AnotherStockMix CFW for TrimUI Brick

A one-step SD card setup for the TrimUI Brick. I have really been enjoying this project, please fill free to comment in the discussions or report issues if you find them!

Instructions

1. Download onestep.7z from the releases section.
2. Extract it to a FAT32 or exFAT formatted card. (if you use Rufus to format, do not use the GPT table.)
3. Add ROMs to the Roms folder.
4. Add Screenshots to the Imgs folder (optional).

Available Emulators

• Arcade
• Atari 2600
• Atari 7800
• Atari Lynx
• Bandai WonderSwan
• Bandai WonderSwan Color
• Capcom Play System I
• Capcom Play System II
• Capcom Play System III
• Cave Story (NXEngine)
• DOSBox
• EasyRPG
• FinalBurn Neo
• Game & Watch
• IGS PolyGame Master
• MAME
• MAME2003PLUS
• MAME2010
• NEC TurboGrafx-16
• NEC TurboGrafx-CD
• Nintendo 64
• Nintendo DS
• Nintendo Famicom Disk System
• Nintendo Game Boy
• Nintendo Game Boy Advance
• Nintendo Game Boy Color
• Nintendo NES
• Nintendo Super Game Boy
• Nintendo SNES
• OpenBOR
• Panasonic 3DO
• PICO-8
• Sega 32X
• Sega CD
• Sega Dreamcast
• Sega Game Gear
• Sega Master System
• Sega Saturn
• Sega SG-1000
• SNK Neo Geo
• SNK Neo Geo Pocket
• Sony Playstation
• Sony PSP
• Videos
• MANY MORE, but they are available manually via the standalone RetroArch app.

RetroArch Hotkeys

• Note: The right lighted function key will be your hotkey in RetroArch. Keep this in mind when setting the options for it:
  • hotkey + L1 is savestate.
  • hotkey + R1 is loadstate.
  • hotkey + L2 is prev saveslot.
  • hotkey + R2 is next saveslot.
  • For more hotkeys, check RetroArch.

Accessing RetroArch Options

Press either the Trimui Button or (plus) + (minus) while in a game and select the advanced menu.

PICO-8 Notes

To use the true PICO-8 system, follow the instructions in /Emus/PICO8/.

Cheats Notes

If you'd like cheats, connect your Brick to the internet and download them with RetroArch.

Button Swapping Notes

Rename trimui optional to trimui to swap the two lighted buttons with the plus/minus buttons. This is optional.

PortMaster Instructions

1. Format an SD Card to FAT32. Make sure your partition table is MSDOS and not GPT.
2. Extract TRIMUI_EX.zip to the root of the SD Card.
3. Find the trimui_tg3040.awimg file inside TG3040_Brick_firmware_v*.zip and place it on the root of the SD Card.
4. Place (do NOT extract) the trimui.portmaster.zip file on the root of your SD Card.
5. Place the SD Card into your powered off Brick.
6. Boot the Brick by pressing VOL_DOWN + POWER. Continue to hold VOL_DOWN until the green status bar appears.
7. This takes a while, so be patient...
8. DON'T DELETE WHAT'S ON YOUR SD CARD.
9. Place AnotherStockMix onto the SD CARD as it is. Or if you are like me and want to use exFAT, make a backup of the current card first and copy it back when you are done installing AnotherStockMix.

Firmware

I recommend updating to Brick firmware 1.1.1. It adds some improvements to charging over 1.0.5, and more features than 1.0.6. I have already added the SD Card stock patches to AnotherStockMix.

Update Instructions

1. Extract Firmware 1.1.0 for Brick.7z to the root of a FAT32 formatted SD Card.
2. Turn off your Brick.
3. Insert the MicroSD card and turn on the Brick while holding Vol (-).
4. Let it update, then you can delete the file.

Credits

• trimui: Default code
• costlyclick: Original stockmix
• ro8inmorgan: LEDControl
• RWGlix: Extra ROM categories
• pajarorrojo: Background images
• hugorosario: BrickTools https://github.com/hugorosario/BrickTools

---

Shield:
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.