adding bgp_test for DPDP convergence case by selldinesh · Pull Request #1 · selldinesh/sonic-mgmt

selldinesh · 2021-02-26T17:18:26Z

Description of PR

Summary:
Fixes # (issue)

Type of change

Bug fix
Testbed and Framework(new/improvement)
Test case(new/improvement)

Approach

What is the motivation for this PR?

How did you do it?

How did you verify/test it?

Any platform specific information?

Supported testbed topology if it's a new test case?

Documentation

tests/ixia/bgp/helper.py

tests/common/ixia/ixia_fixtures.py

tests/ixia/bgp/helper.py

From the ovs doc, if mod-flow is used without --strict, priority is not used in matching. This will cause problem for downstream set_drop when duplicate_nic_upstream is disabled. For example: When set_drop is applied to upstream_nic_flow(#1), mod-flow will match both flow #2 and flow #3 as priority is not used in flow match. So let's enforce strict match for mod-flow. Signed-off-by: Longxiang Lyu <lolv@microsoft.com>

…y cases (sonic-net#12825) Description of PR This PR is to address the fixture setup sequence issue, and teardown out of sequence issue. In convert_and_restore_config_db_to_ipv6_only, it will do a "config reload -y" during fixture setup or teardown. For feature test cases where config is not saved into config_db.json, this reload needs to be done before feature fixture setup and after feature teardown, such as: tacacs_v6, setup_streaming_telemetry, or setup_ntp. According to https://docs.pytest.org/en/latest/reference/fixtures.html#reference-fixtures, it only considers the following when deciding the fixture orders: scope dependencies autouse We shouldn't use autouse in this test module. So only two options to let convert_and_restore_config_db_to_ipv6_only runs before other fixtures: define other fixtures in 'function' scope. define the feature fixture to request convert_and_restore_config_db_to_ipv6_only explicit. Using option #1 in this PR as the new 'function' scope fixture can be reused by other cases. Option #2 has good readability, but will limit the new fixture to be used by ipv6_only cases. Summary: Fixes sonic-net#12705 Approach What is the motivation for this PR? Multiple errors were observed in mgmt_ipv6 are related to fixture setup/teardown sequence. How did you do it? Added two 'function' scope fixture: check_tacacs_v6_func and setup_streaming_telemetry_func. And modified 3 tests cases to use 'function' scope fixture. test_ro_user_ipv6_only test_rw_user_ipv6_only test_telemetry_output_ipv6_only co-authorized by: jianquanye@microsoft.com

Description of PR Summary: Fixing ecnconfig command where -q was missing Fixes # (issue) sonic-net#14126 Approach What is the motivation for this PR? How did you do it? How did you verify/test it? Any platform specific information? Supported testbed topology if it's a new test case? Documentation ###OUTPUT ============================= test session starts ============================== platform linux -- Python 3.8.10, pytest-7.4.0, pluggy-1.3.0 -- /usr/bin/python3 cachedir: .pytest_cache metadata: {'Python': '3.8.10', 'Platform': 'Linux-5.4.0-150-generic-x86_64-with-glibc2.29', 'Packages': {'pytest': '7.4.0', 'pluggy': '1.3.0'}, 'Plugins': {'allure-pytest': '2.8.22', 'ansible': '4.0.0', 'forked': '1.6.0', 'html': '4.1.0', 'metadata': '3.0.0', 'repeat': '0.9.3', 'xdist': '1.28.0'}} ansible: 2.13.13 rootdir: /var/AzDevOps/sonic-mgmt/tests configfile: pytest.ini plugins: allure-pytest-2.8.22, ansible-4.0.0, forked-1.6.0, html-4.1.0, metadata-3.0.0, repeat-0.9.3, xdist-1.28.0 collecting ... ----------------------------- live log collection ------------------------------ 22:57:46 conftest.generate_params_dut_hostname L1210 INFO | Using DUTs ['sonic-s6100-dut1'] in testbed 'vms-snappi-sonic' 22:57:46 conftest.set_rand_one_dut_hostname L0418 INFO | Randomly select dut sonic-s6100-dut1 for testing 22:57:46 init.pytest_collection_modifyitems L0581 INFO | Available basic facts that can be used in conditional skip: { "topo_type": "ptf", "topo_name": "ptf64", "testbed": "vms-snappi-sonic" } collected 1 item snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn -------------------------------- live log setup -------------------------------- 22:57:46 init.set_default L0053 INFO | Completeness level not set during test execution. Setting to default level: CompletenessLevel.basic 22:57:46 init.check_test_completeness L0151 INFO | Test has no defined levels. Continue without test completeness checks 22:57:46 conftest.enhance_inventory L0245 INFO | Inventory file: ['../ansible/snappi-sonic'] 22:57:52 ptfhost_utils.run_icmp_responder_session L0239 INFO | Skip running icmp_responder at session level, it is only for dualtor testbed with active-active mux ports. 22:57:52 conftest.core_dump_and_config_check L2154 INFO | Dumping Disk and Memory Space informataion before test on sonic-s6100-dut1 22:57:52 conftest.core_dump_and_config_check L2158 INFO | Collecting core dumps before test on sonic-s6100-dut1 22:57:53 conftest.core_dump_and_config_check L2167 INFO | Collecting running config before test on sonic-s6100-dut1 22:57:55 init.sanity_check L0306 INFO | Skip sanity check according to command line argument 22:57:55 init._fixture_generator_decorator L0081 INFO | -------------------- fixture enable_packet_aging_after_test setup starts -------------------- 22:57:55 init._fixture_generator_decorator L0085 INFO | -------------------- fixture enable_packet_aging_after_test setup ends -------------------- 22:57:55 init._fixture_generator_decorator L0081 INFO | -------------------- fixture rand_lossless_prio setup starts -------------------- 22:57:55 init._fixture_generator_decorator L0085 INFO | -------------------- fixture rand_lossless_prio setup ends -------------------- 22:57:55 init._fixture_generator_decorator L0081 INFO | -------------------- fixture rand_lossy_prio setup starts -------------------- 22:57:55 init._fixture_generator_decorator L0085 INFO | -------------------- fixture rand_lossy_prio setup ends -------------------- 22:57:55 init._fixture_generator_decorator L0081 INFO | -------------------- fixture start_pfcwd_after_test setup starts -------------------- 22:57:55 init._fixture_generator_decorator L0085 INFO | -------------------- fixture start_pfcwd_after_test setup ends -------------------- 22:57:55 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_api_serv_ip setup starts -------------------- 22:57:55 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_api_serv_ip setup ends -------------------- 22:57:55 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_api_serv_port setup starts -------------------- 22:57:55 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_api_serv_port setup ends -------------------- 22:57:55 init._fixture_generator_decorator L0081 INFO | -------------------- fixture snappi_api setup starts -------------------- 22:57:55 init._fixture_generator_decorator L0085 INFO | -------------------- fixture snappi_api setup ends -------------------- 22:57:55 conftest.rand_one_dut_front_end_hostname L0450 INFO | Randomly select dut sonic-s6100-dut1 for testing 22:57:56 conftest.generate_port_lists L1279 INFO | Generate dut_port_map: {'sonic-s6100-dut1': ['sonic-s6100-dut1|Ethernet0', 'sonic-s6100-dut1|Ethernet4']} 22:57:56 conftest.generate_port_lists L1302 INFO | Generate port_list: ['sonic-s6100-dut1|Ethernet0', 'sonic-s6100-dut1|Ethernet4'] 22:57:56 init._fixture_func_decorator L0069 INFO | -------------------- fixture prio_dscp_map setup starts -------------------- 22:57:56 init._fixture_func_decorator L0076 INFO | -------------------- fixture prio_dscp_map setup ends -------------------- 22:57:56 init.loganalyzer L0051 INFO | Log analyzer is disabled 22:57:56 init.memory_utilization L0091 INFO | Hostname: sonic-s6100-dut1, Hwsku: Accton-AS7726-32X, Platform: x86_64-accton_as7726_32x-r0 22:57:56 init.store_fixture_values L0017 INFO | store memory_utilization test_dequeue_ecn 22:57:56 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_testbed_config setup starts -------------------- 22:57:57 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_testbed_config setup ends -------------------- 22:57:57 init.pytest_runtest_setup L0024 INFO | collect memory before test test_dequeue_ecn 22:57:58 init.pytest_runtest_setup L0044 INFO | Before test: collected memory_values {'before_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 15.3}}}, 'after_test': {'sonic-s6100-dut1': {}}} -------------------------------- live log call --------------------------------- 22:57:58 test_dequeue_ecn_with_snappi.test_dequeu L0066 INFO | Running ECN dequeue test with params: {'kmin': 50000, 'kmax': 51000, 'pmax': 100} 22:57:58 helper.run_ecn_test L0058 INFO | Stopping PFC watchdog 22:57:58 helper.run_ecn_test L0060 INFO | Disabling packet aging if necessary 22:57:58 helper.run_ecn_test L0064 INFO | Configuring WRED and ECN thresholds 22:58:00 helper.run_ecn_test L0072 INFO | Enabling ECN markings 22:58:03 helper.run_ecn_test L0081 INFO | Waiting on ECN and dynamic buffer configuration to take effect. Sleeping for 10 seconds. 22:58:13 helper.run_ecn_test L0097 INFO | Generating base flow config 22:58:13 helper.run_ecn_test L0102 INFO | Setting test flow config params 22:58:13 helper.run_ecn_test L0110 INFO | Setting pause flow config params 22:58:13 helper.run_ecn_test L0124 INFO | Generating test flows 22:58:13 helper.run_ecn_test L0130 INFO | Generating pause flows 22:58:13 helper.run_ecn_test L0141 INFO | Setting packet capture port to Port 1 22:58:13 helper.run_ecn_test L0145 INFO | Running 1 iteration(s) 22:58:13 helper.run_ecn_test L0147 INFO | Running iteration 0 22:58:13 helper.run_ecn_test L0149 INFO | Packet capture file: ECN_cap-0.pcapng 22:58:13 helper.run_ecn_test L0156 INFO | Running traffic 22:58:13 connection._warn L0246 WARNING| Verification of certificates is disabled 22:58:13 connection._info L0243 INFO | Determining the platform and rest_port using the 10.36.78.59 address... 22:58:13 connection._warn L0246 WARNING| Unable to connect to http://10.36.78.59:443. 22:58:13 connection._info L0243 INFO | Connection established to https://10.36.78.59:443 on linux 22:58:36 connection._info L0243 INFO | Using IxNetwork api server version 10.20.2403.2 22:58:36 connection._info L0243 INFO | User info IxNetwork/ixnetworkweb/admin-62-23797 22:58:37 snappi_api.info L1132 INFO | snappi-0.9.1 22:58:37 snappi_api.info L1132 INFO | snappi_ixnetwork-0.8.2 22:58:37 snappi_api.info L1132 INFO | ixnetwork_restpy-1.0.64 22:58:38 snappi_api.info L1132 INFO | Config validation 0.013s 22:58:41 snappi_api.info L1132 INFO | Ports configuration 2.098s 22:58:41 snappi_api.info L1132 INFO | Captures configuration 0.631s 22:58:44 snappi_api.info L1132 INFO | Add location hosts [10.36.78.96] 2.458s 22:58:49 snappi_api.info L1132 INFO | Location hosts ready [10.36.78.96] 4.298s 22:58:49 snappi_api.info L1132 INFO | Speed conversion is not require for (port.name, speed) : [('Port 0', 'novusHundredGigNonFanOut'), ('Port 1', 'novusHundredGigNonFanOut')] 22:58:49 snappi_api.info L1132 INFO | Aggregation mode speed change 0.549s 22:58:54 snappi_api.info L1132 INFO | Location preemption [10.36.78.96;1;5, 10.36.78.96;1;6] 0.241s 22:59:17 snappi_api.info L1132 INFO | Location connect [Port 0, Port 1] 22.595s 22:59:17 snappi_api.warning L1138 WARNING| Port 0 connectedLinkDown 22:59:17 snappi_api.warning L1138 WARNING| Port 1 connectedLinkDown 22:59:17 snappi_api.info L1132 INFO | Location state check [Port 0, Port 1] 0.455s 22:59:17 snappi_api.info L1132 INFO | Location configuration 35.939s 22:59:27 snappi_api.info L1132 INFO | Layer1 configuration 9.982s 22:59:28 snappi_api.info L1132 INFO | Lag Configuration 0.160s 22:59:28 snappi_api.info L1132 INFO | Convert device config : 0.412s 22:59:28 snappi_api.info L1132 INFO | Create IxNetwork device config : 0.000s 22:59:29 snappi_api.info L1132 INFO | Push IxNetwork device config : 0.849s 22:59:29 snappi_api.info L1132 INFO | Devices configuration 1.397s 22:59:33 snappi_api.info L1132 INFO | Flows configuration 4.227s 22:59:44 snappi_api.info L1132 INFO | Start interfaces 10.798s 22:59:45 snappi_api.info L1132 INFO | IxNet - The Traffic Item was modified. Please perform a Traffic Generate to update the associated traffic Flow Groups 22:59:45 traffic_generation.run_traffic L0322 INFO | Wait for Arp to Resolve ... 22:59:47 traffic_generation.run_traffic L0333 INFO | Starting packet capture ... 22:59:49 snappi_api.info L1132 INFO | Captures start 1.911s 22:59:53 traffic_generation.run_traffic L0343 INFO | Starting transmit on all flows ... 22:59:58 snappi_api.info L1132 INFO | Flows generate/apply 4.230s 23:00:10 snappi_api.info L1132 INFO | Flows clear statistics 11.831s 23:00:11 snappi_api.info L1132 INFO | Captures start 1.086s 23:00:15 snappi_api.info L1132 INFO | Flows start 3.528s 23:00:16 traffic_generation.run_traffic L0380 INFO | Polling TGEN for in-flight traffic statistics... 23:00:20 traffic_generation.run_traffic L0388 INFO | Checking if all flows have stopped. Attempt #1 23:00:22 traffic_generation.run_traffic L0395 INFO | All test and background traffic flows stopped 23:00:24 traffic_generation.run_traffic L0406 INFO | Stopping packet capture ... 23:00:26 snappi_api.info L1132 INFO | Captures stop 1.348s 23:00:26 traffic_generation.run_traffic L0412 INFO | Retrieving and saving packet capture to ECN_cap-0.pcapng 23:03:05 snappi_api.warning L1138 WARNING| Capture was not stopped for this port Port 1 23:03:05 snappi_api.info L1132 INFO | Captures stop 158.173s 23:03:08 traffic_generation.run_traffic L0418 INFO | Dumping per-flow statistics 23:03:10 traffic_generation.run_traffic L0420 INFO | Stopping transmit on all remaining flows 23:03:11 read_pcap.get_ipv4_pkts L0080 INFO | Reading packets from pcap file -> ECN_cap-0.pcapng 23:03:11 read_pcap.get_ipv4_pkts L0081 INFO | Extracting ethernet frames from pcap file 23:03:11 test_dequeue_ecn_with_snappi.test_dequeu L0085 INFO | Running verification for ECN dequeue test 23:03:11 read_pcap.is_ecn_marked L0103 INFO | Checking if the packet is ECN congestion marked 23:03:11 read_pcap.is_ecn_marked L0103 INFO | Checking if the packet is ECN congestion marked 23:03:11 test_dequeue_ecn_with_snappi.test_dequeu L0098 INFO | Reloading config to teardown ECN config 23:03:11 config_reload.config_reload L0138 INFO | reloading config_db 23:04:52 processes_utils.wait_critical_processes L0076 INFO | Wait until all critical processes are healthy in 300 sec 23:04:52 processes_utils.all_critical_processes L0045 INFO | Check critical processes status PASSED [100%] ------------------------------ live log teardown ------------------------------- 23:04:56 init.pytest_runtest_teardown L0049 INFO | collect memory after test test_dequeue_ecn 23:04:57 init.pytest_runtest_teardown L0072 INFO | After test: collected memory_values {'before_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 15.3}}}, 'after_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 5.6}}}} 23:04:57 init._fixture_generator_decorator L0093 INFO | -------------------- fixture snappi_api teardown starts -------------------- 23:05:20 init._fixture_generator_decorator L0102 INFO | -------------------- fixture snappi_api teardown ends -------------------- 23:05:20 init._fixture_generator_decorator L0093 INFO | -------------------- fixture start_pfcwd_after_test teardown starts -------------------- 23:05:21 init._fixture_generator_decorator L0102 INFO | -------------------- fixture start_pfcwd_after_test teardown ends -------------------- 23:05:21 init._fixture_generator_decorator L0093 INFO | -------------------- fixture rand_lossy_prio teardown starts -------------------- 23:05:21 init._fixture_generator_decorator L0102 INFO | -------------------- fixture rand_lossy_prio teardown ends -------------------- 23:05:21 init._fixture_generator_decorator L0093 INFO | -------------------- fixture rand_lossless_prio teardown starts -------------------- 23:05:21 init._fixture_generator_decorator L0102 INFO | -------------------- fixture rand_lossless_prio teardown ends -------------------- 23:05:21 init._fixture_generator_decorator L0093 INFO | -------------------- fixture enable_packet_aging_after_test teardown starts -------------------- 23:05:21 init._fixture_generator_decorator L0102 INFO | -------------------- fixture enable_packet_aging_after_test teardown ends -------------------- 23:05:21 conftest.core_dump_and_config_check L2195 INFO | Dumping Disk and Memory Space informataion after test on sonic-s6100-dut1 23:05:22 conftest.core_dump_and_config_check L2199 INFO | Collecting core dumps after test on sonic-s6100-dut1 23:05:22 conftest.core_dump_and_config_check L2216 INFO | Collecting running config after test on sonic-s6100-dut1 23:05:23 conftest.core_dump_and_config_check L2344 WARNING| Core dump or config check failed for test_dequeue_ecn_with_snappi.py, results: {"core_dump_check": {"pass": true, "new_core_dumps": {"sonic-s6100-dut1": []}}, "config_db_check": {"pass": false, "pre_only_config": {"sonic-s6100-dut1": {"null": {}}}, "cur_only_config": {"sonic-s6100-dut1": {"null": {"PFC_WD": {"GLOBAL": {"POLL_INTERVAL": "200"}}}}}, "inconsistent_config": {"sonic-s6100-dut1": {"null": {}}}}} 23:05:23 conftest.__dut_reload L2086 INFO | dut reload called on sonic-s6100-dut1 23:05:23 config_reload.config_reload L0138 INFO | reloading config_db 23:08:45 parallel.on_terminate L0085 INFO | process __dut_reload-- terminated with exit code None 23:08:45 parallel.parallel_run L0221 INFO | Completed running processes for target "__dut_reload" in 0:03:22.578938 seconds =============================== warnings summary =============================== ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.loganalyzer self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.sanity_check self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.test_completeness self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.dualtor self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/paramiko/transport.py:236 /usr/local/lib/python3.8/dist-packages/paramiko/transport.py:236: CryptographyDeprecationWarning: Blowfish has been deprecated "class": algorithms.Blowfish, ../../../../usr/local/lib/python3.8/dist-packages/scapy/layers/ipsec.py:471 /usr/local/lib/python3.8/dist-packages/scapy/layers/ipsec.py:471: CryptographyDeprecationWarning: Blowfish has been deprecated cipher=algorithms.Blowfish, ../../../../usr/local/lib/python3.8/dist-packages/scapy/layers/ipsec.py:485 /usr/local/lib/python3.8/dist-packages/scapy/layers/ipsec.py:485: CryptographyDeprecationWarning: CAST5 has been deprecated cipher=algorithms.CAST5, snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn /usr/local/lib/python3.8/dist-packages/pytest_ansible/module_dispatcher/v213.py:100: UserWarning: provided hosts list is empty, only localhost is available warnings.warn("provided hosts list is empty, only localhost is available") snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn /var/AzDevOps/.local/lib/python3.8/site-packages/snappi_ixnetwork/device/utils.py:2: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will stop working from collections import namedtuple, Mapping snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn snappi_tests/ecn/test_dequeue_ecn_with_snappi.py::test_dequeue_ecn /usr/local/lib/python3.8/dist-packages/ixnetwork_restpy/testplatform/sessions/sessions.py:59: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead. elif LooseVersion(build_number) < LooseVersion('8.52'): -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html ---------------------------- live log sessionfinish ---------------------------- 23:08:45 init.pytest_terminal_summary L0067 INFO | Can not get Allure report URL. Please check logs ================== 1 passed, 14 warnings in 659.38s (0:10:59) ================== co-authorized by: jianquanye@microsoft.com

