Merge remote-tracking branch 'upstream/master' into develop

le4ker · Jan 26, 2025 · 86d8be7 · 86d8be7
2 parents c823826 + 5f711f0
commit 86d8be7
Show file tree

Hide file tree

Showing 17 changed files with 1,791 additions and 0 deletions.
diff --git a/docs/license_violations.md b/docs/license_violations.md
@@ -33,6 +33,7 @@ If you own a board from one of the following vendors already, consider asking th
 | mmd / Smartmmd / i-game.tech | Ambiguity on PRs -- marketing says wireless, PR author said wired-only, then included wireless code anyway. Seemingly intentionally deceptive.                                                                                                                                                                                      |
 | MyKeyClub                    | Community-supported JRIS75, vendor was contacted by community members and refused to cooperate.                                                                                                                                                                                                                                     |
 | owlab                        | Selling wired based on QMK without sources, just `via.json` provided. Ambiguous as to whether or not wireless firmware is based on QMK, given that their configuration tool looks very similar to VIA.                                                                                                                              |
+| pressplayid                  | Selling wired and tri-mode boards based on QMK without sources, just `via.json` provided                                                                                                                                                                                                                                            |
 | qwertykeys                   | Selling wired and tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                           |
 | Redragon                     | Selling tri-mode boards based on QMK without sources, attempted upstreaming crippled firmware without wireless.                                                                                                                                                                                                                     |
 | Royal Kludge                 | PRs for fake boards in order to attain VIA compatibility identified. Lots of other keyboards with `via.json` but no corresponding sources, attempted upstreaming crippled firmware without wireless. Wireless code for some provided, pending core cleanup for QMK upstreaming. PRs including different manufacturer names as well. |

diff --git a/keyboards/trnthsn/e8ghtyneo/config.h b/keyboards/trnthsn/e8ghtyneo/config.h
@@ -0,0 +1,23 @@
+/*
+Copyright 2025 Tyson.Keebs
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define WS2812_SPI_DRIVER SPID2
+#define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN B13
diff --git a/keyboards/trnthsn/e8ghtyneo/halconf.h b/keyboards/trnthsn/e8ghtyneo/halconf.h
@@ -0,0 +1,21 @@
+/* Copyright 2025 Tyson.Keebs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>
diff --git a/keyboards/trnthsn/e8ghtyneo/info.json b/keyboards/trnthsn/e8ghtyneo/info.json
diff --git a/keyboards/trnthsn/e8ghtyneo/keymaps/default/keymap.c b/keyboards/trnthsn/e8ghtyneo/keymaps/default/keymap.c
@@ -0,0 +1,39 @@
+// Copyright 2025 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐
+    // │Esc│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │Prs│Srk│Ps │
+    // └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘
+    // ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┐
+    // │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bsp│Bsp│ │Ins│Hm │PgU│
+    // ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┼───┼───┤
+    // │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │ │Del│End│PgD│
+    // ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ └───┴───┴───┘
+    // │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │Ent │
+    // ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤     ┌───┐
+    // │Sft │Sft│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │Shift │Fn │     │ ↑ │
+    // ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤ ┌───┼───┼───┐
+    // │Ctrl │Win│Alt  │                           │Alt  │Win│Ctrl │ │ ← │ ↓ │ → │
+    // └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ └───┴───┴───┘
+
+    [0] = LAYOUT_all(
+            KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                         KC_PSCR, KC_SCRL, KC_PAUS,
+            KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP,
+            KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,               KC_DEL,  KC_END,  KC_PGDN,
+            KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+            KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),                          KC_UP,
+            KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL,               KC_LEFT, KC_DOWN, KC_RGHT
+        ),
+
+    [1] = LAYOUT_all(
+            _______, _______, _______, _______, _______, UG_TOGG, _______, _______, _______, _______, UG_NEXT, UG_VALD, UG_VALU,                        _______, _______, _______, 
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, KC_VOLU,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,               KC_MPLY, KC_MNXT, KC_VOLD,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                        _______,
+            _______, _______, _______,                            _______,                                     _______, _______, _______,               _______, _______, _______
+        ),
+};
diff --git a/keyboards/trnthsn/e8ghtyneo/mcuconf.h b/keyboards/trnthsn/e8ghtyneo/mcuconf.h
@@ -0,0 +1,22 @@
+/* Copyright 2025 Tyson.Keebs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 TRUE
diff --git a/keyboards/trnthsn/e8ghtyneo/readme.md b/keyboards/trnthsn/e8ghtyneo/readme.md
@@ -0,0 +1,27 @@
+# E8ghtyNeo
+
+![E8ghtyNeo](https://imgur.com/YXYfqzZ.png)
+
+A TKL keyboard PCB compatible with Neo80. Supports Neo80 keyboard like an out-of-the-box PCB without any modification.
