This gem is under heavy development! A lot of the below code may not work, and is certainly not guranteed to be reliable if it does! If you need to base a working project on this, I recommend going back to the
ruby-nxtgem this work is inspired by for the time being.
Control a Lego NXT 2.0 brick using Ruby code. This library works by piping commands over a Bluetooth or USB connection to the brick, allowing you to write Ruby scripts to control your NXT brick.
This project used to be based on "ruby-nxt", and Tony Buser's subsequent rewrite "nxt". It is now a complete rewrite, based heavily in some parts on the aforesaid projects internally, but with a brand new external API that should prove cleaner and easier to work with.
This code implements direct command, as outlined in "Appendix 2-LEGO MINDSTORMS NXT Direct Commands.pdf". Not all functionality is implemented yet!
Install the gem:
gem install lego-nxtAdd it as a Bundler dependency as you see fit!
In order to start coding with your NXT, you'll need to set up either a USB or Bluetooth connection to it. Follow one of the below sets of steps; if you go for a Bluetooth connection, you'll need to remember the /dev/* address you end up using, as you'll need to provide it when making a connection with this library.
Simply plug in the NXT, and that's it! This library will take care of enumerating the USB host devices to find the NXT device for you, no effort required on your behalf!
Make sure you have the bluez package installed, which should include the rfcomm and hcitool commands. We start by searching for the MAC address of our NXT:
$ hcitool scan
Scanning ...
90-8E-E0-C1-2A-7B NXTThen open the /etc/bluetooth/rfcomm.conf file and add an entry as follows:
rfcomm0 {
bind yes;
# Bluetooth address of the device
device 90-8E-E0-C1-2A-7B;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "NXT";
}
If you're on a distro which has a Bluetoth daemon running automatically, you can simply restart it. For Ubuntu, that will look something like:
$ sudo /etc/init.d/bluez-utilsOn other distros where you manage the Bluetooth daemon yourself, you'll need to do the bind calls yourself:
$ sudo rfcomm bind /dev/rfcomm0 '90-8E-E0-C1-2A-7B'After that, the Bluetooth connection should be established. Check that by running the rfcomm command with no arguments:
$ rfcomm
rfcomm0: 90-8E-E0-C1-2A-7B channel 1 cleanThe NXT should now be accessible from /dev/rfcomm0!
Turn on the NXT and make sure Bluetooth is turned on. Click the bluetooth icon in the menubar of your Mac and select "Setup bluetooth device". It will prompt you for a device type; choose "Any device". Select the NXT from the list and click continue.
The NXT will beep and ask for a passkey. Choose 1234 and press orange button. Enter the 1234 passcode on your Mac when promted. The NXT will beep again; press the orange button to use 1234 again.
Your Mac will then alert you that "There were no supported services found on your device". Ignore and click "Continue", followed by "Quit".
Now click the Bluetooth icon and select "Open bluetooth preferences"; you should see the NXT listed. Select it, then click "Edit Serial Ports".
It should show NXT-DevB-1; if not, click "Add", and use:
Port Name: NXT-DevB-1
Device Service: Dev B
Port type: RS-232
Click "Apply". The NXT should now be accessible from /dev/tty.NXT-DevB-1!
The NXT project has been heavily documented using nice, clean, human readable markdown. YARD is used to generated the docs, and the options have been included in our .yardopts file, so simply run a YARD server to read them:
$ yard serverThis documents the API, both internal and external. For bite-sized chunks of NXT code that is much more appropriate for beginners, have a look at the examples.
In addition to this, you might find the tests quite helpful. There are currently only RSpec unit tests, which can be found in the spec directory; the plan is to add some decent feature tests soon.
This project is licensed via MIT license.