Skip to content

Networking plugin repository for pod networking in Kubernetes using Elastic Network Interfaces on AWS

License

Notifications You must be signed in to change notification settings

iziang/amazon-vpc-cni-k8s

 
 

Repository files navigation

amazon-vpc-cni-k8s

Networking plugin for pod networking in Kubernetes using Elastic Network Interfaces on AWS.

Nightly Tests GoReport Widget codecov

Setup

Download the latest version of the yaml and apply it to the cluster.

kubectl apply -f aws-k8s-cni.yaml

Launch kubelet with network plugins set to cni (--network-plugin=cni), the cni directories configured (--cni-config-dir and --cni-bin-dir) and node ip set to the primary IPv4 address of the primary ENI for the instance (--node-ip=$(curl http://169.254.169.254/latest/meta-data/local-ipv4)). It is also recommended that you set --max-pods equal to (the number of ENIs for the instance type × (the number of IPs per ENI - 1)) + 2; for details, see vpc_ip_resource_limit.go. Setting --max-pods will prevent scheduling that exceeds the IP address resources available to the kubelet.

The default manifest expects --cni-conf-dir=/etc/cni/net.d and --cni-bin-dir=/opt/cni/bin.

Alternatively there is also a Helm chart: eks/aws-vpc-cni

IAM Policy

See here for required IAM policies.

Building

  • make defaults to make build-linux that builds the Linux binaries.
  • unit-test, format,lint and vet provide ways to run the respective tests/tools and should be run before submitting a PR.
  • make docker will create a docker container using the docker-build with the finished binaries, with a tag of amazon/amazon-k8s-cni:latest
  • make docker-build uses a docker container (golang:1.16) to build the binaries.
  • make docker-unit-tests uses a docker container (golang:1.16) to run all unit tests.

Components

There are 2 components:

  • CNI Plugin, which will wire up the host's and pod's network stack when called.
  • ipamd, a long-running node-Local IP Address Management (IPAM) daemon, is responsible for:
    • maintaining a warm-pool of available IP addresses, and
    • assigning an IP address to a Pod.

The details can be found in Proposal: CNI plugin for Kubernetes networking over AWS VPC.

Troubleshooting Guide provides tips on how to debug and troubleshoot this CNI.

ENI Allocation

When a worker node first joins the cluster, there is only 1 ENI along with all of its addresses in the ENI. Without any configuration, ipamd always tries to keep one extra ENI.

When the number of pods running on the node exceeds the number of addresses on a single ENI, the CNI backend starts allocating a new ENI using the following allocation scheme:

  • If the number of current running Pods is between 0 and 29, ipamd will allocate one more eni. And Warm-Pool size is 2 eni * (30 -1) = 58
  • If the number of current running Pods is between 30 and 58, ipamd will allocate 2 more eni. And Warm-Pool size is 3 eni * (30 -1) = 87

For example, a m4.4xlarge node can have up to 8 ENIs, and each ENI can have up to 30 IP addresses. See Elastic Network Interfaces documentation for details.

For a detailed explanation, see WARM_ENI_TARGET, WARM_IP_TARGET and MINIMUM_IP_TARGET.

CNI Configuration Variables

The Amazon VPC CNI plugin for Kubernetes supports a number of configuration options, which are set through environment variables. The following environment variables are available, and all of them are optional.


AWS_VPC_CNI_NODE_PORT_SUPPORT

Type: Boolean as a String

Default: true

Specifies whether NodePort services are enabled on a worker node's primary network interface. This requires additional iptables rules, and the kernel's reverse path filter on the primary interface is set to loose.


AWS_VPC_K8S_CNI_CUSTOM_NETWORK_CFG

Type: Boolean as a String

Default: false

Specifies that your pods may use subnets and security groups that are independent of your worker node's VPC configuration. By default, pods share the same subnet and security groups as the worker node's primary interface. Setting this variable to true causes ipamd to use the security groups and VPC subnet in a worker node's ENIConfig for elastic network interface allocation. You must create an ENIConfig custom resource for each subnet that your pods will reside in, and then annotate or label each worker node to use a specific ENIConfig. Multiple worker nodes can be annotated or labelled with the same ENIConfig, but each Worker node can be annotated with a single ENIConfig at a time. Further, the subnet in the ENIConfig must belong to the same Availability Zone that the worker node resides in. For more information, see CNI Custom Networking in the Amazon EKS User Guide.


