Prepare release 0.7.0

Change-Id: I3d707d1f1684879fa9133ac87d1b53710465dea1

.jenkins

@@ -32,6 +32,9 @@ if [[ $JOB_NAME == *"code-coverage" ]]; then
     export DISABLE_HEADERS_CHECK=yes
 fi
 
+# https://reproducible-builds.org/docs/source-date-epoch/
+export SOURCE_DATE_EPOCH=$(git log -1 --format=%ct)
+
 for file in .jenkins.d/*; do
     [[ -f $file && -x $file ]] || continue
 

.jenkins.d/10-build.sh

@@ -27,7 +27,7 @@ if [[ $JOB_NAME != *"code-coverage" && $JOB_NAME != *"limited-build" ]]; then
 fi
 
 # Build in debug mode with tests
-./waf --color=yes configure --debug --with-psync --with-chronosync --with-svs --with-tests $ASAN $COVERAGE
+./waf --color=yes configure --debug --with-chronosync --with-psync --with-svs --with-tests $ASAN $COVERAGE
 ./waf --color=yes build
 
 # (tests will be run against the debug version)

docs/doxygen.conf.in

@@ -1090,14 +1090,6 @@ HTML_COLORSTYLE_SAT    = 0
 
 HTML_COLORSTYLE_GAMMA  = 91
 
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded.
@@ -1367,17 +1359,6 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
 # http://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using prerendered bitmaps. Use this if you do not have LaTeX
@@ -1640,16 +1621,6 @@ LATEX_BATCHMODE        = NO
 
 LATEX_HIDE_INDICES     = NO
 
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
 # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
@@ -1980,15 +1951,6 @@ EXTERNAL_PAGES         = YES
 # Configuration options related to the dot tool
 #---------------------------------------------------------------------------
 
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = YES
-
 # If set to YES, the inheritance and collaboration graphs will hide inheritance
 # and usage relations if the target is undocumented or is not a class.
 # The default value is: YES.
@@ -2014,23 +1976,6 @@ HAVE_DOT               = @HAVE_DOT@
 
 DOT_NUM_THREADS        = 0
 
-# When you want a differently looking font n the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
 # By default doxygen will tell dot to use the default font as specified with
 # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
 # the path where dot can find it using this tag.

docs/release-notes.rst

@@ -1,4 +1,4 @@
 Release Notes
 =============
 
-.. include:: release-notes/release-notes-0.6.0.rst
+.. include:: release-notes/release-notes-0.7.0.rst

docs/release-notes/release-notes-0.7.0.rst

@@ -0,0 +1,44 @@
+NLSR version 0.7.0
+------------------
+
+Release date: August 18, 2023
+
+New features
+^^^^^^^^^^^^
+
+- Add experimental support for State Vector Sync (SVS) (:issue:`5248`)
+- ``nlsrc``: Add an option to query the status from remote routers (:issue:`4544`)
+
+Notable changes and improvements
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+- **Deprecate ChronoSync support**: ChronoSync support is now optional and excluded from the
+  default build; it remains available mainly for testing purposes (:issue:`5147`)
+- Switched to the C++17 standard
+- The minimum build requirements have been increased as follows:
+
+  - Either GCC >= 7.4.0 or Clang >= 6.0 is required on Linux
+  - On macOS, Xcode 11.3 or later is recommended; older versions may still work but are not
+    officially supported
+  - Boost >= 1.65.1 and ndn-cxx >= 0.8.1 are required on all platforms
+  - Sphinx 4.0 or later is required to build the documentation
+
+- Refactor LSDB for readability and add signals to notify of modifications (:issue:`4127`)
+- Retrieve LSA from the face that triggered the notification of LSA changes
+- Accommodate certificate name in ``KeyLocator`` (:issue:`5195`)
+- Change ``sig-type`` to ``ecdsa-sha256`` in ``nlsr.conf`` as ndn-cxx now has strict checking for it
+- Improve error handling and reporting
+- Stop using the ``gold`` linker on Linux; prefer instead linking with ``lld`` if installed
+- Update waf build system to version 2.0.24
+- Various test suite and documentation improvements
+
+Bug fixes
+^^^^^^^^^
+
+- lsdb: Fix for issues involving incorrect retransmission behavior in segment fetcher
+- Prevent NLSR from unregistering route during update for router that advertised it initially
+  (:issue:`5179`)
+- NameLsa: fix LSDB update bug by sorting the NPLs before difference
+- Fix recurring sync prefix registration on every hello data (:issue:`5157`)
+- Return the appropriate exit codes when executing ``nlsrc`` advertise/withdraw commands
+  (:issue:`5271`)

docs/releases.rst

@@ -1,5 +1,5 @@
-NLSR Versions
-=============
+All NLSR Releases
+=================
 
 .. toctree::
    :glob:
@@ -9,6 +9,12 @@ NLSR Versions
 
    release-notes/*
 
+* **NLSR version 0.7.0**
+  (:doc:`Release Notes <release-notes/release-notes-0.7.0>`, `Documentation <https://docs.named-data.net/NLSR/0.7.0/>`__)
+
+  `src (git) <https://github.com/named-data/NLSR/releases/tag/NLSR-0.7.0>`__,
+  `src (tarball) <https://named-data.net/downloads/nlsr-0.7.0.tar.xz>`__ (`checksum <https://named-data.net/downloads/nlsr-0.7.0.tar.xz.sha256>`__)
+
 * **NLSR version 0.6.0**
   (:doc:`Release Notes <release-notes/release-notes-0.6.0>`, `Documentation <https://docs.named-data.net/NLSR/0.6.0/>`__)
 

src/conf-parameter.hpp

@@ -1,6 +1,6 @@
 /* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
 /*
- * Copyright (c) 2014-2022,  The University of Memphis,
+ * Copyright (c) 2014-2023,  The University of Memphis,
  *                           Regents of the University of California,
  *                           Arizona Board of Regents.
  *
@@ -531,7 +531,7 @@ class ConfParameter
 
 PUBLIC_WITH_TESTS_ELSE_PRIVATE:
   // must be incremented when breaking changes are made to sync
-  static constexpr uint64_t SYNC_VERSION = 10;
+  static constexpr uint64_t SYNC_VERSION = 11;
 
   AdjacencyList m_adjl;
   NamePrefixList m_npl;

wscript

@@ -22,7 +22,7 @@ NLSR, e.g., in COPYING.md file.  If not, see <http://www.gnu.org/licenses/>.
 from waflib import Context, Logs, Utils
 import os, subprocess
 
-VERSION = '0.6.0'
+VERSION = '0.7.0'
 APPNAME = 'nlsr'
 GIT_TAG_PREFIX = 'NLSR-'