This ROS node bridges between ROS and the Azure Language Understanding Service. The ROS node can be configured to process audio directly from a microphone, or can subscribe to a ROS audio topic, then processes speech and generates "intent" ROS messages which can be processed by another ROS node to generate ROS commands.
NOTE: This ROS node is in preview.
This ROS node works on ROS1 Melodic forward, with Linux and Windows.
During the preview, this ROS node will be provided as sourcecode.
The Makefile for the LUIS ROS Node will download the LUIS SDK using Nuget.exe when it is present in the path.
Please install ROS1 per the instructions at Microsoft's ROS Landing page
mkdir c:\ws\luis_ws\src
cd c:\ws\luis_ws\src
git clone --recursive https://github.com/ms-iot/ros_msft_luis
git clone https://github.com/ms-iot/audio_common
cd c:\ws\luis_ws
catkin_make
devel\setup.batsudo apt-get update
sudo apt-get install build-essential libssl1.0.0 libasound2 wget
mkdir ~/luis_ws/src
cd ~/luis_ws/src
git clone --recursive https://github.com/ms-iot/ros_msft_luis
cd ~/luis_ws
catkin_make
source devel/setup.bashTo get started with LUIS and the Speech Services, check this guideline.
APP ID - In Manage Tab --> Settings --> App ID
Primary Key - In the Manage Tab --> Azure Resources --> Prediction Resources --> Primary Key
Location - In the Manage Tab --> Azure Resources --> Rediction Resources --> Location
The ROS node requires the following information from the portal of speech studio
Speech Resource Key
Region information example "westus" if it is "West US", "westus2" if it is "West US 2"
The LUIS ROS node can be configured two ways - by embedded in the Azure resource keys in the launch file, or setting them in the environment.
if you are committing launch files to an open source repo, it is best to use the environment method as to not leak your keys.
Windows:
set azure_cs_luis_appid=<Enter your APP ID mentioned above>
set azure_cs_luis_key=<Enter your Primary Key mentioned above>
set azure_cs_luis_region=<Enter your location mentioned above>
set azure_cs_kw_key=<Enter your key mentioned above from the speech studio>
set azure_cs_kw_region=<Enter your location mentioned above from the speech studio>
set azure_cs_kw_path=<Enter the location of the of .table file that you downloaded from above>
set azure_cs_stop_kw_path=<Enter the location of the of .table file of the Stop Keyword that you downloaded from above>
set azure_cs_kw=<Enter your custom keyword>
set azure_cs_stop_kw=<Enter your stop custom keyword>NOTE: You can use the command
setxinstead ofsetto save this to the system environment. However, you'll have to recycle your command window.
Ubuntu:
export azure_cs_luis_appid=<Enter your APP ID mentioned above>
export azure_cs_luis_key=<Enter your Primary Key mentioned above>
export azure_cs_luis_region=<Enter your location mentioned above>
export azure_cs_kw_key=<Enter your key mentioned above from the speech studio>
export azure_cs_kw_region=<Enter your location mentioned above from the speech studio>
export azure_cs_kw_path=<Enter the location of the of .table file that you downloaded from above>
export azure_cs_stop_kw_path=<Enter the location of the of .table file of the Stop Keyword that you downloaded from above>
export azure_cs_kw=<Enter your custom keyword>
export azure_cs_stop_kw=<Enter your stop custom keyword>NOTE: You may wish to place this in your .shellrc file so it is available in each terminal.
roslaunch ros_msft_luis luis.launch
If you would like to use a custom microphone, such as the Respeaker which is available on the Hello Robot, you can set the subscription topic in the launch file:
<launch>
<node name="luis_test" pkg="ros_msft_luis" type="ros_msft_luis_node" output="screen">
<arg name="mic_topic" value="/audio">
</node>
</launch>The ros_msft_luis_move_base node is provided to translate the intents into move_base navigation goals. It currently understands the following intents:
- "Move Forward" / "Move Backward", followed by a distance expressed in meters, feet or yards. For example: "move forward 2 meters", "move backward 3 feet".
- "Turn Left" / "Turn Right", followed by an angle expressed in degrees. For example: "turn left 34 degrees". If no angle is given, a default of 90 degrees will be used, so you can just say "turn right" for example.
- "Stop", which cancels all current navigation.
