Releases: mi0iou/RPi_Wobbulator
RPi Wobbulator Software V2.7.1
Updated version of the RPi Wobbulator software now with expanded dBm scale for channel 2 and simplified user intterface.
For the very latest updates and discussions please visit the RPi Wobbulator Yahoo group.
RPi Wobbulator Software V2.7.0
Updated version of the RPi Wobbulator software now with user selectable ADC resolution and Sample Rate
For the very latest updates and discussions please visit the RPi Wobbulator Yahoo group.
RPi Wobbulator Software V2.6.6
Updated version of the RPi Wobbulator software now with improved Y axis scales and auto selection of linear scale when channel 1 (linear detector) is selected.
For the very latest updates and discussions please visit the RPi Wobbulator Yahoo group.
RPi Wobbulator Software V2.6.4
Updated version of the RPi Wobbulator software now with option to display Y axis in Volts or dBm
For the very latest updates and discussions please visit the RPi Wobbulator Yahoo group.
RPi Wobbulator Software V2.5.9
Updated version of the RPi Wobbulator software with many new features including:
- Frequency and Voltage labels
- X and Y Scales
- Sweep settings now saved in a parameter file
- User menus
- K(Hz) and M(Hz) conversion
- User description panel
- Single sweep option
For the very latest updates and discussions please visit the RPi Wobbulator Yahoo group.
RPi Wobbulator Software V2.2
Edits by Tony Abbey for optional screen clear feature after every sweep and incorporation of code suggested by Fred LaPlante for a "scope-like" trace. Implementation of "Fast" option to run the ADC chip at full speed and 12 Bit resolution. Code was also modified so that the display grid is on by default when the software is run.
Raspberry Pi Wobbulator V2.1
Code has been modified to clear the display between each cycle of the frequency sweep, this emulating the behaviour of a conventional wobbulator more closely. This should make the software more useful when it is used to adjust tuneable filters. For other minor changes please see README.txt.
Raspberry Pi Wobbulator v2.0
Thanks to Tony Abbey for his work developing the software for this new version.
ADC now runs at 60 samples per second with 14 Bit resolution, in one-shot mode. This has led to an improvement in performance (in terms of time taken to perform a sweep) of about x10.
Software also now starts up with frequency scan values as follows:
Start Frequency 14967000 Hz
Stop Frequency 14972000 Hz
Step 100 Hz
Raspberry Pi Wobbulator v1.1
Revised version of the Raspberry Pi Wobbulator software. Now designed to work with onboard ADC chip. New "Bias" option added to allow user to choose whether or not to compensate for any bias on the input signal to the ADC.
Raspberry Pi Wobbulator
Initial release of the Raspberry Pi Wobbulator software.