| Footprint | Parts | Size | Value | LCSC | Remark |
|---|---|---|---|---|---|
| C1-C8 | Decoupling Capacitors | 0805 | 100nF | C49678 | |
| C9 | Electrolytic Capacitor | TBD | 1000uF | TBD | Optional. THT on rev1, SMD on later revisions |
| CN1,CN2 | JST XA 3 pin | C265055 | B03B-XASK-1(LF)(SN) | ||
| CN3 | JST XA 4 pin | C264994 | B04B-XASK-1(LF)(SN) | ||
| D1-D8 | Worldsemi WS2813E | C160214 | |||
| R1,R2 | 0805 | 100R | C17408 | ||
| U1,U2 | MMBD1503A | C242273 |
| Footprint | Parts | Size | Value | LCSC | Remark |
|---|---|---|---|---|---|
| C1-C8 | WS2813B-V5 do not require decoupling caps | ||||
| C9 | Electrolytic Capacitor | TBD | 1000uF | TBD | Optional. THT on rev1, SMD on later revisions |
| CN1,CN2 | JST XA 3 pin | C265055 | B03B-XASK-1(LF)(SN) | ||
| CN3 | JST XA 4 pin | C264994 | B04B-XASK-1(LF)(SN) | ||
| D1-D8 | Worldsemi WS2813B-V5 | C965558 | |||
| R1,R2 | 0805 | 100R | C17408 | ||
| U1,U2 | MMBD1503A | C242273 |
According to page 7: These LEDs are moisture sensitive, they need to be baked and dried before SMT assembly. Not all PCB fabs have this procedure (eg JLCPCB's economic option), be sure to consult and notify the fab of your choice before mass producing the PCBs, otherwise you may end up with extremely high failure rate. (I learnt it the hard way so you don't have to.)
PCB thickness: 1.6mm
Color: White
I don't feel like spending time on a inferior design so no.
This project is under the GNU General Public License v3.0.
-
Commercial use of this project is allowed (i.e. you can go fab these designs and sell them for profit)
-
Modifications based on this project needs to be open sourced under the GPLv3 license.