v1.1.7.1 #11
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: publish release assets | |
| on: | |
| release: | |
| types: [published] | |
| jobs: | |
| checks: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| persist-credentials: false | |
| - name: verify changelogs | |
| run: | | |
| VERSION=$(awk '/static const char version/ { gsub(/[\";]/, "", $6); print $6; exit }' ttyrec.c) | |
| if ! head -n1 debian/changelog | grep -F "ovh-ttyrec ($VERSION) master"; then | |
| echo "inconsistency between version ($VERSION) and debian changelog:" | |
| head -n1 debian/changelog | |
| exit 1 | |
| fi | |
| if ! grep -F " $VERSION" ovh-ttyrec.spec; then | |
| echo "inconsistency between version ($VERSION) and rpm changelog:" | |
| exit 1 | |
| fi | |
| - name: install prerequisites | |
| run: sudo apt-get update && sudo apt-get install -y uncrustify make git gcc | |
| - name: check style | |
| run: | | |
| ./configure | |
| make style | |
| git diff | |
| if ! git diff --quiet; then | |
| echo "Please make style." | |
| exit 1 | |
| fi | |
| - name: compile with zstd autodetection (none) | |
| run: | | |
| sudo apt-get remove --purge -y libzstd-dev | |
| make clean && ./configure && make -j$(nproc) && ./ttyrec -V | |
| if ./ttyrec -V | grep -qF 'zstd'; then | |
| exit 1 | |
| fi | |
| - name: compile with zstd autodetection (static) | |
| run: | | |
| sudo apt-get install -y libzstd-dev | |
| make clean && ./configure && make -j$(nproc) && ./ttyrec -V | |
| ./ttyrec -V | grep -qF 'zstd[static]' | |
| - name: compile with shared libzstd | |
| run: | | |
| make clean && NO_STATIC_ZSTD=1 ./configure && make -j$(nproc) && ./ttyrec -V | |
| if ./ttyrec -V | grep -qF 'zstd[static]'; then | |
| exit 1 | |
| fi | |
| ./ttyrec -V | grep -qF 'zstd' | |
| - name: compile without zstd support | |
| run: | | |
| make clean && NO_ZSTD=1 ./configure && make -j$(nproc) && ./ttyrec -V | |
| if ./ttyrec -V | grep -qF 'zstd'; then | |
| exit 1 | |
| fi | |
| - name: compile fully static version | |
| run: | | |
| make clean && STATIC=1 ./configure && make -j$(nproc) && ./ttyrec -V | |
| ./ttyrec -V | grep -qF 'zstd[static]' | |
| if ldd ttyrec; then | |
| exit 1 | |
| fi | |
| multiarch: | |
| needs: checks | |
| runs-on: ubuntu-latest | |
| strategy: | |
| matrix: | |
| cross: | |
| - arm32v5 | |
| - arm32v7 | |
| - arm64v8 | |
| - ppc64le | |
| - mips64le | |
| - s390x | |
| - i386 | |
| - amd64 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| persist-credentials: false | |
| - name: prepare qemu | |
| run: docker run --rm --privileged multiarch/qemu-user-static --reset -p yes | |
| - name: install prerequisites | |
| run: sudo apt-get update && sudo apt-get install -y rsync zip | |
| - name: create source zip file for rpm build | |
| run: | | |
| curdir=$PWD | |
| tempfolder=$(mktemp -d) | |
| cd $tempfolder | |
| mkdir ovh-ttyrec | |
| rsync -va --exclude=.git $curdir/ ovh-ttyrec/ | |
| mkdir -p ~/rpmbuild/SOURCES | |
| zip -9r ~/rpmbuild/SOURCES/master.zip ovh-ttyrec | |
| - name: build for ${{ matrix.cross }} | |
| run: > | |
| mkdir /tmp/pkg && | |
| docker run --rm -e DEBIAN_FRONTEND=noninteractive | |
| -v $PWD:/pkg/code | |
| -v /tmp/pkg:/pkg | |
| -v $HOME:/root | |
| ${{ matrix.cross }}/debian:10 | |
| /bin/bash -c ' | |
| set -exo pipefail; | |
| apt-get update; | |
| apt-get install -y make gcc libzstd-dev dpkg-dev debhelper unzip rpm binutils; | |
| cd /pkg/code; | |
| dpkg-buildpackage -b -rfakeroot -us -uc; | |
| if [ "${{ matrix.cross }}" = i386 ]; then target="--target=i386"; else target=""; fi | |
| set +o pipefail; | |
| rpm --showrc | head; | |
| set -o pipefail; | |
| if [ $(rpm -E "%{_arch}") != "%{_arch}" ]; then | |
| rpmbuild -bb $target ovh-ttyrec.spec; | |
| else | |
| arch=$(rpm --showrc | grep "^build arch" | awk "{print \$4}"); | |
| rpmbuild --define "_arch $arch" -bb $target ovh-ttyrec.spec; | |
| fi; | |
| mv ~/rpmbuild/RPMS/*/*.rpm /pkg; | |