…onic-net#14416) Description of PR Summary: Adding dut counter verification for PFC Oversubscription cases Fixes # (issue) sonic-net#13596 Approach Dependency sonic-net#13848 What is the motivation for this PR? Verifies the packet drops from the dut interface counters How did you do it? How did you verify/test it? Any platform specific information? Supported testbed topology if it's a new test case? Documentation Output 18:43:03 test_m2o_oversubscribe_lossless.test_m2o L0077 INFO | Running test for testbed subtype: single-dut-single-asic 18:43:03 snappi_fixtures.__intf_config_multidut L0796 INFO | Configuring Dut: sonic-s6100-dut1 with port Ethernet0 with IP 20.1.1.1/24 18:43:05 snappi_fixtures.__intf_config_multidut L0796 INFO | Configuring Dut: sonic-s6100-dut1 with port Ethernet4 with IP 20.1.2.1/24 18:43:07 snappi_fixtures.__intf_config_multidut L0796 INFO | Configuring Dut: sonic-s6100-dut1 with port Ethernet8 with IP 20.1.3.1/24 18:43:10 connection._warn L0246 WARNING| Verification of certificates is disabled 18:43:10 connection._info L0243 INFO | Determining the platform and rest_port using the 10.36.78.59 address... 18:43:10 connection._warn L0246 WARNING| Unable to connect to http://10.36.78.59:443. 18:43:10 connection._info L0243 INFO | Connection established to https://10.36.78.59:443 on linux 18:43:24 connection._info L0243 INFO | Using IxNetwork api server version 10.20.2403.2 18:43:24 connection._info L0243 INFO | User info IxNetwork/ixnetworkweb/admin-68-20480 18:43:25 snappi_api.info L1132 INFO | snappi-0.9.1 18:43:25 snappi_api.info L1132 INFO | snappi_ixnetwork-0.8.2 18:43:25 snappi_api.info L1132 INFO | ixnetwork_restpy-1.0.64 18:43:25 snappi_api.info L1132 INFO | Config validation 0.020s 18:43:27 snappi_api.info L1132 INFO | Ports configuration 1.544s 18:43:27 snappi_api.info L1132 INFO | Captures configuration 0.161s 18:43:30 snappi_api.info L1132 INFO | Add location hosts [10.36.78.53] 2.285s 18:43:34 snappi_api.info L1132 INFO | Location hosts ready [10.36.78.53] 4.212s 18:43:35 snappi_api.info L1132 INFO | Speed conversion is not require for (port.name, speed) : [('Port 0', 'novusHundredGigNonFanOut'), ('Port 1', 'novusHundredGigNonFanOut'), ('Port 2', 'novusHundredGigNonFanOut')] 18:43:35 snappi_api.info L1132 INFO | Aggregation mode speed change 0.479s 18:43:42 snappi_api.info L1132 INFO | Location preemption [10.36.78.53;6;1, 10.36.78.53;6;2, 10.36.78.53;6;3] 0.111s 18:44:07 snappi_api.info L1132 INFO | Location connect [Port 0, Port 1, Port 2] 25.066s 18:44:07 snappi_api.warning L1138 WARNING| Port 0 connectedLinkDown 18:44:07 snappi_api.warning L1138 WARNING| Port 1 connectedLinkDown 18:44:07 snappi_api.warning L1138 WARNING| Port 2 connectedLinkDown 18:44:07 snappi_api.info L1132 INFO | Location state check [Port 0, Port 1, Port 2] 0.245s 18:44:07 snappi_api.info L1132 INFO | Location configuration 39.389s 18:44:19 snappi_api.info L1132 INFO | Layer1 configuration 12.161s 18:44:19 snappi_api.info L1132 INFO | Lag Configuration 0.082s 18:44:19 snappi_api.info L1132 INFO | Convert device config : 0.224s 18:44:19 snappi_api.info L1132 INFO | Create IxNetwork device config : 0.000s 18:44:20 snappi_api.info L1132 INFO | Push IxNetwork device config : 0.641s 18:44:20 snappi_api.info L1132 INFO | Devices configuration 0.940s 18:44:25 snappi_api.info L1132 INFO | Flows configuration 5.128s 18:45:25 snappi_api.info L1132 INFO | Start interfaces 59.556s 18:45:25 snappi_api.info L1132 INFO | IxNet - The Traffic Item was modified. Please perform a Traffic Generate to update the associated traffic Flow Groups 18:45:30 traffic_generation.run_traffic L0322 INFO | Wait for Arp to Resolve ... 18:45:36 traffic_generation.run_traffic L0322 INFO | Starting transmit on all flows ... 18:48:41 snappi_api.info L1132 INFO | Flows generate/apply 184.474s 18:48:54 snappi_api.info L1132 INFO | Flows clear statistics 12.396s 18:48:54 snappi_api.info L1132 INFO | Captures start 0.000s 18:49:17 snappi_api.info L1132 INFO | Flows start 22.926s 18:49:17 traffic_generation.run_traffic L0322 INFO | Polling DUT for traffic statistics for 15 seconds ... 18:49:23 traffic_generation.run_traffic L0322 INFO | Polling TGEN for in-flight traffic statistics... 18:49:25 traffic_generation.run_traffic L0322 INFO | In-flight traffic statistics for flows: ['Test Flow 1 -> 0', 'Test Flow 2 -> 0', 'Background Flow 1 -> 0', 'Background Flow 2 -> 0'] 18:49:25 traffic_generation.run_traffic L0322 INFO | In-flight TX frames: [6312174, 6312175, 6310775, 6310775] 18:49:25 traffic_generation.run_traffic L0322 INFO | In-flight RX frames: [6311444, 6311444, 6310765, 6310766] 18:49:29 traffic_generation.run_traffic L0322 INFO | DUT polling complete 18:49:29 traffic_generation.run_traffic L0322 INFO | Checking if all flows have stopped. Attempt #1 18:49:30 traffic_generation.run_traffic L0322 INFO | ['started', 'started', 'started', 'started'] 18:49:31 traffic_generation.run_traffic L0322 INFO | Checking if all flows have stopped. Attempt #2 18:49:32 traffic_generation.run_traffic L0322 INFO | ['started', 'started', 'started', 'started'] 18:49:33 traffic_generation.run_traffic L0322 INFO | Checking if all flows have stopped. Attempt #3 18:49:35 traffic_generation.run_traffic L0322 INFO | ['started', 'started', 'stopped', 'stopped'] 18:49:36 traffic_generation.run_traffic L0322 INFO | Checking if all flows have stopped. Attempt #4 18:49:37 traffic_generation.run_traffic L0322 INFO | ['stopped', 'stopped', 'stopped', 'stopped'] 18:49:37 traffic_generation.run_traffic L0322 INFO | All test and background traffic flows stopped 18:49:39 traffic_generation.run_traffic L0322 INFO | Dumping per-flow statistics 18:49:40 traffic_generation.run_traffic L0322 INFO | Stopping transmit on all remaining flows 18:49:41 snappi_fixtures.cleanup_config L0952 INFO | Removing Configuration on Dut: sonic-s6100-dut1 with port Ethernet0 with ip :20.1.1.1/24 18:49:43 snappi_fixtures.cleanup_config L0952 INFO | Removing Configuration on Dut: sonic-s6100-dut1 with port Ethernet4 with ip :20.1.2.1/24 18:49:45 snappi_fixtures.cleanup_config L0952 INFO | Removing Configuration on Dut: sonic-s6100-dut1 with port Ethernet8 with ip :20.1.3.1/24 PASSED [100%] ------------------------------------------------------------ live log teardown ------------------------------------------------------------- 18:49:47 init.pytest_runtest_teardown L0049 INFO | collect memory after test test_m2o_oversubscribe_lossless[multidut_port_info0] 18:49:48 init.pytest_runtest_teardown L0072 INFO | After test: collected memory_values {'before_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 13.9}}}, 'after_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 31.3}}}} 18:49:48 init._fixture_generator_decorator L0093 INFO | -------------------- fixture snappi_api teardown starts -------------------- 18:50:03 init._fixture_generator_decorator L0102 INFO | -------------------- fixture snappi_api teardown ends -------------------- 18:50:03 init._fixture_generator_decorator L0093 INFO | -------------------- fixture start_pfcwd_after_test teardown starts -------------------- 18:50:05 init._fixture_generator_decorator L0102 INFO | -------------------- fixture start_pfcwd_after_test teardown ends -------------------- 18:50:05 init._fixture_generator_decorator L0093 INFO | -------------------- fixture rand_lossy_prio teardown starts -------------------- 18:50:05 init._fixture_generator_decorator L0102 INFO | -------------------- fixture rand_lossy_prio teardown ends -------------------- 18:50:05 init._fixture_generator_decorator L0093 INFO | -------------------- fixture rand_lossless_prio teardown starts -------------------- 18:50:05 init._fixture_generator_decorator L0102 INFO | -------------------- fixture rand_lossless_prio teardown ends -------------------- 18:50:05 init._fixture_generator_decorator L0093 INFO | -------------------- fixture enable_packet_aging_after_test teardown starts -------------------- 18:50:05 init._fixture_generator_decorator L0102 INFO | -------------------- fixture enable_packet_aging_after_test teardown ends -------------------- 18:50:05 conftest.core_dump_and_config_check L2203 INFO | Dumping Disk and Memory Space informataion after test on sonic-s6100-dut1 18:50:06 conftest.core_dump_and_config_check L2207 INFO | Collecting core dumps after test on sonic-s6100-dut1 18:50:07 conftest.core_dump_and_config_check L2224 INFO | Collecting running config after test on sonic-s6100-dut1 18:50:08 conftest.core_dump_and_config_check L2352 WARNING| Core dump or config check failed for test_m2o_oversubscribe_lossless.py, results: {"core_dump_check": {"pass": true, "new_core_dumps": {"sonic-s6100-dut1": []}}, "config_db_check": {"pass": false, "pre_only_config": {"sonic-s6100-dut1": {"null": {"INTERFACE": {"Ethernet0": {}, "Ethernet12": {}, "Ethernet4": {}, "Ethernet8": {}, "Ethernet0|21.1.1.1/24": {}, "Ethernet12|24.1.1.1/24": {}, "Ethernet4|22.1.1.1/24": {}, "Ethernet8|23.1.1.1/24": {}}}}}, "cur_only_config": {"sonic-s6100-dut1": {"null": {}}}, "inconsistent_config": {"sonic-s6100-dut1": {"null": {"PFC_WD": {"pre_value": {"GLOBAL": {"POLL_INTERVAL": "200"}}, "cur_value": {"Ethernet0": {"action": "drop", "detection_time": "200", "restoration_time": "200"}, "Ethernet12": {"action": "drop", "detection_time": "200", "restoration_time": "200"}, "Ethernet4": {"action": "drop", "detection_time": "200", "restoration_time": "200"}, "Ethernet8": {"action": "drop", "detection_time": "200", "restoration_time": "200"}, "GLOBAL": {"POLL_INTERVAL": "200"}}}}}}}} 18:50:08 conftest.__dut_reload L2091 INFO | dut reload called on sonic-s6100-dut1 18:50:10 parallel.on_terminate L0085 INFO | process __dut_reload-- terminated with exit code None 18:50:10 parallel.parallel_run L0221 INFO | Completed running processes for target "__dut_reload" in 0:00:01.443244 seconds 18:50:10 conftest.core_dump_and_config_check L2362 INFO | -----$$$$$$$$$$--------------- Executing config reload of config_db_bgp.json -------------$$$$$$$$$$$$$$ ============================================================= warnings summary ============================================================= ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.loganalyzer self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.sanity_check self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.plugins.test_completeness self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755 /usr/local/lib/python3.8/dist-packages/_pytest/config/init.py:755: PytestAssertRewriteWarning: Module already imported so cannot be rewritten: tests.common.dualtor self.import_plugin(import_spec) ../../../../usr/local/lib/python3.8/dist-packages/paramiko/transport.py:236 /usr/local/lib/python3.8/dist-packages/paramiko/transport.py:236: CryptographyDeprecationWarning: Blowfish has been deprecated "class": algorithms.Blowfish, snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] /usr/local/lib/python3.8/dist-packages/pytest_ansible/module_dispatcher/v213.py:100: UserWarning: provided hosts list is empty, only localhost is available warnings.warn("provided hosts list is empty, only localhost is available") snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] /var/AzDevOps/.local/lib/python3.8/site-packages/snappi_ixnetwork/device/utils.py:2: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will stop working from collections import namedtuple, Mapping snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] snappi_tests/multidut/pfc/test_m2o_oversubscribe_lossless.py::test_m2o_oversubscribe_lossless[multidut_port_info0] /usr/local/lib/python3.8/dist-packages/ixnetwork_restpy/testplatform/sessions/sessions.py:59: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead. elif LooseVersion(build_number) < LooseVersion('8.52'): -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html ---------------------------------------------------------- live log sessionfinish ---------------------------------------------------------- 18:50:41 init.pytest_terminal_summary L0067 INFO | Can not get Allure report URL. Please check logs ================================================ 1 passed, 13 warnings in 473.16s (0:07:53) ================================================ co-authorized by: jianquanye@microsoft.com