ENI_CONFIG_ANNOTATION_DEF

Type: String

Default: k8s.amazonaws.com/eniConfig

Specifies node annotation key name. This should be used when AWS_VPC_K8S_CNI_CUSTOM_NETWORK_CFG=true. Annotation value will be used to set ENIConfig name. Note that annotations take precedence over labels.


ENI_CONFIG_LABEL_DEF

Type: String

Default: k8s.amazonaws.com/eniConfig

Specifies node label key name. This should be used when AWS_VPC_K8S_CNI_CUSTOM_NETWORK_CFG=true. Label value will be used to set ENIConfig name. Note that annotations will take precedence over labels. To use labels, ensure there is no annotation with key k8s.amazonaws.com/eniConfig or defined key (in ENI_CONFIG_ANNOTATION_DEF) set on the node. To select an ENIConfig based upon availability zone set this to failure-domain.beta.kubernetes.io/zone and create an ENIConfig custom resource for each availability zone (e.g. us-east-1a).


AWS_VPC_ENI_MTU (v1.6.0+)

Type: Integer as a String

Default: 9001

Used to configure the MTU size for attached ENIs. The valid range is from 576 to 9001.


AWS_VPC_K8S_CNI_EXTERNALSNAT

Type: Boolean as a String

Default: false

Specifies whether an external NAT gateway should be used to provide SNAT of secondary ENI IP addresses. If set to true, the SNAT iptables rule and off-VPC IP rule are not applied, and these rules are removed if they have already been applied. Disable SNAT if you need to allow inbound communication to your pods from external VPNs, direct connections, and external VPCs, and your pods do not need to access the Internet directly via an Internet Gateway. However, your nodes must be running in a private subnet and connected to the internet through an AWS NAT Gateway or another external NAT device.


AWS_VPC_K8S_CNI_RANDOMIZESNAT

Type: String

Default: prng

Valid Values: hashrandom, prng, none

Specifies whether the SNAT iptables rule should randomize the outgoing ports for connections. This setting takes effect when AWS_VPC_K8S_CNI_EXTERNALSNAT=false, which is the default setting. The default setting for AWS_VPC_K8S_CNI_RANDOMIZESNAT is prng, meaning that --random-fully will be added to the SNAT iptables rule. For old versions of iptables that do not support --random-fully this option will fall back to --random. To disable random port allocation, if you for example rely on sequential port allocation for outgoing connections set it to none.

Note: Any options other than none will cause outbound connections to be assigned a source port that is not necessarily part of the ephemeral port range set at the OS level (/proc/sys/net/ipv4/ip_local_port_range). This is relevant for any customers that might have NACLs restricting traffic based on the port range found in ip_local_port_range.


AWS_VPC_K8S_CNI_EXCLUDE_SNAT_CIDRS (v1.6.0+)

Type: String

Default: empty

Specify a comma-separated list of IPv4 CIDRs to exclude from SNAT. For every item in the list an iptables rule and off-VPC IP rule will be applied. If an item is not a valid ipv4 range it will be skipped. This should be used when AWS_VPC_K8S_CNI_EXTERNALSNAT=false.


WARM_ENI_TARGET

Type: Integer as a String

Default: 1

Specifies the number of free elastic network interfaces (and all of their available IP addresses) that the ipamd daemon should attempt to keep available for pod assignment on the node. By default, ipamd attempts to keep 1 elastic network interface and all of its IP addresses available for pod assignment. The number of IP addresses per network interface varies by instance type. For more information, see IP Addresses Per Network Interface Per Instance Type in the Amazon EC2 User Guide for Linux Instances.

For example, an m4.4xlarge launches with 1 network interface and 30 IP addresses. If 5 pods are placed on the node and 5 free IP addresses are removed from the IP address warm pool, then ipamd attempts to allocate more interfaces until WARM_ENI_TARGET free interfaces are available on the node. If WARM_IP_TARGET is set, then this environment variable is ignored and the WARM_IP_TARGET behavior is used instead.


WARM_IP_TARGET

Type: Integer

Default: None

Specifies the number of free IP addresses that the ipamd daemon should attempt to keep available for pod assignment on the node. Setting this to a non-positive value is the same as setting this to 0 or not setting the variable. With ENABLE_PREFIX_DELEGATION set to true then ipamd daemon will check if the existing (/28) prefixes are enough to maintain the WARM_IP_TARGET if it is not sufficient then more prefixes will be attached.