| STATIC=1 ./configure && make clean && make -j$(nproc) && ./ttyrec -V; | |
| ./ttyrec -V | grep -qF "zstd[static]"; | |
| if ldd ttyrec; then | |
| exit 1; | |
| fi; | |
| version=$(./ttyrec -V | head -n1 | cut -d" " -f2 | grep -Eo "[0-9][A-Za-z0-9._-]+"); | |
| mkdir ovh-ttyrec-$version; | |
| strip ttyrec ttyplay ttytime; | |
| install ttyrec ttyplay ttytime ovh-ttyrec-$version; | |
| cp -va docs ovh-ttyrec-$version; | |
| staticname=ovh-ttyrec-${version}_$(dpkg --print-architecture)-linux-static-binary.tar.gz; | |
| tar cvzf /pkg/$staticname ovh-ttyrec-$version; | |
| ' | |
| - name: get release vars | |
| id: getvars | |
| run: | | |
| rpmpath=$(find /tmp/pkg -mindepth 1 -maxdepth 1 -type f -name "*.rpm") | |
| rpmname=$(basename "$rpmpath") | |
| echo "RPM package name is $rpmname ($rpmpath)" | |
| echo "::set-output name=rpmname::$rpmname" | |
| echo "::set-output name=rpmpath::$rpmpath" | |
| debpath=$(find /tmp/pkg -mindepth 1 -maxdepth 1 -type f -name "*.deb" ! -name "*dbgsym*") | |
| debname=$(basename "$debpath") | |
| echo "Debian package name is $debname ($debpath)" | |
| echo "::set-output name=debname::$debname" | |
| echo "::set-output name=debpath::$debpath" | |
| staticpath=$(find /tmp/pkg -mindepth 1 -maxdepth 1 -type f -name "*-linux-static-binary.tar.gz" | head -n1) | |
| staticname=$(basename "$staticpath") | |
| echo "Static tar.gz archive name is $staticname ($staticpath)" | |
| echo "::set-output name=staticname::$staticname" | |
| echo "::set-output name=staticpath::$staticpath" | |
| - name: upload rpm package | |
| uses: actions/upload-release-asset@v1 | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| with: | |
| upload_url: ${{ github.event.release.upload_url }} | |
| asset_path: ${{ steps.getvars.outputs.rpmpath }} | |
| asset_name: ${{ steps.getvars.outputs.rpmname }} | |
| asset_content_type: application/x-rpm | |
| - name: upload debian package | |
| uses: actions/upload-release-asset@v1 | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| with: | |
| upload_url: ${{ github.event.release.upload_url }} | |
| asset_path: ${{ steps.getvars.outputs.debpath }} | |
| asset_name: ${{ steps.getvars.outputs.debname }} | |
| asset_content_type: application/x-debian-package | |
| - name: upload static binary | |
| uses: actions/upload-release-asset@v1 | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| with: | |
| upload_url: ${{ github.event.release.upload_url }} | |
| asset_path: ${{ steps.getvars.outputs.staticpath }} | |
| asset_name: ${{ steps.getvars.outputs.staticname }} | |
| asset_content_type: application/gzip | |
| freebsd: | |
| needs: checks | |
| runs-on: macos-latest | |
| name: FreeBSD | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| persist-credentials: false | |
| - name: Build for FreeBSD | |
| id: build | |
| uses: vmactions/freebsd-vm@v0 | |
| with: | |
| usesh: true | |
| sync: sshfs | |
| run: | | |
| set -ex | |
| freebsd-version | |
| pkg install -y gmake zstd | |
| STATIC=1 ./configure | |
| gmake | |
| ./ttyrec -V | |
| ./ttyrec -V | grep -qF "zstd[static]" | |
| file ttyrec | grep -qF "statically" | |
| version=$(./ttyrec -V | head -n1 | cut -d" " -f2 | grep -Eo "[0-9][A-Za-z0-9._-]+") | |
| mkdir ovh-ttyrec-$version | |
| strip ttyrec ttyplay ttytime | |
| install ttyrec ttyplay ttytime ovh-ttyrec-$version | |
| cp -va docs ovh-ttyrec-$version | |
| staticname=ovh-ttyrec-${version}_$(uname -m)-freebsd-static-binary.tar.gz | |
| tar cvzf $staticname ovh-ttyrec-$version | |
| echo "Static tar.gz archive name is $staticname" | |
| echo "::set-output name=staticname::$staticname" | |
| - name: upload static binary | |
| uses: actions/upload-release-asset@v1 | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| with: | |
| upload_url: ${{ github.event.release.upload_url }} | |
| asset_path: ${{ steps.build.outputs.staticname }} | |
| asset_name: ${{ steps.build.outputs.staticname }} | |
| asset_content_type: application/gzip |