v2023.02
meta-polarfire-soc-yocto-bsp v2023.02
Pre-built images for the Icicle Kit Reference Design
Pre-built images of this release targeted at the 2023.02 Icicle Kit Reference Design are available from this release's assets:
-
eMMC/SD card Linux images:
-
QSPI Flash Linux images:
- The core-image-minimal-dev-mtdutils-icicle-kit-es.nand.mtdimg image can be flashed to an external Winbond W25N01GV flash memory
- The core-image-minimal-dev-mtdutils-icicle-kit-es.nor.mtdimg image can flashed to an external Micron MT25QL256 flash memory
For more information, please refer to the Booting from QSPI documentation.
Changes since last release (v2022.11)
The main change in this release is the introduction of non-coherent DMA support on the Icicle Kit. This release depends on updates to the Icicle kit memory map, and is not compatible with version v2022.11 or earlier of the Icicle Kit Reference Design.
Starting from this release, the PolarFire SoC Yocto BSP manifests will reside in the polarfire-soc-yocto-manifest repository. This means that the instructions to download the BSP using the repo command have changed slightly. For more information please refer to the "Build Instructions" section in the PolarFire SoC README.
- examples: bump polarfire-soc-linux-examples to v2023.02
- examples: amp: bump polarfire-soc-amp-examples to v2023.02
- linux: bump to v2023.02
- u-boot: bump to version v2023.02
- icicle-kit: update u-boot, dtb and initrd entry points/load addresses to 32-bit memory
- icicle-kit: enable non-coherent DMA support
- mpfs-video-kit: Rename all references of "PolarFire SoC sev kit" to "PolarFire SoC Video Kit"
This release has been tested to work on the Icicle Kit, from eMMC, SD card, an external Winbond W25N01GV QSPI NAND flash and an external Micron MT25QL256 NOR flash memory using HSS 0.99.35 and the Icicle Kit Reference Design tag v2023.02