…in pfc_pause_lossless test (sonic-net#18105) Description of PR In tests/snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py, we have reboot testcases. We disable the PFCWD and Credit-WD in the testcase and reboot the the DUT depending upon type of reboot. However, on cold-reboot, the Credit-WD is getting reset back. This causes the lossless test flows on IXIA to continuously send traffic despite of the pause-storm. The run_traffic in traffic_generation.py is trying to determine if the test stops within a stipulated duration, which it does not and throws an assert that flows have not stopped within the given time duration and attempts. Summary: Fixes # (issue) sonic-net#18082 Type of change Bug fix Testbed and Framework(new/improvement) New Test case Skipped for non-supported platforms Test case improvement Back port request 202012 202205 202305 202311 202405 202411 Approach What is the motivation for this PR? The reboot_dut was called after the PFCWD and Credit-WD disable. The reboot caused the Credit-WD to reset back and hence test failed. How did you do it? Created a single fixture called reboot_duts_and_disable_wd to reboot the DUTs and disable Credit and PFC watch-dogs. This fixture is added in snappi_tests/files/helper.py. Modified the testcase - snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py to incorporate the above fixture. How did you verify/test it? T0/T1 setup verification: AzDevOps@sonic_mgmt_nokia_202411:/data/sonic-mgmt/tests$ date;python3 -m pytest --inventory ../ansible/ixia-sonic --host-pattern ixr-x3b-14 --testbed ixr-aaa-14-t2 --testbed_file ../ansible/testbed.csv --log-cli-level info --log-file-level info --kube_master unset --showlocals -ra --show-capture stdout --junit-xml=/tmp/p.xml --skip_sanity --log-file=/tmp/p.log --cache-clear --topology tgen snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py -k reboot Thu May 1 13:45:24 UTC 2025 -------------------------- curtailed output ----------------------- snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py::test_pfc_pause_single_lossless_prio_reboot[multidut_port_info0-cold-ixr-aaa-14|3] --------------------------------------------------------------------------------------------------- live log setup ---------------------------------------------------------------------------------------------------- 13:46:03 __init__.set_default L0053 INFO | Completeness level not set during test execution. Setting to default level: CompletenessLevel.basic 13:46:03 __init__.check_test_completeness L0151 INFO | Test has no defined levels. Continue without test completeness checks 13:46:03 __init__.loganalyzer L0067 INFO | Log analyzer is disabled 13:46:03 __init__.store_fixture_values L0020 INFO | store memory_utilization test_pfc_pause_single_lossless_prio_reboot[multidut_port_info0-cold-ixr-aaa-14|3] 13:46:03 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup starts -------------------- 13:46:03 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup ends -------------------- 13:46:03 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture multidut_port_info setup starts -------------------- 13:46:03 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture multidut_port_info setup ends -------------------- 13:46:03 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture number_of_tx_rx_ports setup starts -------------------- 13:46:03 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture number_of_tx_rx_ports setup ends -------------------- 13:46:03 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture setup_ports_and_dut setup starts -------------------- 13:46:03 helper.setup_ports_and_dut L0111 INFO | Running test for testbed subtype: single-dut-multi-asic-aaa 13:46:04 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture setup_ports_and_dut setup ends -------------------- 13:46:04 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture reboot_duts_and_disable_wd setup starts -------------------- 13:46:05 sonic.get_asic_name L1797 INFO | asic: unknown 13:46:05 helper.skip_warm_reboot L0045 INFO | Reboot type cold is supported on broadcom switches 13:46:05 sonic.get_asic_name L1797 INFO | asic: unknown 13:46:05 helper.skip_warm_reboot L0045 INFO | Reboot type cold is supported on broadcom switches 13:46:08 helper.save_config_and_reboot L0210 INFO | Issuing a cold reboot on the dut ixr-aaa-14 13:46:11 reboot.reboot L0271 INFO | Reboot ixr-aaa-14: wait[120], timeout[300] 13:46:11 reboot.reboot L0273 INFO | DUT ixr-aaa-14 create a file /dev/shm/test_reboot before rebooting 13:46:12 reboot.collect_console_log L0566 INFO | start: collect console log 13:46:12 dut_utils.creds_on_dut L0471 INFO | dut ixr-aaa-14 belongs to groups ['ixia-sonic', 'sonic', 'sonic_aaa', 'fanout'] 13:46:12 dut_utils.creds_on_dut L0496 INFO | skip empty var file /data/sonic-mgmt/tests/common/helpers/../../../ansible/group_vars/all/corefile_uploader.yml 13:46:12 transport._log L1873 INFO | Connected (version 2.0, client OpenSSH_9.2p1) 13:46:16 transport._log L1873 INFO | Auth banner: b'Debian GNU/Linux 12 \\n \\l\n\n' 13:46:16 transport._log L1873 INFO | Authentication (password) failed. 13:46:16 transport._log L1873 INFO | Connected (version 2.0, client OpenSSH_9.2p1) 13:46:16 transport._log L1873 INFO | Auth banner: b'Debian GNU/Linux 12 \\n \\l\n\n' 13:46:16 transport._log L1873 INFO | Authentication (password) successful! 13:46:17 reboot.try_create_dut_console L0559 WARNING| Fail to create dut console. Please check console config or if console works ro not. 'ManagementIp' 13:46:17 reboot.collect_console_log L0576 WARNING| dut console is not ready, we cannot get log by console 13:46:17 reboot.wait_for_shutdown L0164 INFO | waiting for ssh to drop on ixr-aaa-14 13:46:17 reboot.execute_reboot_command L0205 INFO | rebooting ixr-aaa-14 with command "reboot" 13:46:35 reboot.wait_for_startup L0185 INFO | waiting for ssh to startup on ixr-aaa-14 13:48:05 reboot.wait_for_startup L0197 INFO | ssh has started up on ixr-aaa-14 13:48:05 reboot.reboot L0300 INFO | waiting for switch ixr-aaa-14 to initialize 13:52:31 processes_utils.wait_critical_processes L0078 INFO | Wait until all critical processes are healthy in 600 sec 13:52:31 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 13:52:40 reboot.reboot L0330 INFO | cold reboot finished on ixr-aaa-14 13:52:41 reboot.reboot L0333 INFO | DUT ixr-aaa-14 up since 2025-05-01 13:47:31.410000 13:52:41 helper.save_config_and_reboot L0214 INFO | Wait until the system is stable 13:52:47 sonic_asic.check_bgp_session_state L0714 INFO | bgp neighbors that match the state: ['3.3.3.2', '3333::3:2'] on namespace asic0 13:52:47 sonic_asic.check_bgp_session_state L0715 INFO | bgp neighbors to be checked on the state: [] on namespace asic0 13:52:48 sonic_asic.check_bgp_session_state L0714 INFO | bgp neighbors that match the state: ['3.3.3.1', '3333::3:1'] on namespace asic1 13:52:48 sonic_asic.check_bgp_session_state L0715 INFO | bgp neighbors to be checked on the state: [] on namespace asic1 13:52:48 parallel.on_terminate L0085 INFO | process save_config_and_reboot--<MultiAsicSonicHost ixr-aaa-14> terminated with exit code None 13:52:48 parallel.parallel_run L0221 INFO | Completed running processes for target "save_config_and_reboot" in 0:06:43.000484 seconds 13:52:54 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture reboot_duts_and_disable_wd setup ends -------------------- 13:52:54 __init__.pytest_runtest_setup L0034 INFO | collect memory before test test_pfc_pause_single_lossless_prio_reboot[multidut_port_info0-cold-ixr-aaa-14|3] 13:52:54 __init__.pytest_runtest_setup L0054 INFO | Before test: collected memory_values {'before_test': {}, 'after_test': {}} -------------------------- curtailed output ----------------------- 13:57:03 traffic_generation.run_traffic L0465 INFO | In-flight traffic statistics for flows: ['Test Flow Prio 3', 'Background Flow Prio 1', 'Background Flow Prio 4', 'Background Flow Prio 5', 'Background Flow Prio 6', 'Background Flow Prio 2', 'Background Flow Prio 0'] 13:57:03 traffic_generation.run_traffic L0466 INFO | In-flight TX frames: [70428, 63697318, 63697318, 63697318, 63697318, 63697318, 63697318] 13:57:03 traffic_generation.run_traffic L0467 INFO | In-flight RX frames: [0, 63697318, 63697318, 63697318, 63697318, 63697318, 63697318] 13:57:21 traffic_generation.run_traffic L0468 INFO | DUT polling complete 13:57:21 traffic_generation.run_traffic L0479 INFO | Checking if all flows have stopped. Attempt #1 13:57:22 traffic_generation.run_traffic L0486 INFO | All test and background traffic flows stopped 13:57:24 traffic_generation.run_traffic L0514 INFO | Dumping per-flow statistics 13:57:25 traffic_generation.run_traffic L0516 INFO | Stopping transmit on all remaining flows 13:57:32 snappi_api.info L1132 INFO | Flows stop 6.258s PASSED -------------------------- curtailed output ----------------------- snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py::test_pfc_pause_multi_lossless_prio_reboot[multidut_port_info0-cold] --------------------------------------------------------------------------------------------------- live log setup ---------------------------------------------------------------------------------------------------- 14:17:56 __init__.set_default L0053 INFO | Completeness level not set during test execution. Setting to default level: CompletenessLevel.basic 14:17:56 __init__.check_test_completeness L0151 INFO | Test has no defined levels. Continue without test completeness checks 14:17:56 __init__.loganalyzer L0067 INFO | Log analyzer is disabled 14:17:56 __init__.store_fixture_values L0020 INFO | store memory_utilization test_pfc_pause_multi_lossless_prio_reboot[multidut_port_info0-cold] 14:17:56 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup starts -------------------- 14:17:56 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup ends -------------------- 14:17:56 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture multidut_port_info setup starts -------------------- 14:17:56 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture multidut_port_info setup ends -------------------- 14:17:56 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture number_of_tx_rx_ports setup starts -------------------- 14:17:56 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture number_of_tx_rx_ports setup ends -------------------- 14:17:56 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture setup_ports_and_dut setup starts -------------------- 14:17:56 helper.setup_ports_and_dut L0111 INFO | Running test for testbed subtype: single-dut-multi-asic-aaa 14:17:57 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture setup_ports_and_dut setup ends -------------------- 14:17:57 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture reboot_duts_and_disable_wd setup starts -------------------- 14:17:58 sonic.get_asic_name L1797 INFO | asic: unknown 14:17:58 helper.skip_warm_reboot L0045 INFO | Reboot type cold is supported on broadcom switches 14:17:58 sonic.get_asic_name L1797 INFO | asic: unknown 14:17:58 helper.skip_warm_reboot L0045 INFO | Reboot type cold is supported on broadcom switches 14:18:01 helper.save_config_and_reboot L0210 INFO | Issuing a cold reboot on the dut ixr-aaa-14 14:18:04 reboot.reboot L0271 INFO | Reboot ixr-aaa-14: wait[120], timeout[300] 14:18:04 reboot.reboot L0273 INFO | DUT ixr-aaa-14 create a file /dev/shm/test_reboot before rebooting 14:18:05 reboot.collect_console_log L0566 INFO | start: collect console log 14:18:05 dut_utils.creds_on_dut L0471 INFO | dut ixr-aaa-14 belongs to groups ['ixia-sonic', 'sonic', 'sonic_aaa', 'fanout'] 14:18:05 dut_utils.creds_on_dut L0496 INFO | skip empty var file /data/sonic-mgmt/tests/common/helpers/../../../ansible/group_vars/all/corefile_uploader.yml 14:18:05 transport._log L1873 INFO | Connected (version 2.0, client OpenSSH_9.2p1) 14:18:07 transport._log L1873 INFO | Auth banner: b'Debian GNU/Linux 12 \\n \\l\n\n' 14:18:07 transport._log L1873 INFO | Authentication (password) failed. 14:18:07 transport._log L1873 INFO | Connected (version 2.0, client OpenSSH_9.2p1) 14:18:07 transport._log L1873 INFO | Auth banner: b'Debian GNU/Linux 12 \\n \\l\n\n' 14:18:07 transport._log L1873 INFO | Authentication (password) successful! 14:18:08 reboot.try_create_dut_console L0559 WARNING| Fail to create dut console. Please check console config or if console works ro not. 