Demo video
| Home screen 1 | Home screen 2 | Widgets |
|---|---|---|
 |
 |
 |
| RGBCCT light | Switches | Curtain |
 |
 |
 |
| Thermostat | 8 | 9 |
 |
- Fully functional HomeScreen with weather forecast from HomeAssistant, temperature display from internal sensor or home assistant entity and humidity display from specified sensor entity,
- Easy add widgets to control HomeAssistant entities and reacts when entities states change.
- Support of following widgets:
- Single, double, triple and quad switch,
- Curtain control,
- RGB light,
- Dimmable light,
- CCT light,
- RGBCCT light
- Thermostat with heating or cooling mode, hysteresis and Auto/Manual modes,
- Buzzer predefined sounds with single and loop playing,
- Commands model for easy control display using NodeRed flows.
- NSPanel with oryginal screen tft firmware,
- MQTT Broker (see mosquitto),
- HomeAssistant (see homepage),
- Node-Red (see homepage).
Before setup use Ewelink app to update NSPanel to newest version.
- Flash NSPanel ESP32 with tasmota (link),
- Apply Tasmota template:
{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1,"CMND":"ADCParam1 2,11200,10000,3950 | Sleep 0 | BuzzerPWM 1 | SetOption13 1"}
- Upload modified driver nspanel.be and autoexec.be files to tasmota file system and restart NSPanel,
- Connect tasmota to MQTT broker (link),
- Import NSPanelRed subflow to NodeRed (link),
- Configure subflow.
| Setting | Description |
|---|---|
| Name | Name of the node |
| Config | Configuration JSON |
| MQTT | MQTT configuration node |
| HAServer | HomeAssistant server configuration node |
{
"debug": false,
"tele_topic": "NSPanel/tele/",
"cmnd_topic": "NSPanel/cmnd/",
"weather": "weather.forecast_dom",
"temperature": "sensor.sypialnia_temperatura_wilgotnosc_temperature",
"temperature_unit": "C",
"temperature_calibration": 0,
"temperature_multipler": 10,
"humidity": "sensor.sypialnia_temperatura_wilgotnosc_humidity",
"eco_mode": 0,
"thermostat": {
"type": "hot",
"hysteresis": 1,
"entities": [
"switch.sypialnia_gniazdko_szafka_led"
]
},
"widgets": [
{
"index": 1,
"ctype": "device",
"uiid": "vswitch",
"label": "Sufit",
"entities": [
"switch.sypialnia_przekaznik_oswietlenie_sufit_left",
"switch.sypialnia_przekaznik_oswietlenie_sufit_right"
]
},
{
"index": 2,
"ctype": "device",
"uiid": "hswitch",
"label": "Wiatrak",
"entities": [
"switch.sypialnia_gniazdko_wentylator"
]
},
{
"index": 3,
"ctype": "device",
"uiid": "rgbcctlight",
"label": "Candela",
"entities": [
"light.sypialnia_candela"
]
},
{
"index": 4,
"ctype": "device",
"uiid": "rgblight",
"label": "C.lamp",
"entities": [
"light.sypialnia_corner_lamp"
]
},
{
"index": 5,
"ctype": "device",
"uiid": "hswitch",
"label": "Lampa",
"entities": [
"switch.sypialnia_listwa_ldnio_lampa"
]
},
{
"index": 6,
"ctype": "device",
"uiid": "vswitch",
"label": "Szafka",
"entities": [
"switch.sypialnia_gniazdko_szafka_led"
]
},
{
"index": 7,
"ctype": "device",
"uiid": "curtain",
"label": "Rolety",
"entities": [
"cover.sypialnia_zaluzja_lewa",
"cover.sypialnia_zaluzja_prawa"
]
},
{
"index": 8,
"ctype": "scene",
"label": "Klimat",
"entities": [
"scene.klimatycznie"
]
}
]
}
| Name | Description | Value | Required |
|---|---|---|---|
| name | Panel name (for commands) | string | NO |
| group | Panel group (for commands) | string | NO |
| debug | Debug mode | bool | NO |
| eco_mode | Energy saving mode | 0-dim, 1-off | NO |
| tele_topic | Tasmota tele topic | string | YES |
| cmnd_topic | Tasmota cmnd topic | string | YES |
| weather | Weather forecast entity name | string | YES |
| temperature | Temperature entity name or "internal" for internal NSPanel sensor | string | NO |