For example,

  1. if WARM_IP_TARGET is set to 5, then ipamd attempts to keep 5 free IP addresses available at all times. If the elastic network interfaces on the node are unable to provide these free addresses, ipamd attempts to allocate more interfaces until WARM_IP_TARGET free IP addresses are available.
  2. ENABLE_PREFIX_DELEGATION set to true and WARM_IP_TARGET is 16. Initially, 1 (/28) prefix is sufficient but once a single pod is assigned IP then remaining free IPs are 15 hence IPAMD will allocate 1 more prefix to achieve 16 WARM_IP_TARGET

NOTE! Avoid this setting for large clusters, or if the cluster has high pod churn. Setting it will cause additional calls to the EC2 API and that might cause throttling of the requests. It is strongly suggested to set MINIMUM_IP_TARGET when using WARM_IP_TARGET.

If both WARM_IP_TARGET and MINIMUM_IP_TARGET are set, ipamd will attempt to meet both constraints. This environment variable overrides WARM_ENI_TARGET behavior. For a detailed explanation, see WARM_ENI_TARGET, WARM_IP_TARGET and MINIMUM_IP_TARGET.

If ENABLE_PREFIX_DELEGATION set to true and WARM_IP_TARGET overrides WARM_PREFIX_TARGET behavior. For a detailed explanation, see WARM_PREFIX_TARGET, WARM_IP_TARGET and MINIMUM_IP_TARGET.


MINIMUM_IP_TARGET (v1.6.0+)

Type: Integer

Default: None

Specifies the number of total IP addresses that the ipamd daemon should attempt to allocate for pod assignment on the node. MINIMUM_IP_TARGET behaves identically to WARM_IP_TARGET except that instead of setting a target number of free IP addresses to keep available at all times, it sets a target number for a floor on how many total IP addresses are allocated. Setting to a non-positive value is same as setting this to 0 or not setting the variable.

MINIMUM_IP_TARGET is for pre-scaling, WARM_IP_TARGET is for dynamic scaling. For example, suppose a cluster has an expected pod density of approximately 30 pods per node. If WARM_IP_TARGET is set to 30 to ensure there are enough IPs allocated up front by the CNI, then 30 pods are deployed to the node, the CNI will allocate an additional 30 IPs, for a total of 60, accelerating IP exhaustion in the relevant subnets. If instead MINIMUM_IP_TARGET is set to 30 and WARM_IP_TARGET to 2, after the 30 pods are deployed the CNI would allocate an additional 2 IPs. This still provides elasticity, but uses roughly half as many IPs as using WARM_IP_TARGET alone (32 IPs vs 60 IPs).

This also improves the reliability of the EKS cluster by reducing the number of calls necessary to allocate or deallocate private IPs, which may be throttled, especially at scaling-related times.


MAX_ENI

Type: Integer

Default: None

Specifies the maximum number of ENIs that will be attached to the node. When MAX_ENI is unset or 0 (or lower), the setting is not used, and the maximum number of ENIs is always equal to the maximum number for the instance type in question. Even when MAX_ENI is a positive number, it is limited by the maximum number for the instance type.


AWS_VPC_K8S_CNI_LOGLEVEL

Type: String

Default: DEBUG

Valid Values: DEBUG, INFO, WARN, ERROR, FATAL. (Not case sensitive)

Specifies the loglevel for ipamd.


AWS_VPC_K8S_CNI_LOG_FILE

Type: String

Default: /host/var/log/aws-routed-eni/ipamd.log

Valid Values: stdout or a file path

Specifies where to write the logging output of ipamd. Either to stdout or to override the default file (i.e., /var/log/aws-routed-eni/ipamd.log).


AWS_VPC_K8S_PLUGIN_LOG_FILE

Type: String

Default: /var/log/aws-routed-eni/plugin.log

Valid Values: stderr or a file path

Specifies where to write the logging output for aws-cni plugin. Either to stderr or to override the default file (i.e., /var/log/aws-routed-eni/plugin.log). Stdout cannot be supported for plugin log, please refer to #1248 for more details.

Note: If chaining an external plugin (i.e Cilium) that does not provide a pluginLogFile in its config file, the CNI plugin will by default write to os.Stderr. The output of cmdAdd are available in the Kubelet logs.


AWS_VPC_K8S_PLUGIN_LOG_LEVEL

Type: String

Default: DEBUG

Valid Values: DEBUG, INFO, WARN, ERROR, FATAL. (Not case sensitive)

Specifies the loglevel for aws-cni plugin.


INTROSPECTION_BIND_ADDRESS

Type: String

Default: 127.0.0.1:61679

Specifies the bind address for the introspection endpoint.

