This project provides the powercap library -- a generic C interface to the Linux power capping framework (sysfs interface).
It also provides the following applications:
powercap-info- view powercap control type hierarchies or zone/constraint-specific configurationspowercap-set- set powercap control type zone/constraint-specific configurations
The aforementioned library and applications should be compatible with all Linux powercap drivers. The library also includes an API, originally created for use with RAPLCap, specifically for managing Intel Running Average Power Limit (RAPL).
If using this project for other scientific works or publications, please reference:
-
Connor Imes, Huazhe Zhang, Kevin Zhao, Henry Hoffmann. "CoPPer: Soft Real-time Application Performance Using Hardware Power Capping". In: IEEE International Conference on Autonomic Computing (ICAC). 2019. DOI: https://doi.org/10.1109/ICAC.2019.00015
BibTex
@inproceedings{imes2019copper, author={Imes, Connor and Zhang, Huazhe and Zhao, Kevin and Hoffmann, Henry}, booktitle={2019 IEEE International Conference on Autonomic Computing (ICAC)}, title={{CoPPer}: Soft Real-Time Application Performance Using Hardware Power Capping}, year={2019}, pages={31-41}, doi={10.1109/ICAC.2019.00015} }
The Linux power capping framework was released with Linux kernel 3.13.
You must be running this kernel or newer with the configs CONFIG_POWERCAP and CONFIG_INTEL_RAPL enabled to use the Intel RAPL driver.
To use the intel-rapl control type, ensure that the appropriate kernel module is loaded.
Run with proper privileges:
modprobe intel_rapl_msrOr on kernels older than 5.3:
modprobe intel_raplModern hardware is constrained by power and temperature limitations, often quantified as Thermal Design Power.
In processors and other clock-driven hardware components, power consumption P is proportional to capacitance C, the square of the voltage V, and clock frequency f: P ~ C * V^2 * f.
A popular mechanism for balancing performance and power consumption is Dynamic Voltage and Frequency Scaling (DVFS).
For compute-bound applications, DVFS provides a linear relationship between frequency and performance.
However, power is non-linear with frequency since an increase in frequency also requires an increase in voltage.
Although the relationship between performance and power is more difficult to model, hardware can be better at optimizing voltage and frequency than software while still respecting a power cap over a time window. Power capping allows a system administrator to configure an upper limit on the power consumption of various hardware components while letting the hardware more efficiently manage voltage and frequency. Setting a power cap does NOT imply that the component will actually consume that power, only that it will not violate that limit on average over the specified time window.
See the man pages or run the applications with the -h or --help option for instructions.
First, there is the powercap-sysfs.h interface for reading/writing to sysfs without the need to maintain state.
This is reasonable for simple use cases.
See the header files for documentation.
The powercap.h interface provides read/write functions for generic powercap zone and constraint file sets.
Users are responsible for managing memory and populating the structs with file descriptors (e.g., code that wrap this interface performs zone/constraint discovery and file descriptor management).
The powercap-rapl.h interface discovers RAPL instances, power zones, and constraints (i.e., long_term and short_term constraints).
Users are responsible for managing memory, but the library will manage discovering, opening, and closing files within instances.
Basic lifecycle example:
// get number of top-level (parent) RAPL instances
uint32_t count = powercap_rapl_get_num_instances();
if (count == 0) {
// none found (maybe the kernel module isn't loaded?)
perror("powercap_rapl_get_num_instances")
return -1;
}
powercap_rapl_pkg* pkgs = malloc(count * sizeof(powercap_rapl_pkg));
// initialize
uint32_t i;
for (i = 0; i < count; i++) {
if (powercap_rapl_init(i, &pkgs[i], 0)) {
// could be that you don't have write privileges
perror("powercap_rapl_init");
return -1;
}
}
// do a bunch of stuff with the interface here,
// e.g., enable desired zones and get/set power caps...
// now cleanup
for (i = 0; i < count; i++) {
if (powercap_rapl_destroy(&pkgs[i])) {
perror("powercap_rapl_destroy");
}
}
free(pkgs);The interfaces do NOT guarantee that values are actually accepted by the kernel, they only notice errors if I/O operations fail. It is recommended that, at least during development/debugging, users read back to see if their write operations were successful.
Additionally, the kernel sysfs bindings (and thus the powercap-rapl interface) do NOT guarantee that RAPL instances are presented in any particular order.
For example, the first instance (sysfs directory intel-rapl:0) on a dual-socket system may actually provide access to package-1 instead of package-0, and vice versa.
In cases where order matters, e.g., when sockets are managed asymmetrically, the user is responsible for ensuring that the correct powercap instance is being operated on, e.g., by checking its name with powercap_rapl_get_name(...).
More concretely, in the example above, powercap_rapl_get_name(&pkgs[0], POWERCAP_RAPL_ZONE_PACKAGE, ...) gives name package-1, and powercap_rapl_get_name(&pkgs[1], POWERCAP_RAPL_ZONE_PACKAGE, ...) is package-0.
It might be helpful to sort the pkgs array after initialization (see the powercap implementation of RAPLCap for an example).
Finally, the powercap-rapl interface exposes functions for files that are not (currently) supported by RAPL in order to be compliant with the powercap interface.
Use the powercap_rapl_is_zone_file_supported(...) and powercap_rapl_is_constraint_file_supported(...) functions to check in advance if you are unsure if a zone or constraint file is supported.
Furthermore, files may exist but always return an error code for some zones or constraints, e.g., the constraint max_power_uw file (powercap_rapl_get_max_power_uw(...)) for zones other than POWERCAP_RAPL_ZONE_PACKAGE.
This project uses CMake.
To build, run:
mkdir _build
cd _build
cmake ..
makeTo create a shared object library as a release build, specify for cmake:
cmake .. -DBUILD_SHARED_LIBS=On -DCMAKE_BUILD_TYPE=ReleaseTo install, run with proper privileges:
make installOn Linux, installation typically places libraries in /usr/local/lib and
header files in /usr/local/include.
Install must be run before uninstalling in order to have a manifest. To uninstall, run with proper privileges:
make uninstallTo cross-compile for different systems/architectures, use standard CMake toolchain files. See Mastering CMake for reference.
For example, modify the cmake command from the build directory to use your own toolchain.cmake file:
cmake -DCMAKE_TOOLCHAIN_FILE=/path/to/toolchain.cmake ..Find this and related project sources at the powercap organization on GitHub.
This project originates at: https://github.com/powercap/powercap
Bug reports and pull requests for bug fixes and enhancements are welcome.
This project is developed by Connor Imes. It is released under the 3-Clause BSD License.
Special thanks to Henry Hoffmann (University of Chicago) and Steven Hofmeyr (Lawrence Berkeley National Laboratory) for advising and supporting projects that this code was originally developed for.