Skip to content

pantaluna/esp32_bmp280_sensor_using_lib

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Project Description

This project demonstrates the basics of using the MJD component "mjd_bmp280" for the popular Bosch BMP280 meteo sensor.

Use it to get insights in how to use this component.

Goto the component "components/mjd_bmp280" for installation and usage/wiring instructions, data sheets, FAQ, photo's, etc. for the hardware and software.

What are the HW SW requirements of the ESP32 MJD Starter Kit?

Hardware

  • A decent ESP development board. I suggest to buy a popular development board with good technical documentation and a significant user base. Examples: Adafruit HUZZAH32, Espressif ESP32-DevKitC, Pycom WiPy, Wemos D32.
  • The peripherals that are used in the project. @tip The README of each component contains a section "Shop Products". @example A Bosch BME280 meteo sensor breakout board.

Software: ESP-IDF v3.2

mkdir ~/esp
cd    ~/esp
git clone -b v3.2 --recursive https://github.com/espressif/esp-idf.git esp-idf-v3.2

Running the example

  • Run make menuconfig and modify for example the GPIO PIN# that you want to use.
  • Run make flash monitor to build and upload the example to your board and connect to its serial terminal.

Reference: the ESP32 MJD Starter Kit SDK

Do you also want to create innovative IoT projects that use the ESP32 chip, or ESP32-based modules, of the popular company Espressif? Well, I did and still do. And I hope you do too.

The objective of this well documented Starter Kit is to accelerate the development of your IoT projects for ESP32 hardware using the ESP-IDF framework from Espressif and get inspired what kind of apps you can build for ESP32 using various hardware modules.

Go to https://github.com/pantaluna/esp32-mjd-starter-kit