Jammer

A configurable signal jamming tool for testing and development purposes. This project provides a simple CLI-based interface to simulate jamming behavior, useful for controlled testing environments. The jammer generates random noise over the given central frequency and bandwidth. You can change the config parameters in the config file (basic_jammer.yaml).

---

Building the Jammer (Linux CLI)

Follow the steps below to build and run the jammer on a Linux-based command line interface.

1. Clone the Repository

git clone https://www.github.com/oran-testing/jammer.git
cd jammer

2. Build the Project

mkdir build
cd build
cmake ..
make -j

Note: Ensure that cmake and make are installed on your system. You may also need a C++ compiler (e.g., g++).

---

Running the Jammer

After successfully building the project, you can run the jammer using a configuration file.

./jammer --config ../configs/basic_jammer.yaml

Configuration

• The jammer uses YAML configuration files to define parameters such as central frequency, bandwidth, gain, etc.
• You can modify the parameters in configs/basic_jammer.yaml to suit your specific use case.

---

Directory Structure

jammer/
├── configs/
│   └── basic_jammer.yaml
├── src/
├── build/
└── README.md

---

Requirements

• Linux-based OS
• CMake (version 3.10 or higher recommended)
• Make
• C++ compiler (GCC or Clang)

To install the necessary tools on Ubuntu/Debian:

sudo apt update
sudo apt install build-essential cmake

---

License

This project is licensed under the MIT License.

---

Contact

For questions or contributions, feel free to open an issue or submit a pull request.