GitHub - jbglaw/obi-steckdose

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 71 Commits
Esp8266-Arduino-Makefile @ 1e5cbb5		Esp8266-Arduino-Makefile @ 1e5cbb5
libraries		libraries
.gitignore		.gitignore
.gitmodules		.gitmodules
Makefile		Makefile
README.txt		README.txt
obi-button.cpp		obi-button.cpp
obi-button.h		obi-button.h
obi-common.h		obi-common.h
obi-config.cpp		obi-config.cpp
obi-config.h		obi-config.h
obi-extra-pins.cpp		obi-extra-pins.cpp
obi-extra-pins.h		obi-extra-pins.h
obi-http.cpp		obi-http.cpp
obi-http.h		obi-http.h
obi-misc.cpp		obi-misc.cpp
obi-misc.h		obi-misc.h
obi-mqtt.cpp		obi-mqtt.cpp
obi-mqtt.h		obi-mqtt.h
obi-status-led.cpp		obi-status-led.cpp
obi-status-led.h		obi-status-led.h
obi-steckdose.ino		obi-steckdose.ino
obi-telnet.cpp		obi-telnet.cpp
obi-telnet.h		obi-telnet.h

Repository files navigation

 Hardware
~~~~~~~~~~
ESP8266 with 1 MB (?) Flash
Tri-Wing: Gr. 1x89, Wera 875/4
PCB: PH1x89, Wera 851/4

 Building
~~~~~~~~~~
# Once:
git submodule init
git submodule update
( cd Esp8266-Arduino-Makefile && bash ./esp8266-install.sh )

# Always:
make
make upload	# Serial port in Makefile

You can also use OTA updates after the firmware has been installed
for the first time.

 LED Blinking
~~~~~~~~~~~~~~
Config Mode (as AP): 500/500	(192.168.4.1)
OTA Flashing: solid on
Connecting in STA mode: 100/100
Running (in STA mode): 150/850 / 10/990 (depends on Relay on/off)

 Missing stuff
~~~~~~~~~~~~~~~
[x] MQTT (server:port config, endpoint implementation)
[x] network<->serial proxy
[ ] Telnet serial extensions (work in progress)
[x] Telnet <-> syslog
[x] OTA: https://tttapa.github.io/ESP8266/Chap13%20-%20OTA.html (tested)
[x] Proper flash config checking (tested)
[x] mDNS (tested: ping ${MQTT/mDNS Name}.local.)
[x] Syslog (tested)