+#include "drivers/timer.h"
+
+timerHardware_t timerHardware[] = {
+    // DEF_TIM(TIM4, CH3, PB8,  TIM_USE_PPM,                               0, 0), // PPM
+
+    // Motors
+    DEF_TIM(TIM3,  CH3,  PB0,  TIM_USE_OUTPUT_AUTO,      0, 0), // S1_OUT D1_ST7
+    DEF_TIM(TIM3,  CH4,  PB1,  TIM_USE_OUTPUT_AUTO,      0, 0), // S2_OUT D1_ST2
+    DEF_TIM(TIM8,  CH4,  PC9,  TIM_USE_OUTPUT_AUTO,      0, 0), // S3_OUT D1_ST6
+    DEF_TIM(TIM8,  CH3,  PC8,  TIM_USE_OUTPUT_AUTO,      0, 0), // S4_OUT D1_ST1
+
+    // LED strip
+    DEF_TIM(TIM4,  CH1, PB6,  TIM_USE_LED,                              0, 0), // D1_ST0
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/CADDXF4_AIO_ELRS/target.h

@@ -0,0 +1,165 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "CADX"
+#define USBD_PRODUCT_STRING     "CADDXF4_AIO_ELRS"
+
+//#define USE_ESC_SENSOR
+
+#define LED0                    PB5
+
+#define BEEPER                  PB4
+#define BEEPER_INVERTED
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN       CW180_DEG
+#define MPU6000_CS_PIN          PA4
+#define MPU6000_SPI_BUS		BUS_SPI1
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW180_DEG
+#define ICM42605_CS_PIN         PA4
+#define ICM42605_SPI_BUS        BUS_SPI1
+
+#define USE_BARO
+#define USE_BARO_ALL
+
+#define BMP280_SPI_BUS		BUS_SPI2
+#define BMP280_CS_PIN           PB3
+
+//#define USE_MAX7456
+//#define MAX7456_SPI_BUS		BUS_SPI2
+//#define MAX7456_CS_PIN      PB12
+////#define MAX7456_SPI_CLK         (SPI_CLOCK_STANDARD) // 10MHz // XXX
+////#define MAX7456_RESTORE_CLK     (SPI_CLOCK_FAST) // XXX
+
+#define M25P16_CS_PIN           PA15
+#define M25P16_SPI_BUS          BUS_SPI3
+
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+
+#define USE_VCP
+#define VBUS_SENSING_PIN        PC5
+#define VBUS_SENSING_ENABLED
+
+#define USE_UART_INVERTER
+
+#define USE_UART1
+#define UART1_RX_PIN            PA10
+#define UART1_TX_PIN            PA9
+#define UART1_AHB1_PERIPHERALS  RCC_AHB1Periph_DMA2
+
+#define USE_UART2
+#define UART2_RX_PIN            PA3
+#define UART2_TX_PIN            PA2
+// PC13 used as inverter select GPIO for UART2
+#define INVERTER_PIN_UART2_RX   PC13
+
+#define USE_UART3
+#define UART3_RX_PIN            PB11
+#define UART3_TX_PIN            PB10
+
+#define USE_UART6
+#define UART6_RX_PIN            PC7
+#define UART6_TX_PIN            PC6
+
+//#define USE_SOFTSERIAL1
+//#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5 //VCP, USART1, USART2, USART3, USART6, SOFTSERIAL1, SOFTSERIAL2
+
+//#define USE_ESCSERIAL // XXX
+//#define ESCSERIAL_TIMER_TX_PIN  PB8 // (Hardware=0, PPM)
+
+#define USE_SPI
+
+#define USE_SPI_DEVICE_1
+#define SPI1_NSS_PIN            NONE
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_SPI_DEVICE_2
+#define SPI2_NSS_PIN            PB12
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_SPI_DEVICE_3
+#define SPI3_NSS_PIN            PA15
+#define SPI3_SCK_PIN            PC10
+#define SPI3_MISO_PIN           PC11
+#define SPI3_MOSI_PIN           PC12
+
+#define USE_I2C
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL                PB10 // PB10, UART3_TX
+#define I2C2_SDA                PB11 // PB11, UART3_RX
+//#define I2C_DEVICE              (I2CDEV_2)
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C2
+#define USE_MAG_ALL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C2
+
+#define USE_BARO
+#define BARO_I2C_BUS             BUS_I2C2
+#define USE_BARO_BMP085
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+
+#define USE_PITOT_ADC
+#define PITOT_I2C_BUS           BUS_I2C2
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C2
+
+#define USE_ADC
+#define ADC_CHANNEL_1_PIN		    PC1
+#define ADC_CHANNEL_2_PIN		    PC2
+#define CURRENT_METER_ADC_CHANNEL	ADC_CHN_1
+#define VBAT_ADC_CHANNEL		    ADC_CHN_2
+
+#define USE_LED_STRIP
+#define WS2811_PIN                      PB6
+
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_UART           SERIAL_PORT_USART6
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+#define DEFAULT_FEATURES        (FEATURE_TX_PROF_SEL | FEATURE_VBAT | FEATURE_CURRENT_METER | FEATURE_TELEMETRY | FEATURE_OSD )
+
+#define USE_SPEKTRUM_BIND
+// USART3,
+#define BIND_PIN                PB11
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS 4
+
+#define USE_DSHOT
+#define USE_ESC_SENSOR