jaschac/cntlm

Overview

A Docker image that deploys the cNTLM authentication proxy, building it from the source. Please, do refer to the official cNTLM documentation for more details.

Image Description

The jaschac/cntlm image is meant to allow containers to access the Internet through a proxy. As such:

No plain text credential is exposed. Only the cNTLM container knows how to get through the proxy and the password is encrypted.
In case the details to pass through the proxy change, only one container must be updated.
All containers can access the Internet simply linking to that executed from jaschac/cntlm and referring to it as the proxy during queries.

How does jaschac/cntlm differ from other cNTLM images

The typical scenario that requires cNTLM to be deployed is that of a Company that has a proxy and requires all users to authenticate each request with their own credentials. In such a scenario, unless the credentials are indeed exposed, the operating system cannot access the Internet, that is, it cannot pull anything from the repositories. In other words, unless APT is given username and plain text password, it will not be able to pull and install anything. Not even cNTLM!

Most of the cNTLM images present in the Docker Hub do indeed install cNTLM through APT. This means one of the following cases apply:

APT is given plain text credentials.
Building the image fails, since cNTLM can't be pulled and installed.

To cope with this, jaschac/cntlm:

Is built on top of jaschac/debian-gcc, which is the official Debian Jessie image with the addition of GNU's gcc and make. Nothing else.
Comes with the official cNTLM 0.92.3 source code, which is first copied into the image then built.

This means that through the jaschac/cntlm image, cNTLM can be installed without need to access the Internet.

Setup

There are two ways to get and use the jaschac/cntlm image:

Pulling from the Docker Hub

The jaschac/cntlm image can be easily pulled from the Docker Hub:

$ sudo docker pull jaschac/cntlm

Building the Image from the Source

jaschac/cntlm's source code can be freely pulled from GitHub and used to build an image.

$ git clone git@github.com:jaschac/docker-cntlm.git cntlm

Once pulled, the image will have the following structure:

cntlm/
├── [ 268]  Dockerfile
├── [4.0K]  files
│   ├── [4.0K]  cntlm-0.92.3
│   │   ├── [2.9K]  acl.c
│   │   ├── [1.1K]  acl.h
│   │   ├── [3.1K]  auth.c
│   │   ├── [2.0K]  auth.h
│   │   ├── [4.0K]  config
│   │   │   ├── [ 253]  endian.c
│   │   │   ├── [ 205]  gethostname.c
│   │   │   ├── [ 100]  socklen_t.c
│   │   │   └── [ 100]  strdup.c
│   │   ├── [3.5K]  config.c
│   │   ├── [1.5K]  config.h
│   │   ├── [1.7K]  configure
│   │   ├── [ 902]  COPYRIGHT
│   │   ├── [4.0K]  debian
│   │   │   ├── [ 163]  changelog
│   │   │   ├── [  74]  cntlm.default
│   │   │   ├── [2.1K]  cntlm.init
│   │   │   ├── [   2]  compat
│   │   │   ├── [ 802]  control
│   │   │   ├── [1.2K]  copyright
│   │   │   ├── [  37]  dirs
│   │   │   ├── [   7]  docs
│   │   │   ├── [ 123]  lintian-override
│   │   │   ├── [ 624]  postinst
│   │   │   ├── [ 610]  postrm
│   │   │   ├── [ 278]  prerm
│   │   │   ├── [1.7K]  rules
│   │   │   └── [  55]  watch
│   │   ├── [ 11K]  direct.c
│   │   ├── [ 999]  direct.h
│   │   ├── [4.0K]  doc
│   │   │   ├── [ 26K]  cntlm.1
│   │   │   ├── [2.8K]  cntlm.conf
│   │   │   └── [2.8K]  valgrind.txt
│   │   ├── [ 27K]  forward.c
│   │   ├── [1.2K]  forward.h
│   │   ├── [1.7K]  globals.h
│   │   ├── [ 14K]  http.c
│   │   ├── [1.8K]  http.h
│   │   ├── [ 18K]  LICENSE
│   │   ├── [ 39K]  main.c
│   │   ├── [4.7K]  Makefile
│   │   ├── [1.6K]  Makefile.xlc
│   │   ├── [ 11K]  ntlm.c
│   │   ├── [1.3K]  ntlm.h
│   │   ├── [2.5K]  pages.c
│   │   ├── [1.0K]  pages.h
│   │   ├── [5.1K]  README
│   │   ├── [4.0K]  rpm
│   │   │   ├── [8.0K]  cntlm.init
│   │   │   ├── [4.1K]  cntlm.spec
│   │   │   ├── [1022]  cntlm.sysconfig
│   │   │   └── [1.0K]  rules
│   │   ├── [7.8K]  scanner.c
│   │   ├── [1.1K]  scanner.h
│   │   ├── [6.3K]  socket.c
│   │   ├── [1.3K]  socket.h
│   │   ├── [2.2K]  swap.h
│   │   ├── [ 18K]  utils.c
│   │   ├── [4.7K]  utils.h
│   │   ├── [   7]  VERSION
│   │   ├── [4.0K]  win
│   │   │   ├── [  46]  Cntlm Homepage.url
│   │   │   ├── [7.0K]  cntlm.ico
│   │   │   ├── [ 672]  README.txt
│   │   │   ├── [  23]  resources.rc
│   │   │   ├── [2.3K]  setup.iss.in
│   │   │   ├── [  70]  Software Updates.url
│   │   │   └── [  73]  Support Website.url
│   │   ├── [ 43K]  xcrypt.c
│   │   └── [4.0K]  xcrypt.h
│   └── [4.0K]  etc
│       └── [2.4K]  cntlm.conf
├── [ 31K]  LICENSE
├── [ 481]  metadata.json
├── [  15]  README
├── [ 11K]  README.md
└── [4.0K]  scripts
    └── [1.5K]  init_container.sh

The jascha/cntlm image then can be built with the following command:

$ sudo docker build -t jaschac/cntlm -f cntlm/Dockerfile cntlm/
Successfully built f730765d27c7
$ sudo docker images
REPOSITORY                TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
jaschac/cntlm             latest              f730765d27c7        22 seconds ago      226.7 MB

Usage

The jaschac/cntlm is meant to be run as a container which all other containers that need to access the Internet will link to. Starting such a container is fair simple but does require some parameters to be provided through environment variables.