A Unix Domain Socket can be specified with the unix: prefix before the socket path.


DISABLE_INTROSPECTION

Type: Boolean as a String

Default: false

Specifies whether introspection endpoints are disabled on a worker node. Setting this to true will reduce the debugging information we can get from the node when running the aws-cni-support.sh script.


DISABLE_METRICS

Type: Boolean as a String

Default: false

Specifies whether the prometheus metrics endpoint is disabled or not for ipamd. By default metrics are published on :61678/metrics.


AWS_VPC_K8S_CNI_VETHPREFIX

Type: String

Default: eni

Specifies the veth prefix used to generate the host-side veth device name for the CNI. The prefix can be at most 4 characters long. The prefixes eth, vlan, and lo are reserved by the CNI plugin and cannot be specified. We recommend using prefix name not shared by any other network interfaces on the worker node instance.


ADDITIONAL_ENI_TAGS (v1.6.0+)

Type: String

Default: {}

Example values: {"tag_key": "tag_val"}

Metadata applied to ENI helps you categorize and organize your resources for billing or other purposes. Each tag consists of a custom-defined key and an optional value. Tag keys can have a maximum character length of 128 characters. Tag values can have a maximum length of 256 characters. These tags will be added to all ENIs on the host.

Important: Custom tags should not contain k8s.amazonaws.com prefix as it is reserved. If the tag has k8s.amazonaws.com string, tag addition will be ignored.


AWS_VPC_K8S_CNI_CONFIGURE_RPFILTER

Type: Boolean as a String

Default: true

Specifies whether ipamd should configure rp filter for primary interface. Setting this to false will require rp filter to be configured through init container


CLUSTER_NAME

Type: String

Default: ""

Specifies the cluster name to tag allocated ENIs with. See the "Cluster Name tag" section below.


ENABLE_POD_ENI (v1.7.0+)

Type: Boolean as a String

Default: false

To enable security groups for pods you need to have at least an EKS 1.17 eks.3 cluster.

Setting ENABLE_POD_ENI to true will allow IPAMD to add the vpc.amazonaws.com/has-trunk-attached label to the node if the instance has the capacity to attach an additional ENI.

The label notifies vpc-resource-controller (https://github.com/aws/amazon-vpc-resource-controller-k8s) to attach a Trunk ENI to the instance. The label value is initially set to false and is marked to true by IPAMD when vpc-resource-controller attaches a Trunk ENI to the instance. However, there might be cases where the label value will remain false if the instance doesn't support ENI Trunking.

Once enabled the VPC resource controller will then advertise branch network interfaces as extended resources on these nodes in your cluster. Branch interface capacity is additive to existing instance type limits for secondary IP addresses and prefixes. For example, a c5.4xlarge can continue to have up to 234 secondary IP addresses or 234 /28 prefixes assigned to standard network interfaces and up to 54 branch network interfaces. Each branch network interface only receives a single primary IP address and this IP address will be allocated to pods with a security group(branch ENI pods).

Any of the WARM targets do not impact the scale of the branch ENI pods so you will have to set the WARM_{ENI/IP/PREFIX}_TARGET based on the number of non-branch ENI pods. If you are having the cluster mostly using pods with a security group consider setting WARM_IP_TARGET to a very low value instead of default WARM_ENI_TARGET or WARM_PREFIX_TARGET to reduce wastage of IPs/ENIs.

NOTE! Toggling ENABLE_POD_ENI from true to false will not detach the Trunk ENI from an instance. To delete/detach the Trunk ENI from an instance, you need to recycle the instance.


POD_SECURITY_GROUP_ENFORCING_MODE (v1.11.0+)

Type: String

Default: strict

Valid Values: strict, standard

Once ENABLE_POD_ENI is set to true, this value controls how the traffic of pods with the security group behaves.

  • strict mode: all inbound/outbound traffic from pod with security group will be enforced by security group rules. This is the default mode if POD_SECURITY_GROUP_ENFORCING_MODE is not set.

  • standard mode: the traffic of pod with security group behaves same as pods without a security group, except that each pod occupies a dedicated branch ENI.

    • inbound traffic to pod with security group from another host will be enforced by security group rules.
    • outbound traffic from pod with security group to another host in the same VPC will be enforced by security group rules.
    • inbound/outbound traffic from another pod on the same host or another service on the same host(such as kubelet/nodeLocalDNS) won't be enforced by security group rules.
    • outbound traffic from pod with security group to IP address outside VPC
      • if externalSNAT enabled, traffic won't be SNATed, thus will be enforced by security group rules.
      • if externalSNAT disabled, traffic will be SNATed via eth0, thus will only be enforced by the security group associated with eth0.