'ManagementIp' 14:18:08 reboot.collect_console_log L0576 WARNING| dut console is not ready, we cannot get log by console 14:18:10 reboot.wait_for_shutdown L0164 INFO | waiting for ssh to drop on ixr-aaa-14 14:18:10 reboot.execute_reboot_command L0205 INFO | rebooting ixr-aaa-14 with command "reboot" 14:18:28 reboot.wait_for_startup L0185 INFO | waiting for ssh to startup on ixr-aaa-14 14:19:56 reboot.wait_for_startup L0197 INFO | ssh has started up on ixr-aaa-14 14:19:56 reboot.reboot L0300 INFO | waiting for switch ixr-aaa-14 to initialize 14:24:22 processes_utils.wait_critical_processes L0078 INFO | Wait until all critical processes are healthy in 600 sec 14:24:22 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 14:24:30 reboot.reboot L0330 INFO | cold reboot finished on ixr-aaa-14 14:24:31 reboot.reboot L0333 INFO | DUT ixr-aaa-14 up since 2025-05-01 14:19:23.320000 14:24:31 helper.save_config_and_reboot L0214 INFO | Wait until the system is stable 14:24:37 sonic_asic.check_bgp_session_state L0714 INFO | bgp neighbors that match the state: ['3.3.3.2', '3333::3:2'] on namespace asic0 14:24:37 sonic_asic.check_bgp_session_state L0715 INFO | bgp neighbors to be checked on the state: [] on namespace asic0 14:24:38 sonic_asic.check_bgp_session_state L0714 INFO | bgp neighbors that match the state: ['3.3.3.1', '3333::3:1'] on namespace asic1 14:24:38 sonic_asic.check_bgp_session_state L0715 INFO | bgp neighbors to be checked on the state: [] on namespace asic1 14:24:38 parallel.on_terminate L0085 INFO | process save_config_and_reboot--<MultiAsicSonicHost ixr-aaa-14> terminated with exit code None 14:24:38 parallel.parallel_run L0221 INFO | Completed running processes for target "save_config_and_reboot" in 0:06:39.645613 seconds 14:24:44 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture reboot_duts_and_disable_wd setup ends -------------------- 14:24:44 __init__.pytest_runtest_setup L0034 INFO | collect memory before test test_pfc_pause_multi_lossless_prio_reboot[multidut_port_info0-cold] 14:24:44 __init__.pytest_runtest_setup L0054 INFO | Before test: collected memory_values {'before_test': {}, 'after_test': {}} -------------------------- curtailed output ----------------------- 14:28:16 traffic_generation.run_traffic L0465 INFO | In-flight traffic statistics for flows: ['Test Flow Prio 3', 'Test Flow Prio 4', 'Background Flow Prio 1', 'Background Flow Prio 5', 'Background Flow Prio 6', 'Background Flow Prio 2', 'Background Flow Prio 0'] 14:28:16 traffic_generation.run_traffic L0466 INFO | In-flight TX frames: [68215, 68215, 116379310, 116379310, 116379310, 116379310, 116379310] 14:28:16 traffic_generation.run_traffic L0467 INFO | In-flight RX frames: [0, 0, 116379310, 116379310, 116379310, 116379310, 116379310] 14:28:49 traffic_generation.run_traffic L0468 INFO | DUT polling complete 14:28:49 traffic_generation.run_traffic L0479 INFO | Checking if all flows have stopped. Attempt #1 14:28:50 traffic_generation.run_traffic L0486 INFO | All test and background traffic flows stopped 14:28:52 traffic_generation.run_traffic L0514 INFO | Dumping per-flow statistics 14:28:53 traffic_generation.run_traffic L0516 INFO | Stopping transmit on all remaining flows 14:29:00 snappi_api.info L1132 INFO | Flows stop 6.248s PASSED T2 Verification: AzDevOps@7c3002ea4994:/data/tests$ date;python3 -m pytest --inventory ../ansible/ixia-sonic --host-pattern board73,board74 --testbed ixre-chassis17-t2 --testbed_file ../ansible/testbed.csv --show-capture=stdout --log-cli-level info --showlocals -ra --allow_recover --junit-xml=/tmp/pfc/p.xml --skip_sanity --log-file=/tmp/pfc/p.log snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py -k reboot --pdb Wed Apr 30 20:44:41 UTC 2025 --------------- curtailed output ---------------- snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py::test_pfc_pause_single_lossless_prio_reboot[multidut_port_info0-cold-board71|3] --------------------------------------------------------------------------------------------------- live log setup ---------------------------------------------------------------------------------------------------- 20:45:40 __init__.set_default L0053 INFO | Completeness level not set during test execution. Setting to default level: CompletenessLevel.basic 20:45:40 __init__.check_test_completeness L0151 INFO | Test has no defined levels. Continue without test completeness checks 20:45:40 __init__.loganalyzer L0067 INFO | Log analyzer is disabled 20:45:40 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup starts -------------------- 20:45:40 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 setup ends -------------------- 20:45:40 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture multidut_port_info setup starts -------------------- 20:45:40 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture multidut_port_info setup ends -------------------- 20:45:40 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture number_of_tx_rx_ports setup starts -------------------- 20:45:40 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture number_of_tx_rx_ports setup ends -------------------- 20:45:40 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture setup_ports_and_dut setup starts -------------------- 20:45:40 helper.setup_ports_and_dut L0115 INFO | Running test for testbed subtype: multi-dut-long-to-short-link 20:45:43 snappi_fixtures.__intf_config_multidut L0858 INFO | Configuring Dut: board73 with port Ethernet16 with IP 20.1.1.2/31 20:45:43 snappi_fixtures.__intf_config_multidut L0878 INFO | Adding ip:20.1.1.2 on port:Ethernet16 on DUT:board73 20:45:44 snappi_fixtures.__intf_config_multidut L0858 INFO | Configuring Dut: board74 with port Ethernet0 with IP 20.1.1.0/31 20:45:44 snappi_fixtures.__intf_config_multidut L0878 INFO | Adding ip:20.1.1.0 on port:Ethernet0 on DUT:board74 20:45:45 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture setup_ports_and_dut setup ends -------------------- 20:45:45 __init__._fixture_generator_decorator L0081 INFO | -------------------- fixture reboot_duts_and_disable_wd setup starts -------------------- 20:45:46 sonic.get_asic_name L1778 INFO | asic: unknown 20:45:46 helper.skip_warm_reboot L0049 INFO | Reboot type cold is supported on broadcom switches 20:45:46 sonic.get_asic_name L1778 INFO | asic: unknown 20:45:46 helper.skip_warm_reboot L0049 INFO | Reboot type cold is supported on broadcom switches 20:45:49 helper.save_config_and_reboot L0408 INFO | Issuing a cold reboot on the dut board74 20:45:49 helper.save_config_and_reboot L0408 INFO | Issuing a cold reboot on the dut board73 20:45:52 reboot.reboot L0269 INFO | Reboot board74: wait[900], timeout[600] 20:45:52 reboot.reboot L0271 INFO | DUT board74 create a file /dev/shm/test_reboot before rebooting 20:45:52 reboot.reboot L0269 INFO | Reboot board73: wait[900], timeout[600] 20:45:52 reboot.reboot L0271 INFO | DUT board73 create a file /dev/shm/test_reboot before rebooting 20:45:54 reboot.wait_for_shutdown L0162 INFO | waiting for ssh to drop on board74 20:45:54 reboot.execute_reboot_command L0202 INFO | rebooting board74 with command "reboot" 20:45:54 reboot.wait_for_shutdown L0162 INFO | waiting for ssh to drop on board73 20:45:54 reboot.execute_reboot_command L0202 INFO | rebooting board73 with command "reboot" 20:46:15 reboot.wait_for_startup L0183 INFO | waiting for ssh to startup on board74 20:46:16 reboot.wait_for_startup L0183 INFO | waiting for ssh to startup on board73 20:48:38 reboot.wait_for_startup L0194 INFO | ssh has started up on board73 20:48:38 reboot.reboot L0288 INFO | waiting for switch board73 to initialize 20:48:40 reboot.wait_for_startup L0194 INFO | ssh has started up on board74 20:48:40 reboot.reboot L0288 INFO | waiting for switch board74 to initialize 20:52:24 processes_utils.wait_critical_processes L0079 INFO | Wait until all critical processes are healthy in 600 sec 20:52:24 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:52:25 processes_utils.wait_critical_processes L0079 INFO | Wait until all critical processes are healthy in 600 sec 20:52:25 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:52:32 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 20:52:32 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 20:52:32 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 20:52:32 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 20:52:52 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:52:52 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:52:59 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 20:52:59 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 20:53:00 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 20:53:00 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 20:53:20 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:53:20 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 20:53:27 reboot.reboot L0318 INFO | cold reboot finished on board73 20:53:28 reboot.reboot L0318 INFO | cold reboot finished on board74 20:53:28 reboot.reboot L0321 INFO | DUT board73 up since 2025-04-30 20:47:22.580000 20:53:28 reboot.reboot L0321 INFO | DUT board74 up since 2025-04-30 20:47:19.270000 20:53:29 helper.save_config_and_reboot L0412 INFO | Wait until the system is stable 20:53:29 helper.save_config_and_reboot L0412 INFO | Wait until the system is stable 20:53:35 sonic_asic.check_bgp_session_state L0692 INFO | bgp neighbors that match the state: ['3.3.3.1', '3.3.3.2', '3.3.3.6', '3.3.3.8', '3.3.3.12', '3.3.3.14', '3.3.3.20', '3333::3:1', '3333::3:2', '3333::3:6', '3333::3:8', '3333::3:12', '3333::3:14', '3333::3:20'] on namespace asic0 20:53:35 sonic_asic.check_bgp_session_state L0693 INFO | bgp neighbors to be checked on the state: [] on namespace asic0 20:53:35 sonic_asic.check_bgp_session_state L0692 INFO | bgp neighbors that match the state: ['3.3.3.1', '3.3.3.2', '3.3.3.6', '3.3.3.8', '3.3.3.14', '3.3.3.18', '3.3.3.20', '3333::3:1', '3333::3:2', '3333::3:6', '3333::3:8', '3333::3:14', '3333::3:18', '3333::3:20'] on namespace asic0 20:53:35 sonic_asic.check_bgp_session_state L0693 INFO | bgp neighbors to be checked on the state: [] on namespace asic0 20:53:36 sonic_asic.check_bgp_session_state L0692 INFO | bgp neighbors that match the state: ['3.3.3.1', '3.3.3.2', '3.3.3.6', '3.3.3.8', '3.3.3.12', '3.3.3.14', '3.3.3.18', '3333::3:1', '3333::3:2', '3333::3:6', '3333::3:8', '3333::3:12', '3333::3:14', '3333::3:18'] on namespace asic1 20:53:36 sonic_asic.check_bgp_session_state L0693 INFO | bgp neighbors to be checked on the state: [] on namespace asic1 20:53:36 parallel.on_terminate L0085 INFO | process save_config_and_reboot--<MultiAsicSonicHost board74> terminated with exit code None 20:53:36 sonic_asic.check_bgp_session_state L0692 INFO | bgp neighbors that match the state: ['3.3.3.1', '3.3.3.2', '3.3.3.6', '3.3.3.8', '3.3.3.12', '3.3.3.18', '3.3.3.20', '3333::3:1', '3333::3:2', '3333::3:6', '3333::3:8', '3333::3:12', '3333::3:18', '3333::3:20'] on namespace asic1 20:53:36 sonic_asic.check_bgp_session_state L0693 INFO | bgp neighbors to be checked on the state: [] on namespace asic1 20:53:36 parallel.on_terminate L0085 INFO | process save_config_and_reboot--<MultiAsicSonicHost board73> terminated with exit code None 20:53:36 parallel.parallel_run L0221 INFO | Completed running processes for target "save_config_and_reboot" in 0:07:49.938416 seconds 20:53:50 __init__._fixture_generator_decorator L0085 INFO | -------------------- fixture reboot_duts_and_disable_wd setup ends -------------------- --------------- curtailed output ---------------- PASSED [ 8%] -------------------------------------------------------------------------------------------------- live log teardown -------------------------------------------------------------------------------------------------- 20:57:53 __init__._fixture_generator_decorator L0093 INFO | -------------------- fixture reboot_duts_and_disable_wd teardown starts -------------------- 20:58:06 config_reload.config_reload L0145 INFO | reloading config_db 21:02:39 processes_utils.wait_critical_processes L0079 INFO | Wait until all critical processes are healthy in 600 sec 21:02:39 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 21:02:46 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 21:02:46 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 21:03:06 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 21:03:14 config_reload.config_reload L0145 INFO | reloading config_db 21:07:44 processes_utils.wait_critical_processes L0079 INFO | Wait until all critical processes are healthy in 600 sec 21:07:44 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 21:07:52 processes_utils.get_critical_processes_s L0035 INFO | The status of checking process in container 'lldp0' is: False 21:07:52 processes_utils.get_critical_processes_s L0037 INFO | The processes not running in container 'lldp0' are: '['lldp-syncd', 'lldpmgrd']' 21:08:12 processes_utils._all_critical_processes_ L0045 INFO | Check critical processes status 21:08:19 __init__._fixture_generator_decorator L0102 INFO | -------------------- fixture reboot_duts_and_disable_wd teardown ends -------------------- 21:08:19 __init__._fixture_generator_decorator L0093 INFO | -------------------- fixture setup_ports_and_dut teardown starts -------------------- 21:08:22 snappi_fixtures.__intf_config_multidut L0858 INFO | Configuring Dut: board73 with port Ethernet16 with IP 20.1.1.2/31 21:08:22 snappi_fixtures.__intf_config_multidut L0880 INFO | Removing ip:20.1.1.2 on port:Ethernet16 on DUT:board73 21:08:23 snappi_fixtures.__intf_config_multidut L0858 INFO | Configuring Dut: board74 with port Ethernet0 with IP 20.1.1.0/31 21:08:23 snappi_fixtures.__intf_config_multidut L0880 INFO | Removing ip:20.1.1.0 on port:Ethernet0 on DUT:board74 21:08:24 __init__._fixture_generator_decorator L0102 INFO | -------------------- fixture setup_ports_and_dut teardown ends -------------------- 21:08:24 __init__._fixture_generator_decorator L0093 INFO | -------------------- fixture number_of_tx_rx_ports teardown starts -------------------- 21:08:24 __init__._fixture_generator_decorator L0102 INFO | -------------------- fixture number_of_tx_rx_ports teardown ends -------------------- 21:08:24 __init__._fixture_generator_decorator L0093 INFO | -------------------- fixture multidut_port_info teardown starts -------------------- 21:08:24 __init__._fixture_generator_decorator L0102 INFO | -------------------- fixture multidut_port_info teardown ends -------------------- 21:08:24 __init__._fixture_generator_decorator L0093 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 teardown starts -------------------- 21:08:24 __init__._fixture_generator_decorator L0102 INFO | -------------------- fixture ignore_route_check_for_cisco_8000 teardown ends -------------------- --------------- curtailed output ---------------- ======================================================================= 8 passed, 16 skipped, 20 deselected, 71 warnings in 10116.17s (2:48:36) ======================================================================= INFO:root:Can not get Allure report URL. Please check logs co-authorized by: jianquanye@microsoft.com

