hal/imxrt106x: init enet PLL #1470
GitHub Actions / Unit Test Results
failed
Oct 3, 2024 in 0s
3 fail, 698 skipped, 6 819 pass in 37m 23s
Annotations
Check warning on line 0 in phoenix-rtos-tests/libc/printf
github-actions / Unit Test Results
armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/printf (phoenix-rtos-tests/libc/printf) failed
junit.xml [took 0s]
Raw output
PLO ERROR: Failed to go into bootloader mode
PLO ERROR: Failed to go into bootloader mode
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3b40038
hal: Cortex-M i.MX RT106x
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/uart: Initializing uart(0.2)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Initialized flexspi1
dev/flash/nor: Probing flash id 0x00000000 on port 1.0
dev/flash: Initialized flexspi2
dev/flash/nor: Probing flash id 0x001640ef on port 2.0
dev/flash/nor: Configured Winbond W25Q32 4MB nor flash(2.1)
dev/pipe: Initialized rtt channel(8.0)
cmd: Executing pre-init script
Check warning on line 0 in phoenix-rtos-tests/libc/stdlib
github-actions / Unit Test Results
armv7m7-imxrt106x-evk:phoenix-rtos-tests/libc/stdlib (phoenix-rtos-tests/libc/stdlib) failed
junit.xml [took 0s]
Raw output
PLO ERROR: Failed to go into bootloader mode
PLO ERROR: Failed to go into bootloader mode
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3b40038
hal: Cortex-M i.MX RT106x
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/uart: Initializing uart(0.2)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Initialized flexspi1
dev/flash/nor: Probing flash id 0x00000000 on port 1.0
dev/flash: Initialized flexspi2
dev/flash/nor: Probing flash id 0x001640ef on port 2.0
dev/flash/nor: Configured Winbond W25Q32 4MB nor flash(2.1)
dev/pipe: Initialized rtt channel(8.0)
cmd: Executing pre-init script
Check warning on line 0 in phoenix-rtos-tests/setjmp/unit
github-actions / Unit Test Results
armv7m7-imxrt106x-evk:phoenix-rtos-tests/setjmp/unit (phoenix-rtos-tests/setjmp/unit) failed
junit.xml [took 0s]
Raw output
PLO ERROR: Failed to go into bootloader mode
PLO ERROR: Failed to go into bootloader mode
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3b40038
hal: Cortex-M i.MX RT106x
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/uart: Initializing uart(0.2)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Initialized flexspi1
dev/flash/nor: Probing flash id 0x00000000 on port 1.0
dev/flash: Initialized flexspi2
dev/flash/nor: Probing flash id 0x001640ef on port 2.0
dev/flash/nor: Configured Winbond W25Q32 4MB nor flash(2.1)
dev/pipe: Initialized rtt channel(8.0)
cmd: Executing pre-init script
Loading