| temperature_unit | Temperature unit | C or F | NO |
| temperature_calibration | Temperature calibration, this value is added to input temperature and result is send to screen | number | YES |
| temperature_multipler | Temperature multipler, input temperature is multiplied by this value before send to screen | number | YES |
| humidity | Humidity entity name | string | YES |
| thermostat | Thermostat object | object | NO |
| thermostat.type | Type of thermostat | string (hot or cold) | NO |
| thermostat.hysteresis | Thermostat hysteresis | number | NO |
| thermostat.entities | array of entities to control (on/off) by thermostat | array of string | NO |
| widgets | array of widget object | array of object (max 8) | NO |
| widget.index | Widget index on screen | number (1-8) | YES |
| widget.ctype | Widget type | string (device, group or scene) | YES |
| widget.uiid | Widget uiid (scene dont have uiid) | string (hswitch, vswitch, curtain, rgblight, dimmablelight, cctlight, rgbcctlight, acc) | YES |
| widget.label | Widget label dispayed on screen | string (max 8 chars) | NO |
| widget.entities | array of entities controled by widget. State of all entities will be set by widget but state of only first entity in array will be reflected on screen | array of string | YES |
Important
If panel name or group is set in config all command messages for this display must have corresponding nsPanel/nsGroup keys with valid values. e.g. You have two panels on the first floor and two on the second floor with in groups “FirstFloor” and “SecondFloor” and you want all the panels on the first floor to restart, to do this you need to send a message: { “command”: “Restart”, “nsGroup”: “FirstFloor”}.
| Name | Desctiption | Parameters |
|---|---|---|
| GetHelp | Print all available commands with description to debug pane | None |
| Restart | Restart nsPanel | None |
| EnterTestMode | Enter screen factory test mode. To leave this mode restart nsPanel | None |
| SetWallpaper | Set home screen wallpaper | 0-bedroom, 1-livingroom, 2-black for fw 1.5+ |
| ATC.SetManualTemp | Set thermostat target temperature for manual mode | Target temperature (number) |
| ATC.SetAutoTemp | Set thermostat target temperature for auto mode | Target temperature (number) |
| ATC.SetMode | Set thermostat mode | 0-manual, 1-auto |
| ATC.SetEnabled | Set thermostat enabled state | 0-disabled, 1-enabled |
| ATC.GetType | Get thermostat type (hot or cold) | None |
| ATC.GetHysteresis | Get thermostat hysteresis | None |
| ATC.GetRoomTemp | Get current room temperature stored in thermostat | None |
| ATC.GetState | Get thermostat state (heating, cooling, iddle) | None |
| ATC.GetStateOnOff | Get thermostat state (on or off) | None |
| ATC.GetMode | Get thermostat mode (0-manual, 1-auto) | None |
| ATC.GetEnabled | Get thermostat enabled state (0-disabled, 1-enabled) | None |
| ATC.GetManualTemp | Get thermostat target temperature for manual mode | None |
| ATC.GetAutoTemp | Get thermostat target temperature for auto mode | None |
| Buzzer.PlayLoop | Plays a sound in loop until StopLoop is called | info, confirm, error alarm |
| Buzzer.StopLoop | Stop playing sound in loop | None |
| Buzzer.PlayingLoop | Return true if buzzer playing sound in loop, otherwise return false | None |
| Buzzer.Info | Play single info sound from internal buzzer | None |
| Buzzer.Confirm | Play single confirm sound from internal buzzer | None |
| Buzzer.Error | Play single error sound from internal buzzer | None |
| Buzzer.Alarm | Play single alarm sound from internal buzzer | None |