sonic-net#18886) Description of PR Summary: Fixes # (issue)sonic-net#13769 Type of change Bug fix Testbed and Framework(new/improvement) New Test case Skipped for non-supported platforms Test case improvement Back port request 202205 202305 202311 202405 202411 202505 Approach What is the motivation for this PR? To support infra changes in snappi tests introduced by this Pull Request - sonic-net#15069 How did you do it? We don't need the setup_ports_and_dut now and we can simply call the snappi_testbed_config in the test itself and iterate through the available ports. How did you verify/test it? Any platform specific information? Supported testbed topology if it's a new test case? Documentation OUTPUT snappi_tests/pfc/test_pfc_pause_lossy_with_snappi.py::test_pfc_pause_single_lossy_prio[multidut_port_info0-sonic-s6100-dut1|0-400.0-single_linecard_single_asic] ----------------------------------------------------------------------------------------------------------------------------------------- live log setup ------------------------------------------------------------------------------------------------------------------------------------------ 16:01:24 init.set_default L0053 INFO | Completeness level not set during test execution. Setting to default level: CompletenessLevel.basic 16:01:24 init.check_test_completeness L0151 INFO | Test has no defined levels. Continue without test completeness checks 16:01:24 conftest.enhance_inventory L0313 INFO | Inventory file: ['../ansible/snappi-sonic'] 16:01:27 ptfhost_utils.run_icmp_responder_session L0310 INFO | Skip running icmp_responder at session level, it is only for dualtor testbed with active-active mux ports. 16:01:27 init._sanity_check L0431 INFO | Skip sanity check according to command line argument 16:01:27 conftest.collect_before_test L2695 INFO | Dumping Disk and Memory Space information before test on sonic-s6100-dut1 16:01:28 conftest.collect_before_test L2699 INFO | Collecting core dumps before test on sonic-s6100-dut1 16:01:28 conftest.collect_before_test L2708 INFO | Collecting running config before test on sonic-s6100-dut1 16:01:30 conftest.temporarily_disable_route_check L2974 INFO | Skipping temporarily_disable_route_check fixture 16:01:30 conftest.generate_params_dut_hostname L1498 INFO | Using DUTs ['sonic-s6100-dut1'] in testbed 'vms-snappi-sonic' 16:01:30 conftest.set_rand_one_dut_hostname L0647 INFO | Randomly select dut sonic-s6100-dut1 for testing 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture enable_packet_aging_after_test setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture enable_packet_aging_after_test setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture rand_lossless_prio setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture rand_lossless_prio setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture rand_lossy_prio setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture rand_lossy_prio setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture start_pfcwd_after_test setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture start_pfcwd_after_test setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture disable_voq_watchdog setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture disable_voq_watchdog setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture number_of_tx_rx_ports setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture number_of_tx_rx_ports setup ends -------------------- 16:01:30 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_api_serv_ip setup starts -------------------- 16:01:30 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_api_serv_ip setup ends -------------------- 16:01:30 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_api_serv_port setup starts -------------------- 16:01:30 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_api_serv_port setup ends -------------------- 16:01:30 init._fixture_generator_decorator L0081 INFO | -------------------- fixture snappi_api setup starts -------------------- 16:01:30 init._fixture_generator_decorator L0085 INFO | -------------------- fixture snappi_api setup ends -------------------- 16:01:31 conftest.rand_one_dut_front_end_hostname L0683 INFO | Randomly select dut sonic-s6100-dut1 for testing 16:01:31 init._fixture_func_decorator L0069 INFO | -------------------- fixture prio_dscp_map setup starts -------------------- 16:01:32 init._fixture_func_decorator L0076 INFO | -------------------- fixture prio_dscp_map setup ends -------------------- 16:01:32 init._fixture_func_decorator L0069 INFO | -------------------- fixture all_prio_list setup starts -------------------- 16:01:32 init._fixture_func_decorator L0076 INFO | -------------------- fixture all_prio_list setup ends -------------------- 16:01:32 init._fixture_func_decorator L0069 INFO | -------------------- fixture lossless_prio_list setup starts -------------------- 16:01:33 init._fixture_func_decorator L0076 INFO | -------------------- fixture lossless_prio_list setup ends -------------------- 16:01:33 init._fixture_func_decorator L0069 INFO | -------------------- fixture lossy_prio_list setup starts -------------------- 16:01:33 init._fixture_func_decorator L0076 INFO | -------------------- fixture lossy_prio_list setup ends -------------------- 16:01:33 init._fixture_func_decorator L0069 INFO | -------------------- fixture get_snappi_ports setup starts -------------------- 16:01:34 conftest.generate_port_lists L1590 INFO | Generate dut_port_map: {'sonic-s6100-dut1': ['sonic-s6100-dut1|Ethernet0', 'sonic-s6100-dut1|Ethernet8', 'sonic-s6100-dut1|Ethernet16', 'sonic-s6100-dut1|Ethernet24']} 16:01:34 conftest.generate_port_lists L1613 INFO | Generate port_list: ['sonic-s6100-dut1|Ethernet0', 'sonic-s6100-dut1|Ethernet8', 'sonic-s6100-dut1|Ethernet16', 'sonic-s6100-dut1|Ethernet24'] 16:01:34 init._fixture_func_decorator L0069 INFO | -------------------- fixture get_snappi_ports_single_dut setup starts -------------------- 16:01:34 init._fixture_func_decorator L0076 INFO | -------------------- fixture get_snappi_ports_single_dut setup ends -------------------- 16:01:34 init._fixture_func_decorator L0076 INFO | -------------------- fixture get_snappi_ports setup ends -------------------- 16:01:34 init._fixture_func_decorator L0069 INFO | -------------------- fixture snappi_port_selection setup starts -------------------- 16:01:34 init._fixture_func_decorator L0076 INFO | -------------------- fixture snappi_port_selection setup ends -------------------- 16:01:34 init.loganalyzer L0074 INFO | Log analyzer is disabled 16:01:34 init.memory_utilization L0125 INFO | Hostname: sonic-s6100-dut1, Hwsku: Accton-AS9716-32D, Platform: x86_64-accton_as9716_32d-r0 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=monit, cmd=sudo monit status, memory_params={'memory_usage': {'memory_increase_threshold': {'type': 'value', 'value': 10}, 'memory_high_threshold': {'type': 'value', 'value': 70}}}, memory_check=<function parse_monit_status_output at 0x7f9baa8983a0> 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=top, cmd=top -b -n 1, memory_params={'bgpd': {'memory_increase_threshold': {'type': 'value', 'value': 128}, 'memory_high_threshold': None}, 'zebra': {'memory_increase_threshold': {'type': 'value', 'value': 64}, 'memory_high_threshold': None}}, memory_check=<function parse_top_output at 0x7f9baa88cd30> 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=free, cmd=free -m, memory_params={'used': {'memory_increase_threshold': {'type': 'percentage', 'value': '20%'}, 'memory_high_threshold': None}}, memory_check=<function parse_free_output at 0x7f9baa898310> 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=docker, cmd=docker stats --no-stream, memory_params={'snmp': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 4}}, 'pmon': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 8}}, 'lldp': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 4}}, 'gnmi': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 6}}, 'radv': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 3}}, 'syncd': {'memory_increase_threshold': {'type': 'value', 'value': 5}, 'memory_high_threshold': {'type': 'value', 'value': 18}}, 'bgp': {'memory_increase_threshold': {'type': 'value', 'value': 4}, 'memory_high_threshold': {'type': 'value', 'value': 14}}, 'teamd': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 5}}, 'swss': {'memory_increase_threshold': {'type': 'value', 'value': 3}, 'memory_high_threshold': {'type': 'value', 'value': 8}}, 'database': {'memory_increase_threshold': {'type': 'value', 'value': 2}, 'memory_high_threshold': {'type': 'value', 'value': 6}}}, memory_check=<function parse_docker_stats_output at 0x7f9baa898430> 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=frr_bgp, cmd=vtysh -c "show memory bgp", memory_params={'used': {'memory_increase_threshold': [{'type': 'percentage', 'value': '50%'}, {'type': 'value', 'value': 32}], 'memory_high_threshold': {'type': 'value', 'value': 128}}}, memory_check=<function parse_frr_memory_output at 0x7f9baa8984c0> 16:01:34 memory_utilization.register_command L0023 INFO | Registering command: name=frr_zebra, cmd=vtysh -c "show memory zebra", memory_params={'used': {'memory_increase_threshold': [{'type': 'percentage', 'value': '50%'}, {'type': 'value', 'value': 16}], 'memory_high_threshold': {'type': 'value', 'value': 128}}}, memory_check=<function parse_frr_memory_output at 0x7f9baa8984c0> 16:01:34 init._fixture_generator_decorator L0081 INFO | -------------------- fixture multidut_port_info setup starts -------------------- 16:01:34 init._fixture_generator_decorator L0085 INFO | -------------------- fixture multidut_port_info setup ends -------------------- 16:01:34 init._fixture_generator_decorator L0081 INFO | -------------------- fixture setup_ports_and_dut setup starts -------------------- 16:01:34 helper.setup_ports_and_dut L0152 INFO | Running test for testbed subtype: single-dut-single-asic 16:01:34 init._fixture_generator_decorator L0085 INFO | -------------------- fixture setup_ports_and_dut setup ends -------------------- 16:01:34 init._fixture_func_decorator L0069 INFO | -------------------- fixture tgen_port_info setup starts -------------------- 16:01:35 init._fixture_func_decorator L0076 INFO | -------------------- fixture tgen_port_info setup ends -------------------- 16:01:40 memory_utilization.execute_command L0039 WARNING| Command 'vtysh -c "show memory bgp"' returned no output 16:01:40 memory_utilization.parse_frr_memory_outp L0481 WARNING| Empty output for FRR memory command, returning empty values 16:01:41 memory_utilization.execute_command L0039 WARNING| Command 'vtysh -c "show memory zebra"' returned no output 16:01:41 memory_utilization.parse_frr_memory_outp L0481 WARNING| Empty output for FRR memory command, returning empty values 16:01:41 init.pytest_runtest_setup L0061 INFO | Before test: collected memory_values {'before_test': {'sonic-s6100-dut1': {'monit': {'memory_usage': 7.8}, 'top': {}, 'free': {'used': 1988}, 'docker': {'radv': '0.24', 'syncd': '3.76', 'teamd': '0.26', 'swss': '0.60', 'pmon': '0.76', 'database': '0.88', 'bgp': '0.03', 'lldp': '0.10'}, 'frr_bgp': {}, 'frr_zebra': {}}}, 'after_test': {'sonic-s6100-dut1': {}}} ------------------------------------------------------------------------------------------------------------------------------------------ live log call ------------------------------------------------------------------------------------------------------------------------------------------ 16:01:54 connection._warn L0336 WARNING| Verification of certificates is disabled 16:01:54 connection._info L0333 INFO | Determining the platform and rest_port using the 10.36.79.8 address... 16:01:54 connection._warn L0336 WARNING| Unable to connect to http://10.36.79.8:443. 16:01:55 connection._info L0333 INFO | Connection established to https://10.36.79.8:443 on linux 16:02:14 connection._info L0333 INFO | Using IxNetwork api server version 10.25.2406.6 16:02:14 connection._info L0333 INFO | User info IxNetwork/ixnetworkweb/admin-162-10063 16:02:16 snappi_api.info L1488 INFO | snappi-1.31.1 16:02:16 snappi_api.info L1488 INFO | snappi_ixnetwork-1.31.2 16:02:16 snappi_api.info L1488 INFO | ixnetwork_restpy-1.7.0 16:02:16 snappi_api.info L1488 INFO | Config validation 0.020s 16:02:19 snappi_api.info L1488 INFO | Ports configuration 1.715s 16:02:19 snappi_api.info L1488 INFO | Captures configuration 0.200s 16:02:22 snappi_api.info L1488 INFO | Add location hosts [10.36.79.8] 2.336s 16:02:24 snappi_api.info L1488 INFO | Location hosts ready [10.36.79.8] 2.482s 16:02:25 snappi_api.info L1488 INFO | Speed conversion is not require for (port.name, speed) : [('Port 0', 'aresOneOneByFourHundredGigNonFanOut'), ('Port 1', 'aresOneOneByFourHundredGigNonFanOut')] 16:02:25 snappi_api.info L1488 INFO | Aggregation mode speed change 0.412s 16:02:25 snappi_api.info L1488 INFO | Location preemption [10.36.79.8/3, 10.36.79.8/1] 0.143s 16:02:42 snappi_api.info L1488 INFO | Location connect [Port 0, Port 1] 16.540s 16:02:42 snappi_api.info L1488 INFO | Location state check [Port 0, Port 1] 0.363s 16:02:42 snappi_api.info L1488 INFO | Location configuration 23.254s 16:02:46 snappi_api.info L1488 INFO | Layer1 configuration 3.795s 16:02:46 snappi_api.info L1488 INFO | Lag Configuration 0.157s 16:02:47 snappi_api.info L1488 INFO | Convert device config : 0.325s 16:02:47 snappi_api.info L1488 INFO | Create IxNetwork device config : 0.000s 16:02:48 snappi_api.info L1488 INFO | Push IxNetwork device config : 0.963s 16:02:48 snappi_api.info L1488 INFO | Devices configuration 1.391s 16:02:56 snappi_api.info L1488 INFO | Flows configuration 8.034s 16:03:03 snappi_api.info L1488 INFO | Start interfaces 7.636s 16:03:04 snappi_api.info L1488 INFO | IxNet - The Traffic Item was modified. Please perform a Traffic Generate to update the associated traffic Flow Groups 16:03:04 traffic_generation.run_traffic L0433 INFO | Wait for Arp to Resolve ... 16:03:10 traffic_generation.run_traffic L0456 INFO | Starting transmit on all flows ... 16:03:14 snappi_api.info L1488 INFO | Flows generate/apply 3.528s 16:03:27 snappi_api.info L1488 INFO | Flows clear statistics 12.289s 16:03:27 snappi_api.info L1488 INFO | Captures start 0.000s 16:03:30 snappi_api.info L1488 INFO | Flows start 2.733s 16:03:30 traffic_generation.run_traffic L0472 INFO | Polling DUT for traffic statistics for 23 seconds ... 16:03:57 traffic_generation.run_traffic L0491 INFO | Polling TGEN for in-flight traffic statistics... 16:03:59 traffic_generation.run_traffic L0496 INFO | In-flight traffic statistics for flows: ['Test Flow Prio 0', 'Background Flow Prio 1', 'Background Flow Prio 3', 'Background Flow Prio 4', 'Background Flow Prio 5', 'Background Flow Prio 6', 'Background Flow Prio 2'] 16:03:59 traffic_generation.run_traffic L0497 INFO | In-flight TX frames: [409482758, 63697318, 63697318, 63697318, 63697318, 63697318, 63697318] 16:03:59 traffic_generation.run_traffic L0498 INFO | In-flight RX frames: [409482758, 63697318, 63697318, 63697318, 63697318, 63697318, 63697318] 16:04:16 traffic_generation.run_traffic L0499 INFO | DUT polling complete 16:04:16 traffic_generation.run_traffic L0510 INFO | Checking if all flows have stopped. Attempt #1 16:04:18 traffic_generation.run_traffic L0517 INFO | All test and background traffic flows stopped 16:04:20 traffic_generation.run_traffic L0540 INFO | Dumping per-flow statistics 16:04:21 traffic_generation.run_traffic L0542 INFO | Stopping transmit on all remaining flows 16:04:26 snappi_api.info L1488 INFO | Flows stop 5.387s PASSED

