Open
Conversation
May need a little work if you want to use screws. The holes came out slightly too small for 3mm screws. I ended up just using zip ties to attach the controller. Mount is made up of 2 pieces, an extender that provides some distance from the 2020 extrusion so the mount clears the x-axis motor. And a thin mount for the RAMBo controller that connects to that extender. Making this 2 pieces gives a few advantages: - The whole thing can be printed flat without any support material (any other orientation would require significant support material due to the nature of this mount. - The screws connecting the mount to the frame can be accessed without removing the controller from its frame. - The extender design can be re-used for any other mount as large as the RAMBo which cannot fit the way a RAMPS might.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
May need a little work if you want to use screws. The holes came out slightly too small for 3mm screws. I ended up just using zip ties to attach the controller.
Mount is made up of 2 pieces, an extender that provides some distance from the 2020 extrusion so the mount clears the x-axis motor.
And a thin mount for the RAMBo controller that connects to that extender.
Making this 2 pieces gives a few advantages:
Here's a picture of the mount in action:
