node-bmw-client

Do magic with an E38/E39/E46/E53-ish BMW, Raspberry Pi 3, and Node.js 9.x.

Advisory

I dev way faster than I document.
This README is 12+ months out of date and needs to be completely rewritten, to include things like:

• NBT retrofit support (HW 07)
  • Currently power on/off and steering wheel controls are working, very early WIP
• iDrive controller to Kodi support
  • Supports K-CAN and K-CAN2 iDrive controllers
  • E38/E39/E53 MFL > NBT support
• tvservice/vcgencmd HDMI screen control or HDMI-CEC screen control
• Custom afterrun timer for accessory relays via Pi GPIO
• SO MUCH OTHER STUFF
• For snippets, check out my Instagram
  I'll get to it... eventually

Disclaimers

• First and foremost, this project can and might hurt you.
  • If you rely on the auto lights, and they cut out at night, you might die.
  • If you are trapped in the vehicle, and the app locks up the GM and the door locks don't work, you might die.
  • If you drive into a body of water and need to roll down the window to release the pressure, and the app locks up the GM and the windows don't work, you might die.
  • If the app develops some bug/level of sentience .. it's worth knowing that it can talk to/hear from the airbag computer. If they deploy randomly.. you guessed it, you might die.
• If it breaks/hurts/kills you/your car/your something else/etc... not my fault.
  • Harsh disclaimer but it is what it is.
  • See MIT license.
• I routinely break master. Like, 100% un-functional.
• I make no assertations that I am a professional. I'm just doing this for fun and to learn a little Node.js.
• It's probably best to use this project as a reference versus fork it.

Currently being developed using a US-spec 2000 E39 540i, a US-spec 2002 E39 M5, two Raspberry Pi 3s running Raspbian stretch, Rolf Resler IBUS/KBUS adapters, NBT HW 07, PiCAN2 dual-channel CANBUS hats, a HDMI screen, NodeJS 9.x, and more. About 90% of it is done in a way I don't really like, but I have so little time to work on this... =/

It acts as, more or less.. plug-in custom firmware for the BMW modules.

It does:

• BMW bus interface:
  • DBUS
  • IBUS
  • KBUS
• Module emulation:
  • CDC (trunk-mounted CD changer - useful to repurpose as aux input)
  • MID (Multi-information display)
  • BMBT (Bordmonitor/On-board monitor)
  • DSPC (DSP controller)
• Lights:
  • Standing lights auto on/off, essentially as DRLs
  • Low beam auto on/off, based on locale and sun position (latitude/longitude are set in config.json)
  • Rear fog LED in gauge cluster acts as auto-lights status light (since my car doesn't actually have a rear fog)
    • It only shows when fogs or low-beams are on =/
  • "Comfort" turn signal emulation, a la newer BMWs
    • 3-flash comfort turn is a joke, this does 5-flash
• Media:
  • HDMI CEC control to power on/off HDMI display on ignition change
  • Kodi API integration
    • Steering wheel controls work with Kodi
    • Key on/off starts/stops Kodi playback
    • Song titles scroll in IKE cluster
• Custom display in gauge cluster (IKE) with system load, coolant temp in deg C, and time (from OS, not from car)
• Welcome message in gauge cluster (IKE) on key on/app start
• WebUI:
  • Current vehicle status
    • Vehicle speed
    • Engine RPM
    • Engine status (running/not running)
    • Country coding/units (parsing is terrible, I do it all wrong, don't look..)
    • Coolant/exterior temperatures
    • VIN (last 7)
    • Odometer
    • Doors/hood/trunk opened/closed
    • Windows up/down
    • Central locking
    • Handbrake status
    • In reverse gear or not
    • Ignition position
    • OBC data:
      • Aux heat/vent timer 1+2
      • Average speed
      • Consumption 1+2
      • Date/time
      • Distance remaining
      • Range to empty
      • Speed limit
      • Stopwatch
      • Timer
  • Control vehicle modules:
    • DSP amp/equalizer
    • GM (windows/doors/locks)
    • IKE (gauge cluster)
    • LCM (light module)
    • OBC data set/reset
  • Control other things:
    • HDMI CEC on/off
      • GPIO outputs (for Sainsmart relays)
• Other:
  • Time/date sync from OS to car
  • Auto-unlock doors when key is turned from run to accessory
  • Parsing/decoding of IO status from LCM and GM
  • WebSocket UI/dynamic table for displaying decoded data in WebUI, with 2-way communication for sending data as well
  • What I'm about 97% certain is the single largest documented collection of BMW IBUS commands, under /ref
• .. and a lot of other stuff, I'm probably forgetting.

Future plans/ideas/to do list:

• My current todo list (Google Docs)

I'll add more to this once I'm out of the dirty-dev weeds, which might be never