update CHANGELOG

CHANGELOG.md

@@ -4,22 +4,22 @@ All notable changes to this project will be documented in this file.
 
 This project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html).
 
-### [Unreleased]
+## [Unreleased]
 - Consider adding ARM 64 support
   - Challenges to consider: https://github.com/raspberrypi/linux/issues/2110
 
-### [v3.7.0] - 2018-01-01
+## [v3.7.0] - 2018-01-01
 **Add Support for more Network Info and Refined Information Report**
 
-#### Added
+### Added
 - Network Info Enhancements
   - Added collection/display of: Adapter Name, IPv6 Address and MAC Address (for active connections)
     - Report only displays data for Active and Non-Virtual Adapters
     - Report only displays defined data (IPv6 not displayed if not assigned or only a local-link address)
   - Gathers network data via `ip` and `ifconfig` based on command availability on host
   - Gathers InternetIP via `dig` and `curl` based on command availability on host
 
-#### Changed
+### Changed
 - Information Report
   - Reorganized Report to minimize number of lines, improve ability to quickly scan data
   - Incorporate new Network Info without adding additional lines
@@ -28,77 +28,77 @@ This project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html
   - Changed most colors used in the report from **bold** to *normal*
 - Enhanced conditional checks when calling non-core commands to eliminates aborts
 
-### [v3.6.3] - 2017-12-23
+## [v3.6.3] - 2017-12-23
 **Enhanced Lan IP display on Linux hosts with ip command**
 
-#### Changed
+### Changed
 - LAN IP's displayed in report filtered to only those in the "UP" state
 
-### [v3.6.2] - 2017-12-23
+## [v3.6.2] - 2017-12-23
 **Enhanced LanIP collection on macOS**
-#### Fixed
+### Fixed
 - Eliminated Active IP's from possibly being misidentified as In-Active, and thus not displayed
 
-### [v3.6.1] - 2017-11-02
+## [v3.6.1] - 2017-11-02
 **Enhanced Public IP Retrieval**
-#### Added
+### Added
 - Added support for retrieving Internet IP via either `dig` or `curl`
 
-#### Changed
+### Changed
 - Switched website used to retrieve IP via `curl` as previous site "ipinfo.io" results became inconsistent
 
-### [v3.6.0] - 2017-10-18
+## [v3.6.0] - 2017-10-18
 **Improvements to Information Report**
-#### Changed
+### Changed
 - Combined CPU Name, Speed & Cores into single line
   - Correct speed displayed on variable speed CPUs
   - Adjust CPU speed to prevent rounding errors
   - Remove CPU Model Number (not consistently displayed on all systems)
 - DEVICE line only displayed as needed
 - CPU/MEM/DISK items use color to display last parameter
 
-### [v3.5.1] - 2017-10-17
+## [v3.5.1] - 2017-10-17
 **Enhanced OS Info on Linux**
-#### Added
+### Added
 - Uses /etc/os-release (if available) which provider richer data
 
-#### Changed
+### Changed
 - KERNEL version now includes sub-release number (after 3-segment version): "4.10.0-37"
 - SYSIS title & version line + empty line below removed from Information Report
 
-### [v3.4.11] - 2017-09-07
+## [v3.4.11] - 2017-09-07
 **Enhanced LAN IP collection on Linux**
-#### Added
+### Added
 - Added support for gathering IP4 address using `ip` command if available
 
-### [v3.4.10] - 2017-05-29
+## [v3.4.10] - 2017-05-29
 **Fix Terminal Type issue on some versions of Debian `tput`**
-#### Fixed
+### Fixed
 - Terminal-type "xterm-new" could trigger "unknown" fault in some versions of Debian `tput`
 
-### [v3.4.9] - 2017-04-14
+## [v3.4.9] - 2017-04-14
 **Refined Information Report**
-#### Changed
+### Changed
 - Combined CPU Speed & Cores into one line
 
-#### Removed
+### Removed
 - Memory line removed as it was redundant with data in Mem Usage line
 
-### [v3.4.8] - 2017-04-09
+## [v3.4.8] - 2017-04-09
 **Enhanced Error-Checking and Improved Report**
-#### Added
+### Added
 - Enhanced conditional checking to prevent run-time errors
 - Report section 'Device' only displayed if device values collected
 
-### [v3.4.7] - 2017-03-31
+## [v3.4.7] - 2017-03-31
 **Streamlining**
-#### Added
+### Added
 - New functions for variable cleanup and processing
 - Eliminate var processing redundancies
 
-### [v3.4.6] - 2017-03-25
+## [v3.4.6] - 2017-03-25
 **New Installer and Other Enhancements**
-#### Added
+### Added
 - New installer `install.sh` works for both remote and local installations
 - Improvements to memory use calculations on macOS
 - Updated Raspberry Pi hardware identification data