What is the motivation for this PR? The current telemetry framework has many serious problems: Hard to import, because it is outside of the tests folder No implementation, hard to try out Hard to use and extend, because the interface is too primitive No tests and can break easily How did you do it? This PR add a few things to improve the current telemetry framework: Add new design doc with example code provided in the doc. Implement both TS (timeseries) and DB (database) reporter, so we can try the feature easily. How did you verify/test it? Run all tests locally and passed. Any platform specific information? N/A. Fix TS reporters. Fix TSRepoter. Fix TS reporter. minor fix. Fix example. Reverse relationship of metrics and reporter to support more types of metrics in future. Remove bydesign not working test. Fix example. Update tests. Update TS reporter and DB repoter. Update minor things. Remove no required code. Revert unexpected change. Rename and update doc. * Get os version and job id (#1) Get os version and elastictest job id from correct place. * Revert OS version change. * Remove duplicated mock reporter fixture. --------- Co-authored-by: Yutong Zhang <90831468+yutongzhang-microsoft@users.noreply.github.com>

What is the motivation for this PR? The current telemetry framework has many serious problems: Hard to import, because it is outside of the tests folder No implementation, hard to try out Hard to use and extend, because the interface is too primitive No tests and can break easily How did you do it? This PR add a few things to improve the current telemetry framework: Add new design doc with example code provided in the doc. Implement both TS (timeseries) and DB (database) reporter, so we can try the feature easily. How did you verify/test it? Run all tests locally and passed. Any platform specific information? N/A. Fix TS reporters. Fix TSRepoter. Fix TS reporter. minor fix. Fix example. Reverse relationship of metrics and reporter to support more types of metrics in future. Remove bydesign not working test. Fix example. Update tests. Update TS reporter and DB repoter. Update minor things. Remove no required code. Revert unexpected change. Rename and update doc. * Get os version and job id (#1) Get os version and elastictest job id from correct place. * Revert OS version change. * Remove duplicated mock reporter fixture. --------- Co-authored-by: Yutong Zhang <90831468+yutongzhang-microsoft@users.noreply.github.com> Signed-off-by: selldinesh <dinesh.sellappan@keysight.com>

