These evaluation boards are designed to give you a quick start to explore the LoRa/LPWAN world. Based on our WisBlock product line, they are 30 x 60 mm small and support USB power supply, 3.7V LiPo battery and 5V solar charging.
These modules can be extended with most of our WisBlock Sensor and WisBlock IO modules. Check out the available WisBlock IO and WisBlock Sensor modules in the RAKwireless Store
To make it easy for you to start, these modules are pre-flashed with a basic firmware that offers an AT command interface over the USB connector to setup and connect them to a LPWAN gateway and server.
Please check out our documentation pages for more details.
There are three different LPWAN Evalution Boards available:
The RAK4260 is based on the Microchip ATSAMR34J18 MCU with an integrated LoRa® transceiver, that complies with the LoRaWan® 1.0.2 protocols.
- ATSAMR34J18B MCU
- 32-bit Arm® Cortex M0+ MCU
- UART/I2C/GPIO
- 256KB Flash and 40 KB RAM
- Integrated LoRa® transceiver
- Frequency range: 862 to 1020 MHz
- Receive Sensitivity down to -148 dBm
- Maximum Transmit Power up to 20 dBm
The RAK4260 is available for the following LPWAN regions:
| EU868 | IN865 |
| US915 | AU915 |
| RU864 | AS923 |
| KR920 |
Learn in RAK4260 how to setup the ArduinoIDE and check out our sample application.
More details can be found in our Web Documentation
The 4600 is based on the nRF52832 MCU and a SX1276 LoRa® transceiver, that complies with the LoRaWan® 1.0.2 protocols.
- nRF52832 MCU
- 64MHz Cortex-M4 with FPU
- UART/I2C/GPIO
- 512 kB flash
- 64kB RAM
- SX1276 LoRa® transceiver
- Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
- Ultra-Low Power Consumption 1.5uA in sleep mode
- 8 mBit NOR flash
The RAK4200 is available for the following LPWAN regions:
| EU433 | IN865 |
| EU868 | AU915 |
| US915 | AS923 |
| CN470 | KR920 |
| RU864 |
Learn in RAK4600 how to setup the ArduinoIDE and check out our sample application.
Learn in RAK4600 how to program the RAK4600 in microPython.
More details can be found in our Web Documentation
The RAK811 is based on the STM32L151 MCU and a SX1276 LoRa® transceiver, that complies with the LoRaWan® 1.0.2 protocols.
- STM32L151 MCU
- ARM 32-bit Cortex – M3
- UART/I2C/GPIO
- 128KB flash memory with ECC
- 16KB RAM
- SX1276 LoRa® transceiver
- Frequency range: 863–870MHz (EU) / 902–928MHz (US), ISM and SRD systems
- Ultra-Low Power Consumption 1.5uA in sleep mode
The RAK811 is available for the following LPWAN regions:
| EU433 | IN865 |
| EU868 | AU915 |
| US915 | AS923 |
| CN470 | KR920 |
| RU864 |
Learn in RAK811 how to setup the ArduinoIDE and check out our sample application.
More details can be found in our Web Documentation