update charts/kustomize to use new release version

Signed-off-by: Michael Kalantar <kalantar@us.ibm.com>

.github/workflows/verifyuserexperience.yaml

@@ -30,13 +30,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 httpbin-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 httpbin-test iter8 \
         --set "tasks={http}" \
         --set http.url="http://httpbin.default/get" \
         --set logLevel=trace
@@ -77,13 +77,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 httpbin-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 httpbin-test iter8 \
         --set "tasks={http}" \
         --set http.url="http://httpbin.default/post" \
         --set http.payloadStr=hello \
@@ -126,13 +126,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 httpbin-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 httpbin-test iter8 \
         --set "tasks={http}" \
         --set http.endpoints.get.url=http://httpbin.default/get \
         --set http.endpoints.getAnything.url=http://httpbin.default/anything \
@@ -184,13 +184,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 routeguide-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 routeguide-test iter8 \
         --set "tasks={ready,grpc}" \
         --set ready.deploy=routeguide \
         --set ready.service=routeguide \
@@ -245,13 +245,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 routeguide-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 routeguide-test iter8 \
         --set "tasks={ready,grpc}" \
         --set ready.deploy=routeguide \
         --set ready.service=routeguide \
@@ -300,13 +300,13 @@ jobs:
 
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Start performance test
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 hello-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 hello-test iter8 \
         --set "tasks={grpc}" \
         --set grpc.host="hello.default:50051" \
         --set grpc.call="helloworld.Greeter.SayHello" \
@@ -344,7 +344,7 @@ jobs:
     # allowing ready task to be tested
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Create httpbin application
@@ -356,7 +356,7 @@ jobs:
     - name: k launch with readiness checks
       run: |
         helm upgrade --install \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 httpbin-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 httpbin-test iter8 \
         --set "tasks={ready,http}" \
         --set ready.deploy="httpbin" \
         --set ready.service="httpbin" \
@@ -396,7 +396,7 @@ jobs:
     # allowing ready task to be tested
     - name: Install controller
       run: |
-        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 0.18 --set logLevel=trace
+        helm install --repo https://iter8-tools.github.io/iter8 iter8 controller --version 1.1 --set logLevel=trace
         kubectl rollout status --watch --timeout=60s statefulset/iter8
 
     - name: Create httpbin application
@@ -412,7 +412,7 @@ jobs:
     - name: k launch with readiness checks and namespace
       run: |
         helm upgrade --install -n experiments \
-        --repo https://iter8-tools.github.io/iter8 --version 0.18 httpbin-test iter8 \
+        --repo https://iter8-tools.github.io/iter8 --version 1.1 httpbin-test iter8 \
         --set "tasks={ready,http}" \
         --set ready.deploy="httpbin" \
         --set ready.service="httpbin" \

bump-version-hints.md

@@ -0,0 +1,30 @@
+These instructions are a guide to making a new major or minor (not patch) release. The challenge is that charts refer to the image version. But this version is only created when the release is published. Consequently the following sequence of steps is needed:
+
+1. Modiyf only golang code (no version bump)
+    1. Do not change `MajorMinor` or `Version` in `base/util.go`
+
+Make new major/minor release
+
+2. Bump version references in `/charts` changes and bump `/charts/iter8` chart version (no changes to `/testdata`) and bump Kustomize files and bump verifyUserExperience workflow
+    1. The charts are modified to use the new image
+    2. The chart versions should be bumped to match the major/minor version (this is required for the `iter8` chart) but is desirable for all
+
+Merging the chart changes triggers a automatic chart releases
+
+3. Version bump golang and `/testdata` and other workflows
+    1. Bump `MajorMinor` or `Version` in `base/util.go`
+    2. Bump explicit version references in remaining workflows
+    3. Bump Dockerfile
+    5. Changes to `/testdata` is only a version bump in charts (`iter8.tools/version`)
+
+Make a release (new patch version)
+
+***
+
+At this point the documentation can be updated to refer to the new version. 
+Some things to change in the docs
+
+* `iter8.tools/version` in Kubernetes manifests samples
+* `--version` for any `helm upgrade` and `helm template` commands
+* `deleteiter8controller.md` and `installiter8controller.md`
+* Reference to `values.yaml`

charts/controller/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
 name: controller
-version: 0.18.5
+version: 1.1.0
 description: Iter8 controller controller
 type: application
 keywords:
@@ -16,4 +16,4 @@ maintainers:
 - name: Iter8
   email: iter8-tools@gmail.com
 icon: https://github.com/iter8-tools/iter8/raw/master/mkdocs/docs/images/favicon.png
-appVersion: v0.18
+appVersion: v1.1

charts/controller/values.yaml

@@ -1,5 +1,5 @@
 ### Controller image
-image: iter8/iter8:0.18
+image: iter8/iter8:1.1
 replicas: 1
 
 ### default resync time for controller

charts/iter8/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
 name: iter8
-version: 0.18.0
+version: 1.1.0
 description: Iter8 experiment chart
 type: application
 home: https://iter8.tools

charts/iter8/values.yaml

@@ -1,8 +1,8 @@
 ### iter8Image default iter8 image used for running Kubernetes experiments
-iter8Image: iter8/iter8:0.18
+iter8Image: iter8/iter8:1.1
 
 ### majorMinor is the minor version of Iter8
-majorMinor: v0.18
+majorMinor: v1.1
 
 logLevel: info
 

charts/release/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
 name: release
-version: 0.18.5
+version: 1.1.0
 description: Iter8 supported application release
 type: application
 keywords:
@@ -18,4 +18,4 @@ maintainers:
 - name: Iter8
   email: iter8-tools@gmail.com
 icon: https://github.com/iter8-tools/iter8/raw/master/mkdocs/docs/images/favicon.png
-appVersion: v0.18
+appVersion: v1.1

charts/release/values.yaml

@@ -1,6 +1,6 @@
 # iter8Version is the minor version of Iter8
 # should be specified as the value of the iter8.tools/version label on all routemaps
-iter8Version: v0.18
+iter8Version: v1.1
 
 # default Istio Gateway name
 istioGateway: my-gateway

kustomize/controller/clusterScoped/kustomization.yaml

@@ -32,7 +32,7 @@ patches:
       value: |
         clusterScoped: true
         defaultResync: 15m
-        image: iter8/iter8:0.18
+        image: iter8/iter8:1.1
         logLevel: info
         resourceTypes:
           cm:

kustomize/controller/namespaceScoped/configmap.yaml

@@ -5,7 +5,7 @@ metadata:
 data:
   config.yaml: |
     defaultResync: 15m
-    image: iter8/iter8:0.18
+    image: iter8/iter8:1.1
     logLevel: info
     resourceTypes:
       cm:

kustomize/controller/namespaceScoped/kustomization.yaml

@@ -9,4 +9,4 @@ resources:
 
 commonLabels:
   app.kubernetes.io/name: controller
-  app.kubernetes.io/version: v0.18
+  app.kubernetes.io/version: v1.1

kustomize/controller/namespaceScoped/statefulset.yaml

@@ -16,7 +16,7 @@ spec:
       serviceAccountName: iter8
       containers:
       - name: iter8-controller
-        image: iter8/iter8:0.18
+        image: iter8/iter8:1.1
         imagePullPolicy: Always
         command: ["/bin/iter8"]
         args: ["controllers", "-l", "info"]