Skip to content

Latest commit

 

History

History
88 lines (61 loc) · 3.12 KB

README.md

File metadata and controls

88 lines (61 loc) · 3.12 KB
Raw

What is this project

This is an adapted version of drmon written by aedan. It has been modified to use the algoritm and positions from OmegaPhi115. Draconic Reactor

status: currently in development

drmon

Monitor and failsafe automation for your draconic reactor.

Bat

Monitor for Draconic Storage.

Pocket

Remote access to reactor controls and monitoring.

What is this

This is a set of computercraft LUA scripts that monitors everything about a draconic reactors and storage, with a couple features to help keep it from exploding NB: This is for Minecraft 1.12.2. You will need to answer some questions on console during install.

Tutorial

1.7.10: You can find a very well made youtube tutorial on how to set this up here, thank you The MindCrafters.

I have not created a tutorial for 1.12.2 yet.

Features

  • Uses a 3x3 advanced computer touchscreen monitor to interact with your reactor
  • Automated regulation of the input gate for the targeted field strength of 50%
  • Immediate shutdown and charge upon your field strength going below 25%
    • Reactor will activate upon a successful charge
  • Immediate shutdown when your temperature goes above 8000C
    • Reactor will activate upon temperature cooling down to 7000C
  • Easily tweak your output flux gate via touchscreen buttons
    • +/-100k, 10k, and 1k increments
  • Monitor storage cell capacity on 3x3 screen connected the same way as reactor monitoring
  • Remote monitoring is available via ender modems(optional)
    • Remote monitoring can monitor multiple reactors at once.
    • Allows for remote status, shutdown, startup of reactors and patching

Requirements

  • One fully setup draconic reactor (and fuel, obviously);
  • 1 advanced computer;
  • 9 advanced monitors;
  • 3 wired modems, wireless will not work;
  • A bunch of network cables;
  • 1 ender modem (Optional);

Installation

  • Your reactor output flux gate must be setup so that one side of it and one of your stabilizers touches a side of the advanced computer;
  • By default, flux gate should touch the top side, stabilizer on the left of the computer;
    • If you want to use different sides you need to modify startup after you have installed this and specify the sides;
  • Connect a modem to your input flux gate (the one connected to your reactor energy injector);
  • Connect a modem to your advanced computer (at the botom side);
  • Setup your monitors to be a 3x3 and connect a modem to anywhere but the front;
  • Run network cable to all 3 modems;
  • Install this code via running the install script using these commands:
> pastebin get GpzjGHH4 startup
> startup

> On Advanced ender pocket computer (Optional)
> pastebin get PUWxdYWY startup
> startup
  • You should see stats in your term, and on your monitor

Upgrading to the latest version

  • Right click your computer;
  • Hold ctrl+t until you get a >;
> reboot

Known issues

  • There is a problem with skyfactory 2.5 and pastebin, see workarounds here.