+
+* Keyboard Maintainer: [Trnthsn](https://github.com/trnthsn)
+* Hardware Supported: STM32, E8ghtyNeo, Neo80
+* Hardware Availability: [ThanhSon.Mech](https://www.facebook.com/ThanhSon.mech)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make trnthsn/e8ghtyneo/stm32f072:default
+
+Flashing example for this keyboard:
+
+    make trnthsn/e8ghtyneo/stm32f072:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/trnthsn/e8ghtyneo/stm32f072/keyboard.json b/keyboards/trnthsn/e8ghtyneo/stm32f072/keyboard.json
@@ -0,0 +1,4 @@
+{
+    "processor": "STM32F072",
+    "bootloader": "stm32-dfu",
+}
diff --git a/keyboards/trnthsn/e8ghtyneo/stm32f103/keyboard.json b/keyboards/trnthsn/e8ghtyneo/stm32f103/keyboard.json
@@ -0,0 +1,4 @@
+{
+    "processor": "STM32F103",
+    "bootloader": "uf2boot",
+}
diff --git a/keyboards/trojan_pinata/model_b/readme.md b/keyboards/trojan_pinata/model_b/readme.md
@@ -0,0 +1,32 @@
+# Model-B
+
+A 75% keyboard based on the RP2040.
+
+* Keyboard Maintainer: [Brian Hill](https://github.com/TrojanPinata)
+* Hardware Supported: [GitHub](https://github.com/TrojanPinata/Model-B)
+
+## Revisions
+
+At the current moment there is only one variant of the Model-B, the rev-0 (aka the prototype board). Any others are clones and may not have the exact firmware requirements.
+
+## Building and Flashing
+
+Make example for this keyboard (after setting up your build environment):
+
+    make trojan_pinata/model-b/rev0:default
+
+Flashing example for this keyboard:
+
+    make trojan_pinata/model-b/rev0:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
+* **Physical reset button**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Esc key.
+
+After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
diff --git a/keyboards/trojan_pinata/model_b/rev0/config.h b/keyboards/trojan_pinata/model_b/rev0/config.h
@@ -0,0 +1,14 @@
+// Copyright 2022 Stefan Kerkmann
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
+
+// settings for the oled keyboard demo with Adafruit 0.91" OLED display on the Stemma QT port
+#define I2C_DRIVER I2CD0
+#define I2C1_SDA_PIN GP0
+#define I2C1_SCL_PIN GP1
+
+#define OLED_TIMEOUT 3000000 // 5 minutes before oled turns off
diff --git a/keyboards/trojan_pinata/model_b/rev0/keyboard.json b/keyboards/trojan_pinata/model_b/rev0/keyboard.json
@@ -0,0 +1,122 @@
+{
+    "manufacturer": "Trojan_Pinata",
+    "keyboard_name": "Model-B",
+    "maintainer": "Trojan_Pinata",
+    "bootloader": "rp2040",
+    "diode_direction": "COL2ROW",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "GP27", "pin_b": "GP26"}
+        ]
+    },
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "oled": true,
+        "encoder": true
+    },
+    "matrix_pins": {
+        "cols": ["GP8", "GP9", "GP10", "GP11", "GP12", "GP13", "GP14", "GP15", "GP16", "GP17", "GP18", "GP19", "GP20", "GP21", "GP22"],
+        "rows": ["GP2", "GP3", "GP4", "GP5", "GP6", "GP7"]
+    },
+    "processor": "RP2040",
+    "url": "https://github.com/TrojanPinata/Model-B",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0xA500",
+        "vid": "0xE739"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 2], "x": 1.25, "y": 0},
+                {"matrix": [0, 3], "x": 2.25, "y": 0},
+                {"matrix": [0, 4], "x": 3.25, "y": 0},
+                {"matrix": [0, 5], "x": 4.25, "y": 0},
+                {"matrix": [0, 6], "x": 5.5, "y": 0},
+                {"matrix": [0, 7], "x": 6.5, "y": 0},
+                {"matrix": [0, 8], "x": 7.5, "y": 0},
+                {"matrix": [0, 9], "x": 8.5, "y": 0},
+                {"matrix": [0, 10], "x": 9.75, "y": 0},
+                {"matrix": [0, 11], "x": 10.75, "y": 0},
+                {"matrix": [0, 12], "x": 11.75, "y": 0},
+                {"matrix": [0, 13], "x": 12.75, "y": 0},
+                {"matrix": [0, 14], "x": 15.75, "y": 0},
+                {"matrix": [1, 0], "x": 0, "y": 1.5},
+                {"matrix": [1, 1], "x": 1, "y": 1.5},