NOTE!: To make new behavior be in effect after switching the mode, existing pods with security group must be recycled. Alternatively, you can restart the nodes as well.


DISABLE_TCP_EARLY_DEMUX (v1.7.3+)

Type: Boolean as a String

Default: false

If ENABLE_POD_ENI is set to true, for the kubelet to connect via TCP (for liveness or readiness probes) to pods that are using per pod security groups, DISABLE_TCP_EARLY_DEMUX should be set to true for amazon-k8s-cni-init the container under initcontainers. This will increase the local TCP connection latency slightly. Details on why this is needed can be found in this #1212 comment. To use this setting, a Linux kernel version of at least 4.6 is needed on the worker node.

You can use the below command to enable DISABLE_TCP_EARLY_DEMUX to true -

kubectl patch daemonset aws-node -n kube-system -p '{"spec": {"template": {"spec": {"initContainers": [{"env":[{"name":"DISABLE_TCP_EARLY_DEMUX","value":"true"}],"name":"aws-vpc-cni-init"}]}}}}'

ENABLE_PREFIX_DELEGATION (v1.9.0+)

Type: Boolean as a String

Default: false

To enable prefix delegation on nitro instances. Setting ENABLE_PREFIX_DELEGATION to true will start allocating a prefix (/28 for IPv4 and /80 for IPv6) instead of a secondary IP in the ENIs subnet. The total number of prefixes and private IP addresses will be less than the limit on private IPs allowed by your instance. Setting or resetting of ENABLE_PREFIX_DELEGATION while pods are running or if ENIs are attached is supported and the new pods allocated will get IPs based on the mode of IPAMD but the max pods of kubelet should be updated which would need either kubelet restart or node recycle.

Setting ENABLE_PREFIX_DELEGATION to true will not increase the density of branch ENI pods. The limit on the number of branch network interfaces per instance type will remain the same - https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html#supported-instance-types. Each branch network will be allocated a primary IP and this IP will be allocated for the branch ENI pods.

Please refer to VPC CNI Feature Matrix section below for additional information around using Prefix delegation with Custom Networking and Security Groups Per Pod features.

Note: ENABLE_PREFIX_DELEGATION needs to be set to true when VPC CNI is configured to operate in IPv6 mode (supported in v1.10.0+). Prefix Delegation in IPv4 and IPv6 modes is supported on Nitro based Bare Metal instances as well from v1.11+. If you're using Prefix Delegation feature on Bare Metal instances, downgrading to an earlier version of VPC CNI from v1.11+ will be disruptive and not supported.


WARM_PREFIX_TARGET (v1.9.0+)

Type: Integer

Default: None

Specifies the number of free IPv4(/28) prefixes that the ipamd daemon should attempt to keep available for pod assignment on the node. Setting to a non-positive value is same as setting this to 0 or not setting the variable. This environment variable works when ENABLE_PREFIX_DELEGATION is set to true and is overridden when WARM_IP_TARGET and MINIMUM_IP_TARGET are configured.


DISABLE_NETWORK_RESOURCE_PROVISIONING (v1.9.1+)

Type: Boolean as a String

Default: false

Setting DISABLE_NETWORK_RESOURCE_PROVISIONING to true will make IPAMD depend only on IMDS to get attached ENIs and IPs/prefixes.


ENABLE_BANDWIDTH_PLUGIN (v1.10.0+)

Type: Boolean as a String

Default: false

Setting ENABLE_BANDWIDTH_PLUGIN to true will update 10-aws.conflist to include upstream bandwidth plugin as a chained plugin.


ANNOTATE_POD_IP (v1.9.3+)

Type: Boolean as a String

Default: false

Setting ANNOTATE_POD_IP to true will allow IPAMD to add an annotation vpc.amazonaws.com/pod-ips to the pod with pod IP.

There is a known issue with kubelet taking time to update Pod.Status.PodIP leading to calico being blocked on programming the policy. Setting ANNOTATE_POD_IP to true will enable AWS VPC CNI plugin to add Pod IP as an annotation to the pod spec to address this race condition.

To annotate the pod with pod IP, you will have to add "patch" permission for pods resource in aws-node clusterrole. You can use the below command -

cat << EOF > append.yaml
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - patch
EOF
kubectl apply -f <(cat <(kubectl get clusterrole aws-node -o yaml) append.yaml)

ENABLE_IPv4 (v1.10.0+)

Type: Boolean as a String

Default: true

VPC CNI can operate in either IPv4 or IPv6 mode. Setting ENABLE_IPv4 to true will configure it in IPv4 mode (default mode).

Note: Dual-stack mode isn't yet supported. So, enabling both IPv4 and IPv6 will be treated as an invalid configuration.


ENABLE_IPv6 (v1.10.0+)

Type: Boolean as a String

Default: false

VPC CNI can operate in either IPv4 or IPv6 mode. Setting ENABLE_IPv6 to true (both under aws-node and aws-vpc-cni-init containers in the manifest) will configure it in IPv6 mode. IPv6 is only supported in Prefix Delegation mode, so ENABLE_PREFIX_DELEGATION needs to be set to true if VPC CNI is configured to operate in IPv6 mode. Prefix delegation is only supported on nitro instances.

Note: Please make sure that the required IPv6 IAM policy is applied (Refer to IAM Policy section above). Dual stack mode isn't yet supported. So, enabling both IPv4 and IPv6 will be treated as invalid configuration. Please refer to the VPC CNI Feature Matrix section below for additional information.


VPC CNI Feature Matrix

IP Mode Secondary IP Mode Prefix Delegation Security Groups Per Pod WARM & MIN IP/Prefix Targets External SNAT
IPv4 Yes Yes Yes Yes Yes
IPv6 No Yes No No No

ENI tags related to Allocation

This plugin interacts with the following tags on ENIs:

  • cluster.k8s.amazonaws.com/name
  • node.k8s.amazonaws.com/instance_id
  • node.k8s.amazonaws.com/no_manage

Cluster Name tag

The tag cluster.k8s.amazonaws.com/name will be set to the cluster name of the aws-node daemonset which created the ENI.

Instance ID tag

The tag node.k8s.amazonaws.com/instance_id will be set to the instance ID of the aws-node instance that allocated this ENI.

No Manage tag

The tag node.k8s.amazonaws.com/no_manage is read by the aws-node daemonset to determine whether an ENI attached to the machine should not be configured or used for private IPs.

This tag is not set by the cni plugin itself, but rather may be set by a user to indicate that an ENI is intended for host networking pods, or for some other process unrelated to Kubernetes.

Note: Attaching an ENI with the no_manage tag will result in an incorrect value for the Kubelet's --max-pods configuration option. Consider also updating the MAX_ENI and --max-pods configuration options on this plugin and the kubelet respectively if you are making use of this tag.

Container Runtime

Currently, IPAMD uses dockershim socket to pull pod sandboxes information upon its starting. The runtime can be set to others. The mountPath should be changed to /var/run/cri.sock and hostPath should be pointed to the wanted socket, such as /var/run/containerd/containerd.sock for containerd. If using helm chart, the flag --set cri.hostPath.path=/var/run/containerd/containerd.sock can set the paths for you.

Note:

  • When using a different container runtime instead of dockershim in VPC CNI, make sure kubelet is also configured to use the same CRI.
  • If you want to enable containerd runtime with the support provided by Amazon AMI, please follow the instructions in our documentation, Enable the containerd runtime bootstrap flag

Notes

L-IPAMD(aws-node daemonSet) running on every worker node requires access to the Kubernetes API server. If it can not reach the Kubernetes API server, ipamd will exit and CNI will not be able to get any IP address for Pods. Here is a way to confirm if aws-node has access to the Kubernetes API server.

# find out Kubernetes service IP, e.g. 10.0.0.1
kubectl get svc Kubernetes
NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
kubernetes   ClusterIP   10.0.0.1   <none>        443/TCP   29d

# ssh into worker node, check if worker node can reach API server
telnet 10.0.0.1 443
Trying 10.0.0.1...
Connected to 10.0.0.1.
Escape character is '^]'.  <-------- Kubernetes API server is reachable

Security disclosures

If you think you’ve found a potential security issue, please do not post it in the Issues. Instead, please follow the instructions here or email AWS security directly.

Contributing

See CONTRIBUTING.md

About

Networking plugin repository for pod networking in Kubernetes using Elastic Network Interfaces on AWS

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 90.9%
  • Shell 6.5%
  • Makefile 1.2%
  • Jsonnet 0.8%
  • Mustache 0.3%
  • Smarty 0.2%
  • Dockerfile 0.1%