remove outdated input file generisdata_nur_ren.prn

core/datainput.gms

@@ -569,9 +569,6 @@ $endif
 fm_dataemiglob(enty,enty2,te,"co2")$pe2se(enty,enty2,te)       = 1/s_zj_2_twa * fm_dataemiglob(enty,enty2,te,"co2");
 fm_dataemiglob(enty,enty2,te,"cco2")                           = 1/s_zj_2_twa * fm_dataemiglob(enty,enty2,te,"cco2");
 
-table f_datarenglob(char,rlf,*)                    "global nur and ren data"
-$include "./core/input/generisdata_nur_ren.prn"
-;
 table f_dataetaglob(tall,all_te)                      "global eta data"
 $include "./core/input/generisdata_varying_eta.prn"
 ;
@@ -961,8 +958,11 @@ $if %cm_MAgPIE_coupling% == "on" p_efFossilFuelExtr(regi,"pebiolc","n2obio") = 0
 
 display p_efFossilFuelExtr;
 
-pm_dataren(regi,"nur",rlf,te)     = f_datarenglob("nur",rlf,te);
-pm_dataren(regi,"maxprod",rlf,te) = sm_EJ_2_TWa * f_datarenglob("maxprod",rlf,te);
+*** capacity factors (nur) are 1 by default
+pm_dataren(regi,"nur",rlf,te)     = 1;
+
+*** value copied from old file generisdata_nur_ren.prn (50EJ = 1.5855TWa)
+pm_dataren(regi,"maxprod","1","geohe") = 1.5855; 
 
 *RP* hydro, spv and csp get maxprod for all regions and grades from external file
 table f_maxProdGradeRegiHydro(all_regi,char,rlf)                  "input of regionalized maximum from hydro [EJ/a]"
@@ -1014,12 +1014,18 @@ $ondelim
 $include "./core/input/f_dataRegiSolar.cs3r"
 $offdelim
 ;
-pm_dataren(all_regi,"maxprod",rlf,"csp")    = sm_EJ_2_TWa * f_dataRegiSolar(all_regi,"maxprod","csp",rlf);
-pm_dataren(all_regi,"maxprod",rlf,"spv")    = sm_EJ_2_TWa * f_dataRegiSolar(all_regi,"maxprod","spv",rlf);
-pm_dataren(all_regi,"nur",rlf,"csp")        = f_dataRegiSolar(all_regi,"nur","csp",rlf);
-pm_dataren(all_regi,"nur",rlf,"spv")        = f_dataRegiSolar(all_regi,"nur","spv",rlf);
+pm_dataren(all_regi,"maxprod",rlf,"csp")      = sm_EJ_2_TWa * f_dataRegiSolar(all_regi,"maxprod","csp",rlf);
+pm_dataren(all_regi,"maxprod",rlf,"spv")      = sm_EJ_2_TWa * f_dataRegiSolar(all_regi,"maxprod","spv",rlf);
+pm_dataren(all_regi,"nur",rlf,"spv")          = f_dataRegiSolar(all_regi,"nur","spv",rlf);
 p_datapot(all_regi,"limitGeopot",rlf,"pesol") = f_dataRegiSolar(all_regi,"limitGeopot","spv",rlf);
-pm_data(all_regi,"luse","spv")              = f_dataRegiSolar(all_regi,"luse","spv","1")/1000;
+pm_data(all_regi,"luse","spv")                = 0.001 * f_dataRegiSolar(all_regi,"luse","spv","1");
+
+*** RP: rescale CSP capacity factors in REMIND
+*** In the DLR resource data input files, the numbers are based on a SM3/12h setup,
+*** while the cost data from IEA seems rather based on a SM2/6h setup (with 40% average CF).
+*** Accordingly, decrease CF in REMIND to 2/3 of the DLR values (no need to correct maxprod,
+*** as here no miscalculation of total energy yield takes place, in contrast to wind)
+pm_dataren(all_regi,"nur",rlf,"csp")          = 2/3 * f_dataRegiSolar(all_regi,"nur","csp",rlf);
 
