rules: copy 40-redhat.rules from RHEL 9

Also split rules into 40-redhat-hotplug.rules, 40-redhat-s390.rules and 40-redhat.rules.

rhel-only: feature

Resolves: RHEL-40360

rules.d/40-redhat-hotplug.rules

@@ -0,0 +1,23 @@
+# do not edit this file, it will be overwritten on update
+
+# CPU hotadd request
+SUBSYSTEM!="cpu", GOTO="cpu_online_end"
+ACTION!="add", GOTO="cpu_online_end"
+CONST{arch}=="ppc64*", GOTO="cpu_online_end"
+CONST{arch}=="s390*", ATTR{configure}=="0", GOTO="cpu_online_end"
+
+TEST=="online", ATTR{online}=="0", ATTR{online}="1"
+
+LABEL="cpu_online_end"
+
+# Memory hotadd request
+SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
+ACTION!="add", GOTO="memory_hotplug_end"
+CONST{arch}=="s390*", GOTO="memory_hotplug_end"
+CONST{arch}=="ppc64*", GOTO="memory_hotplug_end"
+
+ENV{.state}="online"
+CONST{virt}=="none", ENV{.state}="online_movable"
+ATTR{state}=="offline", ATTR{state}="$env{.state}"
+
+LABEL="memory_hotplug_end"

rules.d/40-redhat-s390.rules

@@ -0,0 +1,24 @@
+# do not edit this file, it will be overwritten on update
+
+# Rule for prandom character device node permissions
+KERNEL=="prandom", MODE="0644"
+
+# Rules for creating the ID_PATH for SCSI devices based on the CCW bus
+# using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN>
+#
+ACTION=="remove", GOTO="zfcp_scsi_device_end"
+
+#
+# Set environment variable "ID_ZFCP_BUS" to "1" if the devices
+# (both disk and partition) are SCSI devices based on FCP devices
+#
+KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1"
+
+# For SCSI disks
+KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}"
+
+
+# For partitions on a SCSI disk
+KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n"
+
+LABEL="zfcp_scsi_device_end"

rules.d/40-redhat.rules

@@ -0,0 +1,8 @@
+# do not edit this file, it will be overwritten on update
+
+# reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded
+ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge"
+
+# load SCSI generic (sg) driver
+SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
+SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"

rules.d/meson.build

@@ -5,7 +5,10 @@ install_data(
         install_dir : udevrulesdir)
 
 rules = [
-        [files('60-autosuspend.rules',
+        [files('40-redhat-hotplug.rules',
+               '40-redhat-s390.rules',
+               '40-redhat.rules',
+               '60-autosuspend.rules',
                '60-block.rules',
                '60-cdrom_id.rules',
                '60-dmi-id.rules',