c9

Inc/config.h

@@ -73,7 +73,7 @@
  * Then you can verify voltage on debug output value 6 (to get calibrated voltage multiplied by 100).
 */
 #define BAT_FILT_COEF           655       // battery voltage filter coefficient in fixed-point. coef_fixedPoint = coef_floatingPoint * 2^16. In this case 655 = 0.01 * 2^16
-#define BAT_CALIB_REAL_VOLTAGE  3970      // input voltage measured by multimeter (multiplied by 100). In this case 43.00 V * 100 = 4300
+#define BAT_CALIB_REAL_VOLTAGE  3120      // input voltage measured by multimeter (multiplied by 100). In this case 43.00 V * 100 = 4300
 #define BAT_CALIB_ADC           1492      // adc-value measured by mainboard (value nr 5 on UART debug output)
 #define BAT_CELLS               10        // battery number of cells. Normal Hoverboard battery: 10s
 #define BAT_LVL2_ENABLE         0         // to beep or not to beep, 1 or 0