 
 table f_maxProdGeothermal(all_regi,char)                  "input of regionalized maximum from geothermal [EJ/a]"
@@ -1034,10 +1040,6 @@ pm_dataren(all_regi,"maxprod","1","geohdr")$f_maxProdGeothermal(all_regi,"maxpro
 *** FS: temporary fix: set minimum geothermal potential across all regions to 10 PJ (still negligible even in small regions) to get rid of infeasibilities
 pm_dataren(all_regi,"maxprod","1","geohdr")$(f_maxProdGeothermal(all_regi,"maxprod") <= 0.01) = sm_EJ_2_TWa * 0.01;
 
-
-*mh* set 'nur' for all non renewable technologies to '1':
-pm_dataren(regi,"nur",rlf,teNoRe)    = 1;
-
 display p_datapot, pm_dataren;
 
 ***---------------------------------------------------------------------------
@@ -1127,11 +1129,6 @@ pm_cf("2015",regi,"spv") = pm_cf("2015",regi,"spv") * p_aux_capacityFactorHistOv
 pm_cf("2020",regi,"spv") = pm_cf("2020",regi,"spv") * (p_aux_capacityFactorHistOverREMIND(regi,"spv")+1)/2;
 pm_cf("2025",regi,"spv") = pm_cf("2025",regi,"spv") * (p_aux_capacityFactorHistOverREMIND(regi,"spv")+3)/4;
 
-*** RP rescale CSP capacity factors in REMIND - in the DLR resource data input files, the numbers are based on a SM3/12h setup, while the cost data from IEA seems rather based on a SM2/6h setup (with 40% average CF)
-*** Accordingly, decrease CF in REMIND to 2/3 of the DLR values (no need to correct maxprod, as here no miscalculation of total energy yield takes place, in contrast to wind)
-loop(te$sameas(te,"csp"),
-  pm_dataren(regi,"nur",rlf,te)     = pm_dataren(regi,"nur",rlf,te)     * 2/3 ;
-);
 
 display p_aux_capacityFactorHistOverREMIND, pm_dataren;
 

modules/32_power/IntC/equations.gms

@@ -56,8 +56,9 @@ q32_usableSeTe(t,regi,entySe,te)$(sameas(entySe,"seel") AND teVRE(te))..
 ***---------------------------------------------------------------------------
 *' Definition of capacity constraints for storage:
 ***---------------------------------------------------------------------------
-*' This equation calculates the storage cpacity for each testor that needs to be installed based on the amount of v32_storloss that is calculated below in 
-*' q32_storloss. Multiplying v32_storloss with "eta/(1-eta)" yields the total output of a storage technology; this output has to be smaller than cap * capfac.  
+*' This equation calculates the storage cpacity for each teStor that needs to be installed based on the amount of
+*' v32_storloss that is calculated below in q32_storloss. Multiplying v32_storloss with "eta/(1-eta)" yields
+*' the total output of a storage technology; this output has to be smaller than cap * capfac.  
 q32_limitCapTeStor(t,regi,teStor)$( t.val ge 2020 ) ..
     ( 0.5$( cm_VRE_supply_assumptions eq 1 )   !! reduce storage investment needs by half for VRE_supply_assumptions = 1 
     + 1$(   cm_VRE_supply_assumptions ne 1 )
@@ -68,39 +69,37 @@ q32_limitCapTeStor(t,regi,teStor)$( t.val ge 2020 ) ..
   =l=
   sum(te2rlf(teStor,rlf),
     vm_capFac(t,regi,teStor)
-  * pm_dataren(regi,"nur",rlf,teStor)
   * vm_cap(t,regi,teStor,rlf)
   )
 ;
 
