v3.2.0.2

This is a maintenance release, updating skarnet.org packages to their latest versions. Only minor bugfixes.
As always, upgrading is recommended, to take advantage of the bugfixes; but there is no urgency if you haven't noticed anything wrong.
(v3.2.0.1 had a minor cosmetic bug where the s6-dns version didn't appear properly, which is why this release is tagged v3.2.0.2.)

Binary releases include the following packages:

Software	Version
BearSSL	3c040368f6791553610e362401db1efff4b4c5b8
skalibs	v2.14.3.0
execline	v2.9.6.1
s6	v2.13.1.0
s6-rc	v0.5.5.0
s6-linux-init	v1.1.2.1
s6-portable-utils	v2.3.0.4
s6-linux-utils	v2.6.2.1
s6-dns	v2.4.0.0
s6-networking	v2.7.0.4
s6-overlay-helpers	v0.1.1.0

v3.2.0.1

Binary releases include the following packages:

Software	Version
BearSSL	3c040368f6791553610e362401db1efff4b4c5b8
skalibs	v2.14.3.0
execline	v2.9.6.1
s6	v2.13.1.0
s6-rc	v0.5.5.0
s6-linux-init	v1.1.2.1
s6-portable-utils	v2.3.0.4
s6-linux-utils	v2.6.2.1
s6-dns
s6-networking	v2.7.0.4
s6-overlay-helpers	v0.1.1.0

v3.2.0.0

This version of s6-overlay uses the latest skarnet.org packages.

It also removes the default service startup timeout, which was causing more problems than it was solving. (Now if you need to make your container fail when it hangs, you need to manually specify a timeout in the S6_CMD_WAIT_FOR_SERVICES_MAXTIME variable.

More unprivileged environments are supported, e.g. containers spawned by Kubernetes.

Binary releases include the following packages:

Software	Version
BearSSL	79c060eea3eea1257797f15ea1608a9a9923aa6f
skalibs	v2.14.2.0
execline	v2.9.6.0
s6	v2.13.0.0
s6-rc	v0.5.4.3
s6-linux-init	v1.1.2.0
s6-portable-utils	v2.3.0.3
s6-linux-utils	v2.6.2.0
s6-dns	v2.3.7.2
s6-networking	v2.7.0.3
s6-overlay-helpers	v0.1.1.0

v3.1.6.2

This release fixes a bug introduced in v3.1.6.1 (sorry!) that caused containers to hang on shutdown. No other changes.

Binary releases include the following packages:

Software	Version
BearSSL	79c060eea3eea1257797f15ea1608a9a9923aa6f
skalibs	v2.14.0.1
execline	v2.9.4.0
s6	v2.12.0.2
s6-rc	v0.5.4.2
s6-linux-init	v1.1.2.0
s6-portable-utils	v2.3.0.3
s6-linux-utils	v2.6.2.0
s6-dns	v2.3.7.0
s6-networking	v2.7.0.0
s6-overlay-helpers	v0.1.0.2

v3.1.6.1

This is a bugfix release, updating to the latest versions of the skarnet.org packages. It fixes a bug where services declared in /etc/services.d were not properly killed during the regular shutdown procedure and were only caught by the final timeout.

Binary releases include the following packages:

Software	Version
BearSSL	79c060eea3eea1257797f15ea1608a9a9923aa6f
skalibs	v2.14.0.1
execline	v2.9.4.0
s6	v2.12.0.1
s6-rc	v0.5.4.2
s6-linux-init	v1.1.2.0
s6-portable-utils	v2.3.0.3
s6-linux-utils	v2.6.2.0
s6-dns	v2.3.7.0
s6-networking	v2.7.0.0
s6-overlay-helpers	v0.1.0.2

v3.1.6.0

This long-awaited release should fix all the pending bugs. It uses the latest version of the skarnet.org software stack, which has several performance improvements.

Binary releases include the following packages:

Software	Version
BearSSL	79c060eea3eea1257797f15ea1608a9a9923aa6f
skalibs	v2.14.0.0
execline	v2.9.4.0
s6	v2.12.0.0
s6-rc	v0.5.4.2
s6-linux-init	v1.1.2.0
s6-portable-utils	v2.3.0.3
s6-linux-utils	v2.6.2.0
s6-dns	v2.3.6.0
s6-networking	v2.6.0.0
s6-overlay-helpers	v0.1.0.2

v3.1.5.0

This release fixes a bug with interactive terminal management in CMD. It also introduces the S6_CMD_USE_TERMINAL variable, that you can set to nonzero when your CMD needs an interactive terminal and you have activated S6_LOGGING. That will allow your CMD to actually make use of the terminal, at the expense of not having its output logged. (Unfortunately, having both at the same time is nigh impossible.)

The binaries are built with the latest gcc-13.1 and musl-1.2.4. Please report any regression you find.

Binary releases include the following packages:

Software	Version
BearSSL	46f7dddce75227f2e40ab94d66ceb9f19ee6b1b0
skalibs	v2.13.1.1
execline	v2.9.3.0
s6	v2.11.3.2
s6-rc	v0.5.4.1
s6-linux-init	v1.1.1.1
s6-portable-utils	v2.3.0.2
s6-linux-utils	v2.6.1.2
s6-dns	v2.3.5.5
s6-networking	v2.5.1.3
s6-overlay-helpers	v0.1.0.1

v3.1.4.2

This is a bugfix release, updating the skaware packages to their latest versions, which fix a couple user-visible bugs. It's unlikely you have been impacted, so there's no urgency; you should upgrade at your convenience.

Binary releases include the following packages:

Software	Version
BearSSL	46f7dddce75227f2e40ab94d66ceb9f19ee6b1b0
skalibs	v2.13.1.1
execline	v2.9.3.0
s6	v2.11.3.2
s6-rc	v0.5.4.1
s6-linux-init	v1.1.1.0
s6-portable-utils	v2.3.0.2
s6-linux-utils	v2.6.1.2
s6-dns	v2.3.5.5
s6-networking	v2.5.1.3
s6-overlay-helpers	v0.1.0.1

v3.1.4.1

A bugfix release, using the newer versions of skarnet.org packages.
s6-overlay normally never hits the bugs, so upgrading from 3.1.4.0 should be low priority for users.

Binary releases include the following packages:

Software	Version
BearSSL	46f7dddce75227f2e40ab94d66ceb9f19ee6b1b0
skalibs	v2.13.1.0
execline	v2.9.2.1
s6	v2.11.3.0
s6-rc	v0.5.4.1
s6-linux-init	v1.1.0.0
s6-portable-utils	v2.3.0.1
s6-linux-utils	v2.6.1.1
s6-dns	v2.3.5.5
s6-networking	v2.5.1.3
s6-overlay-helpers	v0.1.0.1

v3.1.4.0

This release uses the latest versions of skarnet.org packages, including multicall configuration for the packages that support it, yielding smaller disk footprints. It comes with a batch of small bugfixes, as well as support for the powerpc64 (big-endian) and powerpc64le (little-endian) architectures.

Binary releases include the following packages:

Software	Version
BearSSL	46f7dddce75227f2e40ab94d66ceb9f19ee6b1b0
skalibs	v2.13.1.0
execline	v2.9.2.0
s6	v2.11.3.0
s6-rc	v0.5.4.0
s6-linux-init	v1.1.0.0
s6-portable-utils	v2.3.0.0
s6-linux-utils	v2.6.1.0
s6-dns	v2.3.5.5
s6-networking	v2.5.1.3
s6-overlay-helpers	v0.1.0.1