Skip to content

Failed to connect to MotionBuilder [Troubleshooting]

Jump to bottom
Nils Söderman edited this page Oct 2, 2022 · 1 revision

Failed to connect to MotionBuilder.

image

Troubleshooting steps:

  1. Make sure MotionBuilder is running and is not minimized

  2. Go to Settings > Preferences... > Python and make sure "Enabled Server" is ticked:
    (MotionBuilder must be restarted after enabling this setting)

    Enabled Server Setting

  3. MotionBuilder's Python server will run on port 4242, make sure you don't have any other applications using this port.

Clone this wiki locally