 
-*** H2 storage implementation: Storage technologies (storspv, storwind etc.) also
-*** represent H2 storage. This is implemented by scaling up capacities of 
-*** H2 turbines (h2turbVRE, seh2 -> seel) with VRE capacities which require storage (according to q32_limitCapTeStor). 
+*** H2 storage implementation:
+*** Storage technologies (storspv, storwind etc.) also represent H2 storage.
+*** This is implemented by scaling up capacities of H2 turbines (h2turbVRE, seh2 -> seel)
+*** with VRE capacities which require storage (according to q32_limitCapTeStor). 
 *** These H2 turbines (h2turbVRE) do not have capital cost. Their cost are already considered in storage technologies.
-*** H2 turbines do not need be built if sufficient gas turbines (ngt) are available to provide flexibility. 
-*' Require a certain capacity  of either hydrogen or gas turbines as peaking backup capacity. The driver is the testor capacity, which in turn is determined by v32_storloss 
+*** H2 turbines are not needed if sufficient gas turbines (ngt) are available to provide flexibility. 
+*' Require a certain capacity of either hydrogen or gas turbines as peaking backup capacity. The driver is the teStor capacity, which in turn is determined by v32_storloss 
 q32_h2turbVREcapfromTestor(t,regi)..
   vm_cap(t,regi,"h2turbVRE","1")
   + vm_cap(t,regi,"ngt","1")
   =g=
-  sum(teStor, 
-    p32_storageCap(teStor,"h2turbVREcapratio") * vm_cap(t,regi,teStor,"1") )
+  sum(teStor, p32_storageCap(teStor,"h2turbVREcapratio") * vm_cap(t,regi,teStor,"1") )
 ;
 
 *** h2turbVRE hydrogen turbines should only be built in conjunction with storage capacities and not on its own
 q32_h2turbVREcapfromTestorUp(t,regi)..
   vm_cap(t,regi,"h2turbVRE","1")
   =l=
-  sum(te$teStor(te), 
-      p32_storageCap(te,"h2turbVREcapratio") * vm_cap(t,regi,te,"1") )
+  sum(teStor, p32_storageCap(teStor,"h2turbVREcapratio") * vm_cap(t,regi,teStor,"1") )
 ;
 
 *** build additional electrolysis capacities with stored VRE electricity, phase-in from 2030 to 2040
 q32_elh2VREcapfromTestor(t,regi)..
   vm_cap(t,regi,"elh2","1")
   =g=
-  sum(te$teStor(te), p32_storageCap(te,"elh2VREcapratio") * vm_cap(t,regi,te,"1") ) * p32_phaseInElh2VREcap(t)
+  sum(teStor, p32_storageCap(teStor,"elh2VREcapratio") * vm_cap(t,regi,teStor,"1") ) * p32_phaseInElh2VREcap(t)
 ;
 
 
@@ -165,7 +164,7 @@ q32_shStor(t,regi,teVRE)$(t.val ge 2015)..
 *' as it drives storage investments and thus the additional costs seen by VRE. It depends linearly on the usableSE output from this VRE, and linearly on the 
 *' SPECIFIC integration challenges, which in turn are mainly the adjusted share of the technology itself (v32_shSTor), but also increase when the total VRE share 
 *' increases beyond a (time-dependent) threshold.
-*' The term "(1-eta)/eta" is equal to the ratio "losses of a testor" to "output of a testor". 
+*' The term "(1-eta)/eta" is equal to the ratio "losses of a teStor" to "output of a teStor". 
 *' An example: If the specific integration challenges (v32_shStor + p32_Fact * v32_shAddInt) of eg. PV would reach 100%, then ALL the usable output of PV 
 *' would have to be "stabilized" by going through storsp, so the total storage losses & curtailment would exactly represent the (1-eta) values of storspv. When
 *' the specific integration challenge term () is below 100%, the required storage and resulting losses are scaled down accordingly.