What is this project

This is an adapted version of drmon written by aedan. It has been modified to use the algoritm and positions from OmegaPhi115.

status: currently in development

drmon

Monitor and failsafe automation for your draconic reactor.

Bat

Monitor for Draconic Storage.

Pocket

Remote access to reactor controls and monitoring.

What is this

This is a set of computercraft LUA scripts that monitors everything about a draconic reactors and storage, with a couple features to help keep it from exploding NB: This is for Minecraft 1.12.2. You will need to answer some questions on console during install.

Tutorial

1.7.10: You can find a very well made youtube tutorial on how to set this up here, thank you The MindCrafters.

I have not created a tutorial for 1.12.2 yet.

Features

• Uses a 3x3 advanced computer touchscreen monitor to interact with your reactor
• Automated regulation of the input gate for the targeted field strength of 50%
• Immediate shutdown and charge upon your field strength going below 25%
  • Reactor will activate upon a successful charge
• Immediate shutdown when your temperature goes above 8000C
  • Reactor will activate upon temperature cooling down to 7000C
• Easily tweak your output flux gate via touchscreen buttons
  • +/-100k, 10k, and 1k increments
• Monitor storage cell capacity on 3x3 screen connected the same way as reactor monitoring
• Remote monitoring is available via ender modems(optional)
  • Remote monitoring can monitor multiple reactors at once.
  • Allows for remote status, shutdown, startup of reactors and patching

Requirements

• One fully setup draconic reactor (and fuel, obviously);
• 1 advanced computer;
• 9 advanced monitors;
• 3 wired modems, wireless will not work;
• A bunch of network cables;
• 1 ender modem (Optional);

Installation

• Your reactor output flux gate must be setup so that one side of it and one of your stabilizers touches a side of the advanced computer;
• By default, flux gate should touch the top side, stabilizer on the left of the computer;
  • If you want to use different sides you need to modify startup after you have installed this and specify the sides;
• Connect a modem to your input flux gate (the one connected to your reactor energy injector);
• Connect a modem to your advanced computer (at the botom side);
• Setup your monitors to be a 3x3 and connect a modem to anywhere but the front;
• Run network cable to all 3 modems;
• Install this code via running the install script using these commands:

> pastebin get GpzjGHH4 startup
> startup

> On Advanced ender pocket computer (Optional)
> pastebin get PUWxdYWY startup
> startup

• You should see stats in your term, and on your monitor

Upgrading to the latest version

• Right click your computer;
• Hold ctrl+t until you get a >;

> reboot

Known issues

• There is a problem with skyfactory 2.5 and pastebin, see workarounds here.