To launch the node, you can use the provided launch configuration:
roslaunch ros_msft_luis luis_move_base.launch
The ros_msft_luis_moveit node is provided to translate the intents into MoveIt movements. It was developed with a simulated xArm robotic arm, and thus has some hard-coded values in the code that are specific to this device, in ros_msft_luis_moveit/src/ros_msft_luis_moveit.cpp:
static const std::string PLANNING_GROUP_ARM = "xarm7";
static const std::string PLANNING_GROUP_HAND = "xarm_gripper";If you are using a different robotic arm, you will need to adjust these values to match the names of the planning groups.
The node currently implements the following intents:
- Arm movements: "Forward", "Backward", "Up", "Down", "Left", "Right". These directions can be followed by a length expressed in centimeters, feet or inches. For example: "raise arm one foot", "move arm backward 3 inches".
- Hand movements: "Open" and "Close". Note that these two intents are using pre-defined named targets that are probably specific to the xArm grippper.
- "Stop", which stops all movements.
To launch the node, you can use the provided launch configuration:
roslaunch ros_msft_luis luis_moveit.launch
The Azure Cognitive Services support edge deployments using containers, including Speech-to-Text and Language Understanding Service (LUIS). These models can be deployed directly to the robot if there are sufficient resources, or can be deployed to an edge server or Kubernetes cluster.
Starting the Speech-to-Text container
You will first need to run the Speech container. Please refer to the documentation for using Speech Services containers.
You will need to select a local port to expose the Speech service; in this example, 5000.
docker run --rm -it -p 5000:5000 \
--memory 4g --cpus 4 \
mcr.microsoft.com/azure-cognitive-services/speechservices/speech-to-text \
Eula=accept \
Billing=<your endpoint URI> \
ApiKey=<your API key>
Starting the LUIS container
The language model you have defined is exported from the Azure LUIS portal and injected into the container when started. Please refer to the documentation for using a LUIS Container.
You will find below an example running the LUIS node using Docker. In this case, the exported language model has been downloaded into the ROS workspace root c:\ws\luis_ws, and mounted into the /input and /output directory. (the language model is an input, logs are output).
Make sure to use a different local port than the one used for the Speech container: in this example, 5001.
docker run --rm -it -p 5001:5000 ^
--memory 4g ^
--cpus 2 ^
--mount type=bind,src=c:\ws\luis_ws,target=/input ^
--mount type=bind,src=c:\ws\luis_ws,target=/output ^
mcr.microsoft.com/azure-cognitive-services/luis ^
Eula=accept ^
Billing=https://westus.api.cognitive.microsoft.com/ ^
ApiKey=<your API key> ^
Logging:Console:LogLevel:Default=DebugStarting the ROS node
The containers expose endpoints in the form of URLs like these:
- LUIS:
http://localhost:5001 - Speech:
ws://localhost:5000/speech/recognition/conversation/cognitiveservices/v1
In order for the ROS node to use these endpoints, they must be configured via additional environment variables (which are shared by all ROS LUIS instances) or by ladditional parameters in the aunch file (which could allow multiple concurrent language models).
Make sure to use the right local ports, defined when running the containers!
If you chose to use environment variables, they can be configured in your launch shell or in the system by setting the following environment variables:
Windows:
set azure_cs_luis_endpoint=http://host:port
set azure_cs_speech_endpoint=ws://host:port/speech/recognition/conversation/cognitiveservices/v1Ubuntu:
export azure_cs_luis_endpoint=http://host:port
export azure_cs_speech_endpoint=ws://host:port/speech/recognition/conversation/cognitiveservices/v1You can also specify the endpoint parameters in the XML launch file:
<launch>
<node name="luis_test" pkg="ros_msft_luis" type="ros_msft_luis_node" output="screen">
<param name="luisendpoint" value="<endpoint>" />
<param name="speechendpoint" value="<endpoint>" />
<!-- other configuration parameters as defined above -->
</node>
</launch>You can then run the ROS node as previously.
roslaunch ros_msft_luis luis.launch
The LUIS Ros node supports two types of microphones:
- External microphone topic from another node
- Embedded microphone - which is 4 channel ReSpeaker MicArray V2.0
To enable the support of the Microphone array, you need to specify the DeviceGeometry and the SelectedGeometry variables in the azure_cs_luis.cpp file.
Coming in Fall 2020