#2 Základní struktura projektu

 - create project structure
 - add project solution

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

hodnoceni.txt

@@ -0,0 +1,3 @@
+xjelin42 33
+xkader13 33
+xzeman53 33

src/Calculator/.gitignore

@@ -0,0 +1,5 @@
+.vs
+Calculator/bin
+Calculator/obj
+MathLib/bin
+MathLib/obj

src/Calculator/Calculator.sln

@@ -0,0 +1,28 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 14
+VisualStudioVersion = 14.0.25420.1
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Calculator", "Calculator\Calculator.csproj", "{90A58C11-4CC1-4023-9E4D-8881020AD54C}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "MathLib", "MathLib\MathLib.csproj", "{9A484F30-4E61-4F4E-BA54-026AB5A8445E}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{90A58C11-4CC1-4023-9E4D-8881020AD54C}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{90A58C11-4CC1-4023-9E4D-8881020AD54C}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{90A58C11-4CC1-4023-9E4D-8881020AD54C}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{90A58C11-4CC1-4023-9E4D-8881020AD54C}.Release|Any CPU.Build.0 = Release|Any CPU
+		{9A484F30-4E61-4F4E-BA54-026AB5A8445E}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{9A484F30-4E61-4F4E-BA54-026AB5A8445E}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{9A484F30-4E61-4F4E-BA54-026AB5A8445E}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{9A484F30-4E61-4F4E-BA54-026AB5A8445E}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

src/Calculator/Calculator/App.config

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5.2" />
+    </startup>
+</configuration>

src/Calculator/Calculator/App.xaml

@@ -0,0 +1,9 @@
+<Application x:Class="Calculator.App"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:Calculator"
+             StartupUri="CalculatorWindow.xaml">
+    <Application.Resources>
+
+    </Application.Resources>
+</Application>

src/Calculator/Calculator/App.xaml.cs

@@ -0,0 +1,17 @@
+using System;
+using System.Collections.Generic;
+using System.Configuration;
+using System.Data;
+using System.Linq;
+using System.Threading.Tasks;
+using System.Windows;
+
+namespace Calculator
+{
+    /// <summary>
+    /// Interaction logic for App.xaml
+    /// </summary>
+    public partial class App : Application
+    {
+    }
+}

src/Calculator/Calculator/Calculator.csproj

@@ -0,0 +1,113 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="14.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{90A58C11-4CC1-4023-9E4D-8881020AD54C}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>Calculator</RootNamespace>
+    <AssemblyName>Calculator</AssemblyName>
+    <TargetFrameworkVersion>v4.5.2</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <ProjectTypeGuids>{60dc8134-eba5-43b8-bcc9-bb4bc16c2548};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
+    <WarningLevel>4</WarningLevel>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xaml">
+      <RequiredTargetFramework>4.0</RequiredTargetFramework>
+    </Reference>
+    <Reference Include="WindowsBase" />
+    <Reference Include="PresentationCore" />
+    <Reference Include="PresentationFramework" />
+  </ItemGroup>
+  <ItemGroup>
+    <ApplicationDefinition Include="App.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </ApplicationDefinition>
+    <Compile Include="ViewModel\Commands\RelayCommand.cs" />
+    <Compile Include="ViewModel\MainViewModel.cs" />
+    <Page Include="CalculatorWindow.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
+    <Compile Include="App.xaml.cs">
+      <DependentUpon>App.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="CalculatorWindow.xaml.cs">
+      <DependentUpon>CalculatorWindow.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Properties\AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+    </EmbeddedResource>
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <AppDesigner Include="Properties\" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <ItemGroup>
+    <Folder Include="Controls\UserControls\" />
+    <Folder Include="Model\" />
+    <Folder Include="ViewModel\Converters\" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>

src/Calculator/Calculator/CalculatorWindow.xaml

@@ -0,0 +1,12 @@
+<Window x:Class="Calculator.MainWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:local="clr-namespace:Calculator"
+        mc:Ignorable="d"
+        Title="Calculator" Height="500" Width="350" Topmost="True">
+    <Grid>
+
+    </Grid>
+</Window>

src/Calculator/Calculator/CalculatorWindow.xaml.cs

@@ -0,0 +1,28 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows;
+using System.Windows.Controls;
+using System.Windows.Data;
+using System.Windows.Documents;
+using System.Windows.Input;
+using System.Windows.Media;
+using System.Windows.Media.Imaging;
+using System.Windows.Navigation;
+using System.Windows.Shapes;
+
+namespace Calculator
+{
+    /// <summary>
+    /// Interaction logic for CalculatorWindow.xaml
+    /// </summary>
+    public partial class MainWindow : Window
+    {
+        public MainWindow()
+        {
+            InitializeComponent();
+        }
+    }
+}

src/Calculator/Calculator/Properties/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Resources;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+using System.Windows;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Calculator")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Calculator")]
+[assembly: AssemblyCopyright("Copyright ©  2017")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+//In order to begin building localizable applications, set 
+//<UICulture>CultureYouAreCodingWith</UICulture> in your .csproj file
+//inside a <PropertyGroup>.  For example, if you are using US english
+//in your source files, set the <UICulture> to en-US.  Then uncomment
+//the NeutralResourceLanguage attribute below.  Update the "en-US" in
+//the line below to match the UICulture setting in the project file.
+
+//[assembly: NeutralResourcesLanguage("en-US", UltimateResourceFallbackLocation.Satellite)]
+
+
+[assembly: ThemeInfo(
+    ResourceDictionaryLocation.None, //where theme specific resource dictionaries are located
+                                     //(used if a resource is not found in the page, 
+                                     // or application resource dictionaries)
+    ResourceDictionaryLocation.SourceAssembly //where the generic resource dictionary is located
+                                              //(used if a resource is not found in the page, 
+                                              // app, or any theme specific resource dictionaries)
+)]
+
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers 
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]