…nter and global_pause test-script (sonic-net#22490) Description of PR Added support for tgen_port_info in: tests/snappi_tests/pfc/test_global_pause_with_snappi.py tests/snappi_tests/pfc/test_tx_drop_counter_with_snappi.py Summary: Fixes # (issue) Type of change Bug fix Testbed and Framework(new/improvement) New Test case Skipped for non-supported platforms Test case improvement Back port request 202205 202305 202311 202405 202411 202505 202511 Approach What is the motivation for this PR? The tgen_port_info was added as part of Snappi test infra improvement, which enabled users to select between static (from variables.override.yml) and dynamic (select 100 and 400Gbps ports) ports. This was NOT included in test_tx_drop_counter and test_global_pause test-scripts under snappi_tests/pfc section. How did you do it? Imported the tgen_port_info from snappi_fixtures.py and removed any reference to old setup_dut_port function for both test-scripts. How did you verify/test it? Verification on 202511 is present in pull-request sonic-net#22380. Verification steps for master: azureuser@7e081020c2c7:/data/tests$ date;python3 -m pytest --inventory ../ansible/ixia-sonic --host-pattern ixre-egl-board73,ixre-egl-board74 --testbed ixre-chassis17-t2 --testbed_file ../ansible/testbed.csv --show-capture=stdout --log-cli-level info --showlocals -ra --allow_recover --junit-xml=/tmp/y.xml --skip_sanity --log-file=/tmp/y.log --topology multidut-tgen -cache-clear --disable_loganalyzer snappi_tests/pfc/test_global_pause_with_snappi.py --pdb Fri Feb 20 00:07:16 UTC 2026 ====================================================================================================================== test session starts ======================================================================================================================= platform linux -- Python 3.8.10, pytest-7.4.0, pluggy-1.5.0 ---- curtailed output ---- INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Config validation 0.014s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Ports configuration 1.261s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Captures configuration 0.116s ---- curtailed output ---- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:837 DUT polling complete INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:850 Checking if all flows have stopped. Attempt #1 INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:856 All test and background traffic flows stopped INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:894 Dumping per-flow statistics INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:899 Stopping transmit on all remaining flows INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Flows stop 5.353s PASSED [ 50%] ---- curtailed output ---- INFO tests.common.plugins.memory_utilization:__init__.py:64 Before test: collected memory_values {'before_test': {}, 'after_test': {}} ------------------------------------------------------------------------------------------------------------------------- live log call -------------------------------------------------------------------------------------------------------------------------- INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Config validation 0.014s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Ports configuration 1.059s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Captures configuration 0.110s ---- curtailed output ---- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:837 DUT polling complete INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:850 Checking if all flows have stopped. Attempt #1 INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:856 All test and background traffic flows stopped INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:894 Dumping per-flow statistics INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:899 Stopping transmit on all remaining flows INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Flows stop 5.514s PASSED [100%] ---- curtailed output ---- ----------------------------------------------------------------------------------------------------------------- generated xml file: /tmp/y.xml ----------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------------- live log sessionfinish --------------------------------------------------------------------------------------------------------------------- INFO root:__init__.py:67 Can not get Allure report URL. Please check logs =========================================================================================================== 2 passed, 9 warnings in 789.04s (0:13:09) ============================================================================================================ INFO:root:Can not get Allure report URL. Please check logs azureuser@7e081020c2c7:/data/tests$ date;python3 -m pytest --inventory ../ansible/ixia-sonic --host-pattern ixre-egl-board73,ixre-egl-board74 --testbed ixre-chassis17-t2 --testbed_file ../ansible/testbed.csv --show-capture=stdout --log-cli-level info --showlocals -ra --allow_recover --junit-xml=/tmp/y.xml --skip_sanity --log-file=/tmp/y.log --topology multidut-tgen -cache-clear --disable_loganalyzer snappi_tests/pfc/test_tx_drop_counter_with_snappi.py --pdb Fri Feb 20 00:21:03 UTC 2026 ---- curtailed output ---- INFO ixnetwork_restpy.connection:connection.py:329 User info IxNetwork/tgen-ixia-03/admin-112-3670867 INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 snappi-1.27.1 INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 snappi_ixnetwork-1.27.2 INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 ixnetwork_restpy-1.6.1 INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Config validation 0.000s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Ports configuration 0.213s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Captures configuration 0.122s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Aggregation mode speed change 0.000s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Location configuration 0.288s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Layer1 configuration 0.000s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Lag Configuration 0.061s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Convert device config : 0.155s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Create IxNetwork device config : 0.000s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Push IxNetwork device config : 0.093s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Devices configuration 0.299s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Flows configuration 0.120s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Start interfaces 0.155s INFO root:__init__.py:76 -------------------- fixture tgen_port_info setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture disable_pfcwd setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture disable_pfcwd setup ends -------------------- INFO root:conftest.py:3818 skip setup dualtor mux cables on non-dualtor testbed ---- curtailed output ---- INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Config validation 0.012s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Ports configuration 1.265s INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Captures configuration 0.112s ---- curtailed output ---- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:837 DUT polling complete INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:850 Checking if all flows have stopped. Attempt #1 INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:856 All test and background traffic flows stopped INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:894 Dumping per-flow statistics INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:899 Stopping transmit on all remaining flows ---- curtailed output ---- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:837 DUT polling complete INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:850 Checking if all flows have stopped. Attempt #1 INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:856 All test and background traffic flows stopped INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:894 Dumping per-flow statistics INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:899 Stopping transmit on all remaining flows INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Link State operation 0.052s INFO tests.snappi_tests.pfc.files.helper:helper.py:452 Snappi port Port 0 is set to DOWN INFO tests.snappi_tests.pfc.files.helper:helper.py:457 Sleeping for 90 seconds INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Link State operation 0.058s INFO tests.snappi_tests.pfc.files.helper:helper.py:469 Snappi port Port 0 is set to UP ---- curtailed output ---- INFO root:__init__.py:67 Can not get Allure report URL. Please check logs =========================================================================================================== 2 passed, 9 warnings in 906.71s (0:15:06) ============================================================================================================ INFO:root:Can not get Allure report URL. Please check logs Signed-off-by: amitpawa <amit.2.pawar@nokia.com> * snappi: issue-22363 removed multidut-port-info import from pfc tx_drop_counter testcase Signed-off-by: amitpawa <amit.2.pawar@nokia.com> --------- Signed-off-by: amitpawa <amit.2.pawar@nokia.com>

