Imagine a daily life with notouch objects interaction. -Project Example- Arduino file to make your own DIY soap/hydroalcohol dispenser gel. Ultrasonic HC-SR04 or Gesture APDS 9960 sensors based. This last uses ONLY a 3.3V voltage. If NOT, you'll damage your board. Be careful.
Languages: English, Spanish.
**ESSENTIAL TO READ: ** This repository was maked for the hard global situation about the Covid-19 propagation planetary. It includes the .ino file to upload in your arduino board. The specific primary pines to build de project are:
- EMITTER PIN HC-SR04-->5
- RECEIVER PIN HC-SR04-->6
- VCC-->5v
- GND-->GND
- MICRO SERVO SG90 1 VCC-->VCC The best power supply used for the servos is an external battery 5-6V being 6V the perfect voltage. GND--GND SIG-->9
- MICRO SERVO SG90 2 VCC-->VCC The best power supply used for the servos is an external battery 5-6V being 6V the perfect voltage. GND--GND SIG-->10
CASE OF GESTURE SENSOR APDS9600:
- GND-->GND
- VCC-->3.3v
- SDA-->A4
- SCL-->A5
- INT-->D2
- MICRO SERVO SG90 1 VCC-->VCC The best power supply used for the servos is an external battery 5-6V being 6V the perfect voltage. GND--GND SIG-->9
- MICRO SERVO SG90 2 VCC-->VCC The best power supply used for the servos is an external battery 5-6V being 6V the perfect voltage. GND--GND SIG-->10
To get the electrical part list and wiring files just send me a email, it is inside bio. I'll send it for free.
REALLY YOU CAN USE THIS CODE ARCHITECTURE TO DIY ANY KIND OF PROJECT TO AUTOMATE A LOT OF THINGS JUST MODIFYING IT A LITTLE BIT. THIS PROJECT IS ONLY AN EXAMPLE OF IT ORIENTED TO THE FREQUENTLY USE OBJECTS
STAY AT HOME