The following parameters are mandatory:

CNTLM_DOMAIN
CNTLM_PROXY_URL
CNTLM_USERNAME

At least one of the following parameters is mandatory. Please make sure you check which one is expected by your proxy. Providing all of them does not hurt.

CNTLM_PASSLM
CNTLM_PASSNT
CNTLM_PASSNTLMv2

Note that in this case we are not passing the plain text password of the user, but its hash, which can be generated with the following command:

$ sudo cntlm -H

The following parameters are optional. If not provided, they will be assigned default values:

CNTLM_PROXY_PORT: it defaults to 3128

sudo docker run --name cntlm -e CNTLM_USERNAME=jascha -e CNTLM_DOMAIN=lostinmalloc -e CNTLM_PROXY_URL=proxy.lostinmalloc.com -e CNTLM_PROXY_PORT=3128 -e CNTLM_PASSNTLMv2=62229EA8B6C0EEC4D887AD048960CC01 -d jaschac/cntlm

Upon launch, the container executes a Bash script that does the following:

Validates the args passed.
Builds and installs cNTLM from the source.
Injects into the cNTLM configuration file the data passed by the user.
Starts cNTLM in foreground, exposing port 3128.

$ sudo docker ps
CONTAINER ID    	IMAGE           		COMMAND            		CREATED         	STATUS          	PORTS           	NAMES
db596aa1279d    	jaschac/cntlm:latest    "/bin/sh -c init_con   	6 minutes ago   	Up 6 minutes    	3128/tcp        	cntlm

How to use it through containers

The best way to test jaschac/cntlm is to fire up a brand new container and access the Internet through the proxy by linking it to jaschac/cntlm. Let's create an ad hoc image that incapsulates this information into APT:

debian-test/
├── Dockerfile
├── etc
│   └── apt
│       └── apt.conf
├── metadata.json
└── README.md

The apt.conf file looks like this:

Acquire::http::Proxy "http://cntlm:3128";

The Dockerfile is as simple as:

FROM debian:jessie
MAINTAINER Jascha Casadio <jascha@lostinmalloc.com>
ADD etc/apt/apt.conf /etc/apt/apt.conf
RUN apt-get update -qq
RUN apt-get install -y -qq python-pip

With this image, we can fire up a container:

$ sudo docker run --rm=true --link cntlm:cntlm -it debian-test /bin/bash

The very important thing about this is the link. Inside the container that we have just fired up we will not have an entry, in /etc/hosts, that allows us to refer to it through 'cntlm'. Once inside the container, we can:

Access APT:

	root@7479e4ba7c3f:/# apt-get update
	Ign http://ftp.es.debian.org jessie InRelease
	Get:1 http://ftp.es.debian.org jessie-updates InRelease [135 kB]
	...
	Fetched 20.0 MB in 4s (4639 kB/s)                   	 
	Reading package lists... Done

Access the Internet through other services, as long as we use the link to cntlm:

	$ sudo pip install django
	Downloading/unpacking django
	  Cannot fetch index base URL http://pypi.python.org/simple/
	  Could not find any downloads that satisfy the requirement django
	No distributions at all found for django

	$ sudo pip --proxy cntlm:3128 install django
	Downloading/unpacking django
	...
	Successfully installed django
	Cleaning up...

Of course, we can export the following environment variables to our images, so that cntm is available to the containers without worries:

ftp_proxy=cntlm:3128
http_proxy=cntlm:3128
https_proxy=cntlm:3128

Docker Compose

The jaschac/cntlm can be easily used as part of a multi-container application through Docker Compose. This is how it can be configured to serve access through the proxy to another container:

cntlm:
  image: jaschac/cntlm
  environment:
    - CNTLM_USERNAME=jascha
    - CNTLM_DOMAIN=lostinmalloc
    - CNTLM_PROXY_URL=proxy.lostinmalloc.com
    - CNTLM_PROXY_PORT=3128
    - CNTLM_PASSNTLMv2=62229EA8B6C0EEC4D887AD048960CC01
whatever:
  image: whatever
  links:
    - cntlm:cntlm
  ...

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

jaschac/cntlm

Table of Contents

Overview

Image Description

How does jaschac/cntlm differ from other cNTLM images

Setup

Pulling from the Docker Hub

Building the Image from the Source

Usage

How to use it through containers

Docker Compose

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 2 Commits
files		files
scripts		scripts
Dockerfile		Dockerfile
LICENSE		LICENSE
README		README
README.md		README.md
metadata.json		metadata.json

License

jaschac/docker-cntlm

Folders and files

Latest commit

History

Repository files navigation

jaschac/cntlm

Table of Contents

Overview

Image Description

How does jaschac/cntlm differ from other cNTLM images

Setup

Pulling from the Docker Hub

Building the Image from the Source

Usage

How to use it through containers

Docker Compose

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages