v1.0.3 to add PWM_StepperControl example

### Releases v1.0.3

1. Add example [PWM_StepperControl](https://github.com/khoih-prog/nRF52_MBED_PWM/tree/main/examples/PWM_StepperControl) to demo how to control Stepper Motor using PWM

README.md

@@ -32,7 +32,8 @@
 * [Examples](#examples)
   * [ 1. PWM_Multi](examples/PWM_Multi)
   * [ 2. PWM_Single](examples/PWM_Single)
-  * [ 3. multiFileProject](examples/multiFileProject). **New**
+  * [ 3. multiFileProject](examples/multiFileProject)
+  * [ 4. PWM_StepperControl](examples/PWM_StepperControl) **New**
 * [Example PWM_Multi](#example-PWM_Multi)
 * [Debug Terminal Output Samples](#debug-terminal-output-samples)
   * [1. PWM_Single on Nano_33_BLE](#1-PWM_Single-on-Nano_33_BLE)
@@ -101,7 +102,7 @@ This non-being-blocked important feature is absolutely necessary for mission-cri
 
 1. [`Arduino IDE 1.8.19+` for Arduino](https://github.com/arduino/Arduino). [![GitHub release](https://img.shields.io/github/release/arduino/Arduino.svg)](https://github.com/arduino/Arduino/releases/latest)
 2. [`Arduino mbed_nano core 3.4.1+`](https://github.com/arduino/ArduinoCore-mbed) for Arduino (Use Arduino Board Manager) MBED nRF52840-based boards such as **Nano_33_BLE, Nano_33_BLE_Sense**. [![GitHub release](https://img.shields.io/github/release/arduino/ArduinoCore-mbed.svg)](https://github.com/arduino/ArduinoCore-mbed/releases/latest)
-3. `Seeeduino mbed core 2.7.2+` for Seeeduino nRF52840-based boards such as **SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE**
+3. [`Seeeduino mbed core 2.9.0+`](https://github.com/Seeed-Studio/ArduinoCore-mbed) for Seeed nRF52840-based boards such as **SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE**. [![GitHub release](https://img.shields.io/github/release/Seeed-Studio/ArduinoCore-mbed.svg)](https://github.com/Seeed-Studio/ArduinoCore-mbed/releases/latest)
 
 ---
 ---
@@ -238,7 +239,8 @@ if (pwm)
 
  1. [PWM_Multi](examples/PWM_Multi)
  2. [PWM_Single](examples/PWM_Single)
- 3. [**multiFileProject**](examples/multiFileProject) **New**
+ 3. [multiFileProject](examples/multiFileProject)
+ 4. [**PWM_StepperControl**](examples/PWM_StepperControl) **New**
 
 
 ---
@@ -261,7 +263,7 @@ The following is the sample terminal output when running example [PWM_Single](ex
 
 ```cpp
 Starting PWM_Single on Nano_33_BLE
-nRF52_MBED_PWM v1.0.2
+nRF52_MBED_PWM v1.0.3
 [PWM] Freq = 5000.00, DutyCycle % = 50.00, DutyCycle = 0.50, Pin = 2
 
 ============================================
@@ -293,7 +295,7 @@ The following is the sample terminal output when running example [**PWM_Multi**]
 
 ```cpp
 Starting PWM_Multi on Nano_33_BLE
-nRF52_MBED_PWM v1.0.2
+nRF52_MBED_PWM v1.0.3
 [PWM] Freq = 1000.00, 	DutyCycle % = 50.00, 	DutyCycle = 0.50, 	Pin = 2
 [PWM] Freq = 2500.00, 	DutyCycle % = 50.00, 	DutyCycle = 0.50, 	Pin = 3
 [PWM] Freq = 4000.00, 	DutyCycle % = 50.00, 	DutyCycle = 0.50, 	Pin = 4
@@ -366,14 +368,16 @@ Submit issues to: [nRF52_MBED_PWM issues](https://github.com/khoih-prog/nRF52_MB
 
 ## DONE
 
-1. Basic hardware multi-channel PWM for **Nano_33_BLE**.
-2. Add Table of Contents
-3. Permit to start, stop, modify, restore PWM settings on-the-fly
-4. Optimize library code by using `reference-passing` instead of `value-passing`
-5. Use `h-only` style
-6. Add functions to read PWM parameters.
-7. Add support to Seeeduino nRF52840-based boards such as **SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE**, etc. using Seeeduino `mbed` core
-8. Add astyle using `allman` style. Restyle the library
+ 1. Basic hardware multi-channel PWM for **Nano_33_BLE**.
+ 2. Add Table of Contents
+ 3. Permit to start, stop, modify, restore PWM settings on-the-fly
+ 4. Optimize library code by using `reference-passing` instead of `value-passing`
+ 5. Use `h-only` style
+ 6. Add functions to read PWM parameters.
+ 7. Add support to Seeeduino nRF52840-based boards such as **SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE**, etc. using Seeeduino `mbed` core
+ 8. Add astyle using `allman` style. Restyle the library
+ 9. Add example [PWM_StepperControl](https://github.com/khoih-prog/nRF52_MBED_PWM/tree/main/examples/PWM_StepperControl) to demo how to control Stepper Motor using PWM
+
 
 ---
 ---
@@ -382,6 +386,15 @@ Submit issues to: [nRF52_MBED_PWM issues](https://github.com/khoih-prog/nRF52_MB
 
 Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library.
 
+1. Thanks to [Paul van Dinther](https://github.com/dinther) for proposing new way to use PWM to drive Stepper-Motor in [Using PWM to step a stepper driver #16](https://github.com/khoih-prog/RP2040_PWM/issues/16), leading to v2.0.3
+
+
+<table>
+  <tr>
+    <td align="center"><a href="https://github.com/dinther"><img src="https://github.com/dinther.png" width="100px;" alt="dinther"/><br /><sub><b>Paul van Dinther</b></sub></a><br /></td>
+  </tr>
+</table>
+
 ---
 
 ## Contributing

changelog.md

@@ -11,12 +11,14 @@
 <a href="https://www.buymeacoffee.com/khoihprog6" title="Donate to my libraries using BuyMeACoffee"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Donate to my libraries using BuyMeACoffee" style="height: 50px !important;width: 181px !important;" ></a>
 <a href="https://www.buymeacoffee.com/khoihprog6" title="Donate to my libraries using BuyMeACoffee"><img src="https://img.shields.io/badge/buy%20me%20a%20coffee-donate-orange.svg?logo=buy-me-a-coffee&logoColor=FFDD00" style="height: 20px !important;width: 200px !important;" ></a>
 
+
 ---
 ---
 
 ## Table of Contents
 
 * [Changelog](#changelog)
+  * [Releases v1.0.3](#Releases-v103)
   * [Releases v1.0.2](#Releases-v102)
   * [Releases v1.0.1](#Releases-v101)
   * [Initial Releases v1.0.0](#Initial-Releases-v100)
@@ -26,6 +28,10 @@
 
 ## Changelog
 
+### Releases v1.0.3
+
+1. Add example [PWM_StepperControl](https://github.com/khoih-prog/nRF52_MBED_PWM/tree/main/examples/PWM_StepperControl) to demo how to control Stepper Motor using PWM. Check [Using PWM to step a stepper driver #16](https://github.com/khoih-prog/RP2040_PWM/issues/16)
+
 ### Releases v1.0.2
 
 1. Add support to Seeeduino nRF52840-based boards such as **SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE**, etc. using Seeeduino `mbed` core

examples/PWM_StepperControl/PWM_StepperControl.ino

@@ -0,0 +1,76 @@
+/****************************************************************************************************************************
+  PWM_StepperControl.ino
+  For Nano_33_BLE or Nano_33_BLE_Sense boards
+  Written by Khoi Hoang
+
+  Built by Khoi Hoang https://github.com/khoih-prog/nRF52_MBED_PWM
+  Licensed under MIT license
+
+  Credits of Paul van Dinther (https://github.com/dinther). Check https://github.com/khoih-prog/RP2040_PWM/issues/16
+*****************************************************************************************************************************/
+
+// Use with Stepper-Motor driver, such as TMC2209
+
+#if !( ARDUINO_ARCH_NRF52840 && TARGET_NAME == ARDUINO_NANO33BLE )
+  #error This code is designed to run on nRF52-based Nano-33-BLE boards using mbed-RTOS platform! Please check your Tools->Board setting.
+#endif
+
+#define _PWM_LOGLEVEL_       1
+
+// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
+#include "nRF52_MBED_PWM.h"
+
+// All the digital pins on Arduino Nano 33 BLE sense are PWM-enabled pins which are numbered from D0 to D13
+
+#define STEP_PIN      D2
+#define DIR_PIN       D9
+
+mbed::PwmOut* stepper   = nullptr;
+
+void setSpeed(int speed)
+{
+  if (speed == 0)
+  {
+    // Use DC = 0 to stop stepper
+    setPWM(stepper, STEP_PIN, 500, 0);
+  }
+  else
+  {
+    //  Set the frequency of the PWM output and a duty cycle of 50%
+    digitalWrite(DIR_PIN, (speed < 0));
+    setPWM(stepper, STEP_PIN, abs(speed), 50);
+  }
+}
+
+void setup() 
+{
+  pinMode(DIR_PIN, OUTPUT);
+
+  Serial.begin(115200);
+
+  while (!Serial && millis() < 5000);
+
+  delay(100);
+
+  Serial.print(F("\nStarting PWM_StepperControl on "));
+  Serial.println(BOARD_NAME);
+  Serial.println(nRF52_MBED_PWM_VERSION);
+}
+
+void loop() 
+{
+  setSpeed(1000);
+  delay(3000);
+
+  // Stop before reversing
+  setSpeed(0);
+  delay(3000);
+
+  // Reversing
+  setSpeed(-500);
+  delay(3000);
+
+  // Stop before reversing
+  setSpeed(0);
+  delay(3000);
+}

library.json

@@ -1,6 +1,6 @@
 {
   "name": "nRF52_MBED_PWM",
-  "version": "1.0.2",
+  "version": "1.0.3",
   "keywords": "timing, device, control, timer, pwm, interrupt, isr, isr-based, hardware-timer, mission-critical, accuracy, non-blocking, mbed, mbed-nano, nrf52840, nano-33-ble, nano-33-ble-sense, precise, hardware",
   "description": "This library enables you to use Hardware-based PWM to create and output PWM to pins on an nRF52840-based Nano_33_BLE board. These PWM channels, using nRF52840 Hardware PWM, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software ir ISR-based PWM, using millis(), micros() or Timer Interrupt. This important feature is absolutely necessary for mission-critical tasks. You can start, stop, change and restore the settings of any PWM channel on-the-fly.",
   "authors":

library.properties

@@ -1,5 +1,5 @@
 name=nRF52_MBED_PWM
-version=1.0.2
+version=1.0.3
 author=Khoi Hoang <khoih.prog@gmail.com>
 maintainer=Khoi Hoang <khoih.prog@gmail.com>
 sentence=This library enables you to use Hardware-based PWM to create and output PWM to pins on an nRF52840-based Nano_33_BLE board.

src/PWM_Generic_Debug.h

@@ -6,13 +6,14 @@
   Built by Khoi Hoang https://github.com/khoih-prog/nRF52_MBED_PWM
   Licensed under MIT license
 
-  Version: 1.0.2
+  Version: 1.0.3
 
   Version Modified By   Date      Comments
   ------- -----------  ---------- -----------
   1.0.0   K.Hoang      09/02/2022 Initial coding for Nano_33_BLE /  Nano_33_BLE_Sense using ArduinoCore-mbed mbed_nano core
   1.0.1   K.Hoang      09/02/2022 Add functions to read PWM parameters
   1.0.2   K.Hoang      26/10/2022 Add support to SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE using mbed
+  1.0.3   K Hoang      22/01/2023 Add `PWM_StepperControl` example
  *****************************************************************************************************************************/
 
 #pragma once

src/nRF52_MBED_PWM.h

@@ -6,13 +6,14 @@
   Built by Khoi Hoang https://github.com/khoih-prog/nRF52_MBED_PWM
   Licensed under MIT license
 
-  Version: 1.0.2
+  Version: 1.0.3
 
   Version Modified By   Date      Comments
   ------- -----------  ---------- -----------
   1.0.0   K.Hoang      09/02/2022 Initial coding for Nano_33_BLE /  Nano_33_BLE_Sense using ArduinoCore-mbed mbed_nano core
   1.0.1   K.Hoang      09/02/2022 Add functions to read PWM parameters
   1.0.2   K.Hoang      26/10/2022 Add support to SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE using mbed
+  1.0.3   K Hoang      22/01/2023 Add `PWM_StepperControl` example
 *****************************************************************************************************************************/
 
 #pragma once

src/nRF52_MBED_PWM.hpp

@@ -6,13 +6,14 @@
   Built by Khoi Hoang https://github.com/khoih-prog/nRF52_MBED_PWM
   Licensed under MIT license
 
-  Version: 1.0.2
+  Version: 1.0.3
 
   Version Modified By   Date      Comments
   ------- -----------  ---------- -----------
   1.0.0   K.Hoang      09/02/2022 Initial coding for Nano_33_BLE /  Nano_33_BLE_Sense using ArduinoCore-mbed mbed_nano core
   1.0.1   K.Hoang      09/02/2022 Add functions to read PWM parameters
   1.0.2   K.Hoang      26/10/2022 Add support to SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE using mbed
+  1.0.3   K Hoang      22/01/2023 Add `PWM_StepperControl` example
 *****************************************************************************************************************************/
 
 #pragma once
@@ -25,13 +26,13 @@
 #endif
 
 #ifndef nRF52_MBED_PWM_VERSION
-  #define nRF52_MBED_PWM_VERSION             "nRF52_MBED_PWM v1.0.2"
+  #define nRF52_MBED_PWM_VERSION             "nRF52_MBED_PWM v1.0.3"
 
   #define nRF52_MBED_PWM_VERSION_MAJOR       1
   #define nRF52_MBED_PWM_VERSION_MINOR       0
-  #define nRF52_MBED_PWM_VERSION_PATCH       2
+  #define nRF52_MBED_PWM_VERSION_PATCH       3
 
-  #define nRF52_MBED_PWM_VERSION_INT         1000002
+  #define nRF52_MBED_PWM_VERSION_INT         1000003
 #endif
 
 

src/nRF52_MBED_PWM_Impl.h

@@ -6,13 +6,14 @@
   Built by Khoi Hoang https://github.com/khoih-prog/nRF52_MBED_PWM
   Licensed under MIT license
 
-  Version: 1.0.2
+  Version: 1.0.3
 
   Version Modified By   Date      Comments
   ------- -----------  ---------- -----------
   1.0.0   K.Hoang      09/02/2022 Initial coding for Nano_33_BLE /  Nano_33_BLE_Sense using ArduinoCore-mbed mbed_nano core
   1.0.1   K.Hoang      09/02/2022 Add functions to read PWM parameters
   1.0.2   K.Hoang      26/10/2022 Add support to SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE using mbed
+  1.0.3   K Hoang      22/01/2023 Add `PWM_StepperControl` example
 *****************************************************************************************************************************/
 
 #ifndef nRF52_MBED_PWM_IMPL_H