SparkFun Line Follower Array (SEN-13582)
The Sensor Bar takes an 8 bit reading of reflectance for use with following lines or reading dark/light patterns. The bar can see from about 1/4 to 3/4 inches away. IR illumination power can be adjusted with the on-board potentiometer. Illumination can be turned on and off with software to conserve power, or left on all the time for faster readings.
- /Documentation - Data sheets, additional product information
- /Hardware - Eagle design files (.brd, .sch)
- /Libraries - Libraries for use with the RedBot Line Follower Sensor Bar
- /Production - Production panel files (.brd)
- Library - Arduino library for the array.
- Hookup Guide - Basic hookup guide for the array.
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact techsupport@sparkfun.com.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.