Skip to content
forked from funtoo/metro

Linux Distribution Build Tool by Daniel Robbins

Notifications You must be signed in to change notification settings

matlinuxer2/metro

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Metro

Metro is a somewhat complex set of shell and python scripts and various files used to build install and LiveCD media for Gentoo Linux and its derivatives (like Funtoo Linux).

TL;DR: Quick Start Tutorial

How Metro Works

You may be wondering how Metro creates its first stage tarball. As you may have guessed, Metro cannot create a stage tarball out of thin air. To build a new stage tarball, Metro must use an existing, older stage tarball called a "seed" stage. This "seed" stage typically is used as the build environment for creating the stage we want.

Metro can use two kinds of seed stages. Traditionally, Metro has used a stage3 as a seed stage. This stage3 is then used to build a new stage1, which in turn is used to build a new stage2, and then a new stage3. This is generally the most reliable way to build Gentoo Linux or Funtoo Linux, so it's the recommended approach.

Seeds and Build Isolation

Another important concept to mention here is something called build isolation. Because Metro creates an isolated build environment, and the build environment is explicitly defined using existing, tangible entities -- a seed stage and a portage snapshot -- you will get consistent, repeatable results. In other words, the same seed stage, portage snapshot and build instructions will generate an essentially identical result, even if you perform the build a month later on someone else's workstation.

Local Build

Say you wanted to build a new pentium4 stage3 tarball. The recommended method of doing this would be to grab an existing pentium4 stage3 tarball to use as your seed stage. Metro will be told to use this existing pentium4 stage3 to build a new stage1 for the same pentium4. For this process, the generic pentium4 stage3 would provide the build environment for creating our new stage1. Then, the new stage1 would serve as the build environment for creating the new pentium4 stage2. And the new pentium4 stage2 would serve as the build environment for creating the new pentium4 stage3.

In the Metro terminology this is called a local build, which means a stage3 of a given architecture is used to seed a brand new build of the same architecture.

A week later, you may want to build a brand new pentium4 stage3 tarball. Rather than starting from the original pentium4 stage3 again, you'd probably configure Metro to use the most-recently-built pentium4 stage3 as the seed. Metro has built-in functionality to make this easy, allowing it to easily find and track the most recent stage3 seed available.

Remote Build

Metro can also perform a remote build, where a stage3 of a different, but binary compatible, architecture is used as a seed to build a different architecture stage3.

Tailored Build

Last, it's also worthy noting that both in local and remote builds, Metro can be configured to add and/or remove individual packages to the final tarball. Let's say you can't live without app-misc/screen, at the end of this tutorial, we will show how to have your tailored stage3 to include it.

Metro Data Model

The Metro Data Model has been designed to provide you with an optimal way to organize build data.

Here are the primary goals for the data model:

  • Provide useful ways to organize data
  • Use mechanisms and syntax that maximize maintainability of the data over time
  • Reduce and (ideally) eliminate side-effects at every opportunity

To attain these goals, Metro uses a functional data model, where an element (variable) can be defined only once, and cannot be redefined.

By default, the Metro parser operates in "strict" mode, which means that it will throw an error if a variable has been referenced that has not been defined. This "strict" mode is actually very useful in catching errors that might otherwise go unnoticed and result in broken builds.

In addition, the Metro parser was designed so that the order in which data elements are defined is not important, even if they reference one another. This was done to eliminate side-effects related to data ordering, where changing the order in which things are defined in a file can change the behavior of or break your code.

First Look

Here is some sample Metro data:

path: /usr/bin

Above, we have defined the element path to have the value /usr/bin. path is a single-line element, and the Metro parser takes care of trimming any trailing whitespace that may be on the line. You can also define single-line elements that have values that consist of multiple whitespace-separated values:

options: ccache replace

Sometimes, you need to define an element but leave it blank. To do this, don't specify any values after the colon:

options:

In Metro, the / character is used to delineate various classes of elements, as follows:

path/mirror: /home/mirror/funtoo
path/mirror/snapshot: /home/mirror/funtoo/snapshots
path/metro: /usr/lib/metro

Above, we see the proper Metro convention for specifying paths. Each path has a prefix of path/. We have a path/mirror element but also have a path/mirror/snapshot element. The / is used to organize our data into logical groups. This is not enforced by Metro but is presented here as a best practice.

The data above could also be represented using a section annotation, as follows:

[section path]

mirror: /home/mirror/funtoo
mirror/snapshot: /home/mirror/funtoo/snapshots
metro: /usr/lib/metro

Above, the [section path] line is a section annotation, and it tells the Metro parser that the path/ prefix should be applied to all following data elements. A section annotation is in effect until another section annotation is encountered by the parser.