+                {"matrix": [1, 2], "x": 2, "y": 1.5},
+                {"matrix": [1, 3], "x": 3, "y": 1.5},
+                {"matrix": [1, 4], "x": 4, "y": 1.5},
+                {"matrix": [1, 5], "x": 5, "y": 1.5},
+                {"matrix": [1, 6], "x": 6, "y": 1.5},
+                {"matrix": [1, 7], "x": 7, "y": 1.5},
+                {"matrix": [1, 8], "x": 8, "y": 1.5},
+                {"matrix": [1, 9], "x": 9, "y": 1.5},
+                {"matrix": [1, 10], "x": 10, "y": 1.5},
+                {"matrix": [1, 11], "x": 11, "y": 1.5},
+                {"matrix": [1, 12], "x": 12, "y": 1.5},
+                {"matrix": [1, 13], "x": 13, "y": 1.5, "w": 2},
+                {"matrix": [1, 14], "x": 15.25, "y": 1.5},
+                {"matrix": [2, 0], "x": 0, "y": 2.5, "w": 1.5},
+                {"matrix": [2, 1], "x": 1.5, "y": 2.5},
+                {"matrix": [2, 2], "x": 2.5, "y": 2.5},
+                {"matrix": [2, 3], "x": 3.5, "y": 2.5},
+                {"matrix": [2, 4], "x": 4.5, "y": 2.5},
+                {"matrix": [2, 5], "x": 5.5, "y": 2.5},
+                {"matrix": [2, 6], "x": 6.5, "y": 2.5},
+                {"matrix": [2, 7], "x": 7.5, "y": 2.5},
+                {"matrix": [2, 8], "x": 8.5, "y": 2.5},
+                {"matrix": [2, 9], "x": 9.5, "y": 2.5},
+                {"matrix": [2, 10], "x": 10.5, "y": 2.5},
+                {"matrix": [2, 11], "x": 11.5, "y": 2.5},
+                {"matrix": [2, 12], "x": 12.5, "y": 2.5},
+                {"matrix": [2, 13], "x": 13.5, "y": 2.5, "w": 1.5},
+                {"matrix": [2, 14], "x": 15.25, "y": 2.5},
+                {"matrix": [3, 0], "x": 0, "y": 3.5, "w": 1.75},
+                {"matrix": [3, 1], "x": 1.75, "y": 3.5},
+                {"matrix": [3, 2], "x": 2.75, "y": 3.5},
+                {"matrix": [3, 3], "x": 3.75, "y": 3.5},
+                {"matrix": [3, 4], "x": 4.75, "y": 3.5},
+                {"matrix": [3, 5], "x": 5.75, "y": 3.5},
+                {"matrix": [3, 6], "x": 6.75, "y": 3.5},
+                {"matrix": [3, 7], "x": 7.75, "y": 3.5},
+                {"matrix": [3, 8], "x": 8.75, "y": 3.5},
+                {"matrix": [3, 9], "x": 9.75, "y": 3.5},
+                {"matrix": [3, 10], "x": 10.75, "y": 3.5},
+                {"matrix": [3, 11], "x": 11.75, "y": 3.5},
+                {"matrix": [3, 12], "x": 14, "y": 0},
+                {"matrix": [3, 13], "x": 12.75, "y": 3.5, "w": 2.25},
+                {"matrix": [3, 14], "x": 16.25, "y": 1.5},
+                {"matrix": [4, 0], "x": 0, "y": 4.5, "w": 2.25},
+                {"matrix": [4, 1], "x": 2.25, "y": 4.5},
+                {"matrix": [4, 2], "x": 3.25, "y": 4.5},
+                {"matrix": [4, 3], "x": 4.25, "y": 4.5},
+                {"matrix": [4, 4], "x": 5.25, "y": 4.5},
+                {"matrix": [4, 5], "x": 6.25, "y": 4.5},
+                {"matrix": [4, 6], "x": 7.25, "y": 4.5},
+                {"matrix": [4, 7], "x": 8.25, "y": 4.5},
+                {"matrix": [4, 8], "x": 9.25, "y": 4.5},
+                {"matrix": [4, 9], "x": 10.25, "y": 4.5},
+                {"matrix": [4, 10], "x": 11.25, "y": 4.5},
+                {"matrix": [4, 12], "x": 12.25, "y": 4.5, "w": 1.75},
+                {"matrix": [4, 13], "x": 14.3, "y": 4.6},
+                {"matrix": [4, 14], "x": 16.25, "y": 2.5},
+                {"matrix": [5, 0], "x": 0, "y": 5.5, "w": 1.25},
+                {"matrix": [5, 1], "x": 1.25, "y": 5.5, "w": 1.25},
+                {"matrix": [5, 2], "x": 2.5, "y": 5.5, "w": 1.25},
+                {"matrix": [5, 6], "x": 3.75, "y": 5.5, "w": 6.25},
+                {"matrix": [5, 9], "x": 10, "y": 5.5},
+                {"matrix": [5, 10], "x": 11, "y": 5.5},
+                {"matrix": [5, 11], "x": 12, "y": 5.5},
+                {"matrix": [5, 12], "x": 13.3, "y": 5.6},
+                {"matrix": [5, 13], "x": 14.3, "y": 5.6},
+                {"matrix": [5, 14], "x": 15.3, "y": 5.6}
+            ]
+        }
+    }
+}