…ion (sonic-net#22504) Description of PR The tgen_port_info infra function in common/snappi_tests/snappi_fixtures.py is used to select port (dynamically or statically) for the test. During static port selection, the variables.override.yml file is used to select Rx and Tx port for the test. However, after the test, there was no explicit test clean_up code. This PR addresses it. Summary: Fixes sonic-net#20993 Type of change Bug fix Testbed and Framework(new/improvement) New Test case Skipped for non-supported platforms Test case improvement Back port request 202205 202305 202311 202405 202411 202505 202511 Approach What is the motivation for this PR? The tgen_port_info is used to select the Rx and Tx port for the test. In case of static port selection, the function returned snappi_dut_base_config(duthosts, snappi_ports, snappi_api, setup=True), and there was no explicit cleanup after the test. How did you do it? If the 'is_override' flag is true, the static port selection code is used to select Rx and Tx ports from variables.override.yml file. Instead of returning with function 'snappi_dut_base_config', 'yield' is called to ensure that clean-up is called at the end of the test. Once yield returns back to the test, then 'setup_dut_ports' is called with setup=False to ensure that clean-up happens after the test. How did you verify/test it? For verification of this changes on 202511 branch, please refer to PR sonic-net#22441 Verification of the PR on master with multi-dut setup: azureuser@7e081020c2c7:/data/tests$ date;python3 -m pytest --inventory ../ansible/ixia-sonic --host-pattern ixre-egl-board73,ixre-egl-board74 --testbed ixre-chassis17-t2 --testbed_file ../ansible/testbed.csv --show-capture=stdout --log-cli-level info --showlocals -ra --allow_recover --junit-xml=/tmp/y.xml --skip_sanity --log-file=/tmp/y.log --topology multidut-tgen -cache-clear --disable_loganalyzer snappi_tests/pfc/test_pfc_pause_lossless_with_snappi.py -k test_pfc_pause_multi_lossless_prio --pdb Fri Feb 20 14:26:57 UTC 2026 ================================================================================================= test session starts ================================================================================================= platform linux -- Python 3.8.10, pytest-7.4.0, pluggy-1.5.0 ----------- curtailed output ---------- INFO tests.conftest:conftest.py:691 Randomly select dut ixre-egl-board73 for testing INFO root:__init__.py:81 -------------------- fixture enable_packet_aging_after_test setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture enable_packet_aging_after_test setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture rand_lossless_prio setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture rand_lossless_prio setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture rand_lossy_prio setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture rand_lossy_prio setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture start_pfcwd_after_test setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture start_pfcwd_after_test setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture disable_voq_watchdog setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture disable_voq_watchdog setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture number_of_tx_rx_ports setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture number_of_tx_rx_ports setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture snappi_api_serv_ip setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture snappi_api_serv_ip setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture snappi_api_serv_port setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture snappi_api_serv_port setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture snappi_api setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture snappi_api setup ends -------------------- INFO tests.conftest:conftest.py:727 Randomly select dut ixre-egl-board74 for testing INFO root:__init__.py:69 -------------------- fixture prio_dscp_map setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture prio_dscp_map setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture all_prio_list setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture all_prio_list setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture lossless_prio_list setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture lossless_prio_list setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture lossy_prio_list setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture lossy_prio_list setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture get_snappi_ports setup starts -------------------- INFO root:__init__.py:69 -------------------- fixture get_snappi_ports_multi_dut setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture get_snappi_ports_multi_dut setup ends -------------------- INFO root:__init__.py:76 -------------------- fixture get_snappi_ports setup ends -------------------- INFO root:__init__.py:69 -------------------- fixture snappi_port_selection setup starts -------------------- INFO root:__init__.py:76 -------------------- fixture snappi_port_selection setup ends -------------------- INFO root:__init__.py:77 Log analyzer is disabled INFO root:__init__.py:81 -------------------- fixture disable_pfcwd setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture disable_pfcwd setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture tgen_port_info setup starts -------------------- ----------- curtailed output ---------- INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Start interfaces 0.164s INFO tests.common.snappi_tests.snappi_fixtures:snappi_fixtures.py:906 Found relevant portchannel interfaces INFO root:__init__.py:85 -------------------- fixture tgen_port_info setup ends -------------------- INFO root:conftest.py:3819 skip setup dualtor mux cables on non-dualtor testbed INFO tests.common.plugins.memory_utilization:__init__.py:64 Before test: collected memory_values {'before_test': {}, 'after_test': {}} ----------- curtailed output ---------- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:784 Polling DUT for traffic statistics for 23 seconds ... INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:803 Polling TGEN for in-flight traffic statistics... INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:824 In-flight traffic statistics for flows: ['Test Flow Prio 3', 'Test Flow Prio 4', 'Background Flow Prio 1', 'Background Flow Prio 5', 'Background Flow Prio 6', 'Background Flow Prio 2', 'Background Flow Prio 0'] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:825 In-flight TX frames: [68216, 68215, 81896551, 81896551, 81896551, 81896551, 81896551] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:826 In-flight RX frames: [0, 0, 81896551, 81896551, 81896551, 81896551, 81896551] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:832 In-flight traffic statistics for flows: ----------- curtailed output ---------- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:837 DUT polling complete INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:850 Checking if all flows have stopped. Attempt #1 INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:856 All test and background traffic flows stopped INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:894 Dumping per-flow statistics INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:899 Stopping transmit on all remaining flows INFO snappi_ixnetwork.snappi_api:snappi_api.py:1419 Flows stop 6.608s PASSED [ 50%] ----------- curtailed output ---------- INFO root:__init__.py:81 -------------------- fixture disable_pfcwd setup starts -------------------- INFO root:__init__.py:85 -------------------- fixture disable_pfcwd setup ends -------------------- INFO root:__init__.py:81 -------------------- fixture tgen_port_info setup starts -------------------- INFO tests.common.snappi_tests.snappi_fixtures:snappi_fixtures.py:906 Found relevant portchannel interfaces INFO root:__init__.py:85 -------------------- fixture tgen_port_info setup ends -------------------- INFO root:conftest.py:3819 skip setup dualtor mux cables on non-dualtor testbed ----------- curtailed output ---------- INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:784 Polling DUT for traffic statistics for 27 seconds ... INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:803 Polling TGEN for in-flight traffic statistics... INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:824 In-flight traffic statistics for flows: ['Test Flow Prio 3', 'Test Flow Prio 4', 'Background Flow Prio 1', 'Background Flow Prio 5', 'Background Flow Prio 6', 'Background Flow Prio 2', 'Background Flow Prio 0'] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:825 In-flight TX frames: [68221, 68222, 99137931, 99137931, 99137931, 99137931, 99137931] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:826 In-flight RX frames: [0, 0, 99137931, 99137931, 99137931, 99137931, 99137931] INFO tests.common.snappi_tests.traffic_generation:traffic_generation.py:832 In-flight traffic statistics for flows: ----------- curtailed output ---------- INFO tests.conftest:conftest.py:3097 Dumping Disk and Memory Space information after test on ixre-egl-board73 INFO tests.conftest:conftest.py:3097 Dumping Disk and Memory Space information after test on ixre-egl-board74 INFO tests.conftest:conftest.py:3101 Collecting core dumps after test on ixre-egl-board74 INFO tests.conftest:conftest.py:3101 Collecting core dumps after test on ixre-egl-board73 INFO tests.conftest:conftest.py:3112 Collecting running config after test on ixre-egl-board74 INFO tests.conftest:conftest.py:3112 Collecting running config after test on ixre-egl-board73 INFO tests.conftest:conftest.py:3259 Core dump and config check passed for test_pfc_pause_lossless_with_snappi.py ----------- curtailed output ---------- ----------------------------------------------------------------------------------------------- live log sessionfinish ------------------------------------------------------------------------------------------------ INFO root:__init__.py:67 Can not get Allure report URL. Please check logs ============================================================================== 2 passed, 14 deselected, 10 warnings in 808.66s (0:13:28) ============================================================================== INFO:root:Can not get Allure report URL. Please check logs Signed-off-by: amitpawa <amit.2.pawar@nokia.com>

adding bgp_test

033ae55

selldinesh changed the title ~~adding bgp_test~~ adding bgp_test for DPDP convergence case Feb 26, 2021

selldinesh requested review from ANISH-GOTTAPU, ankur-sheth, ashutshkumr and isgmano March 1, 2021 08:40

ANISH-GOTTAPU requested changes Mar 2, 2021

View reviewed changes

selldinesh added 6 commits March 4, 2021 00:48

review change 1

da19191

newline at the end

cd04f80

Removed redundant fixtures

90fe679

Adding bgp state check

968e687

indent

7c3c657

indent

50317ae

selldinesh mentioned this pull request May 20, 2024

Adding support for RDMA cases for pfcQueueGroupSize of 4 #12

Open

8 tasks

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

adding bgp_test for DPDP convergence case#1

adding bgp_test for DPDP convergence case#1
selldinesh wants to merge 7 commits intomasterfrom
bgp_test1

selldinesh commented Feb 26, 2021 •

edited

Loading

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

selldinesh commented Feb 26, 2021 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Description of PR

Type of change

Approach

What is the motivation for this PR?

How did you do it?

How did you verify/test it?

Any platform specific information?

Supported testbed topology if it's a new test case?

Documentation

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

selldinesh commented Feb 26, 2021 •

edited

Loading