While our data above is getting more organized, there is some redundancy in our data, which generally isn't a good thing. Here's an example of how to make our data a bit more compact:

[section path]

mirror: /home/mirror/funtoo
mirror/snapshot: $[path/mirror]/snapshots
metro: /usr/lib/metro

Above, we have used an element reference of $[path/mirror] to reference our path/mirror element. What this means is that path/snapshot will have a value of /home/mirror/funtoo/snapshots.

Also, it's worth pointing out that we could just have well written:

[section path]

mirror/snapshot: $[path/mirror]/snapshots
mirror: /home/mirror/funtoo
metro: /usr/lib/metro

In other words, it's perfectly OK to use the element reference of $[path/mirror] on a line before the actual definition of path/mirror. Metro doesn't care about the order in which data is defined.

Metro provides another way to organize your data in an efficient way. Supposing that you had a lot of path/mirror-related data, then it might be useful to organize your data as follows:

[section path]

metro: /usr/lib/metro

[section path/mirror]

: /home/mirror/funtoo
snapshot: $[]/snapshot
source: $[]/$[source/subarch]/funtoo-$[source/subarch]-$[source/version]/$[source/name].tar.bz2

Above, we have used two new parser features. Inside [section path/mirror], we can define the path/mirror element itself by using a blank element name, followed by a :. The next parser feature we see above is that we can use $[] to reference the value of the path/mirror value. $[] will always reference the value of the element specified in the section annotation. Also note that as of Metro 1.1, $[:] can be used as an alternate form of $[]. In addition, as of Metro 1.2.4, $[:foo] can be used as an alternate form of $[section-name/foo].

Collect Annotations

Many scripting languages have the notion of an "include" file, or "importing" additional data from a remote file. Metro has this concept as well, but it is implemented in a somewhat different way. You can tell Metro to include data from another file by using a collect annotation.

A collect annotation looks like this:

[collect $[path/metro]/myfile.txt]

Now, we called these things "collect annotations" for a reason - in Metro, they work slightly different than most languages implement include and import. The main difference is that in Metro, a collect annotation does not happen right away. Instead, Metro will add the file to be collected (in this case, that would be the file /usr/lib/metro/myfile.txt, or whatever $[path/metro]/myfile.txt evaluates to) to a collection queue.

This means that Metro will read in the contents of the file at some point in time, and the data in the file will be available to you by the time the parsing is complete. But because Metro doesn't care about the order in which data is defined, it doesn't have the same concept of "read in the data - right now!" that an include or import statement does in other languages.

Conditional Collect Annotations

Metro no longer officially supports conditional collect annotations; however, simple collect annotations can be used to make conditional decisions in Metro, as follows:

[collect ./snapshots/$[snapshot/type]]

Above, Metro will collect from a file based on the value of the $[snapshot/type] element. This allows for varying definitions of elements to exist dependent on the value of $[snapshot/type].

Above, Metro will raise an exception if $[snapshot/type] is undefined or has a value that does not map to a file on disk. If it is possible that $[snapshot/type] may not be defined, use the following format:

[collect ./snapshots/$[snapshot/type:zap]]

Using the :zap modifier, the entire collect argument will be replaced with the empty string if $[snapshot/type] is undefined. If Metro is asked to collect an empty string, it will not throw an exception. So this is a handy way to conditionally disable collection of a file. But please note that for all non-null values of $[snapshot/type], a corresponding file must exist on disk in ./snapshots/ or Metro will throw an exception. :zap is explained in more detail in the "Special Variable Expansion" section, below.

Multi-line elements

Metro supports multi-line elements and they are the foundation of Metro's template engine. A multi-line element can be defined as follows, by using square brackets to delimit multi-line data:

myscript: [
#!/bin/bash
echo $*
]

The terminating closing square bracket should be on a line all by itself.

One of the very useful things about multi-line elements is that they support Metro element references:

myscript: [
#!/bin/bash
echo Metro's path/metro setting is $[path/metro].
]

In the above multi-line element, the $[path/metro] reference will be expanded to contain the appropriate value of the element. It is possible to expand single-line elements inside multi-line elements simply by referencing them using a dollar sign and square brackets.

Metro also allows you to expand multi-line elements inside other multi-line elements. Here's an example of how that works:

myscript: [
#!/bin/bash
$[[steps/setup]]
echo Hi There :)
]

About

Linux Distribution Build Tool by Daniel Robbins

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 94.6%
  • Shell 5.4%