Xamarin.Android

Xamarin.Android provides open-source bindings of the Android SDK for use with .NET managed languages such as C#.

Build Status

Platform	Status
OSS macOS
OSS Ubuntu

Downloads

Platform	Status
Commercial Xamarin.Android 7.1 (Cycle 9) for macOS
Commercial Xamarin.Android 7.3 (d15-2) for macOS
Commercial Xamarin.Android 7.3.99 (master) for macOS

Build Requirements

Building Xamarin.Android requires:

• Mono 4.4 or later
• The Java Development Kit (JDK)
• Autotools (autoconf, automake, etc.)
• xxd
• The Android SDK and NDK

The make prepare build step will check that all required dependencies are present. If you would like make prepare to automatically install required dependencies, set the $(AutoProvision) MSBuild property to True and (if necessary) set the $(AutoProvisionUsesSudo) property to True. (This is not supported on all operating systems.)

If $(AutoProvision) is False (the default) and a dependency is missing, then the build will fail and an error message will be displayed attempting to provide install instructions to obtain the missing dependency, e.g.:

error : Could not find required program '7za'. Please run: brew install 'p7zip'.

Mono MDK

Mono 4.4 or later is required to build on OS X and Linux.

(This is because the build system uses the XmlPeek task, which was first added in Mono 4.4.)

Java Development Kit

The Java Development Kit may be downloaded from the Oracle Java SE Downloads page.

Autotools

Autotools -- including autoconf and automake -- are required to build the Mono runtimes.

On OS X, autotools are distributed with Mono.framework.

If you run into issues regarding autoconf or automake try to install it with brew via:

brew install automake

xxd

The xxd utility is used to build src/monodroid. It is installed by default on OS X. Linux users may need to separately install it; it may be part of the vim-common package.

Android NDK, SDK

Note: A xamarin-android checkout maintains its own Android NDK + SDK to ensure consistent builds and build behavior, permitting reproducible builds and providing greater flexibility around when we need to perform Android SDK + NDK updates. The Android SDK and NDK are maintained by default via two directories in your home directory:

• $(AndroidToolchainCacheDirectory): Where downloaded files are cached. Defaults to the $HOME/android-archives directory.
• $(AndroidToolchainDirectory): Where the Android NDK and SDK are installed. Defaults to the $HOME/android-toolchain directory.

Developers may use these directories for their own use, but please DO NOT update or alter the contents of the $(AndroidToolchainDirectory), as that may prevent the xamarin-android build from working as expected.

The files that will be downloaded and installed are controlled by build-tools/android-toolchain/android-toolchain.projitems via the @(AndroidNdkItem) and @(AndroidSdkItem) item groups, and the URL to download files from is controlled by the $(AndroidUri) property.

Build Configuration

The Xamarin.Android build is heavily dependent on MSBuild, with the intention that it should (eventually?) be possible to build the project simply by checking out the repo, loading Xamarin.Android.sln into an IDE, and Building the solution. (This isn't currently possible, and may never be, but it's the vision.)

However, some properties may need to be altered in order to suit your requirements, such as the location of a cache directory to store the Android SDK and NDK.

To modify the build process, copy Configuration.Override.props.in to Configuration.Override.props, and edit the file as appropriate. Configuration.Override.props is <Import/>ed by Configuration.props and will override any default values specified in Configuration.props.

Overridable MSBuild properties include:

• $(AutoProvision): Automatically install required dependencies, if possible.

• $(AutoProvisionUsesSudo): Use sudo when installing dependencies.

• $(AndroidApiLevel): The Android API level to bind in src/Mono.Android. This is an integer value, e.g. 15 for API-15 (Android 4.0.3).

• $(AndroidFrameworkVersion): The Xamarin.Android $(TargetFrameworkVersion) version which corresponds to $(AndroidApiLevel). This is usually the Android version number with a leading v, e.g. v4.0.3 for API-15.

• $(AndroidSupportedHostJitAbis): The Android ABIs for which to build a host JIT and Xamarin.Android base class libraries (mscorlib.dll/etc.). The "host JIT" is used e.g. with the Xamarin Studio Designer, to render Xamarin.Android apps on the developer's machine. There can also be support for cross-compiling mono for a different host, e.g. to build Windows libmonosgen-2.0.dll from OS X. Supported host values include:

  • Darwin
  • Linux
  • mxe-Win64: Cross-compile Windows 64-bit binaries from Unix.

  The default value is $(HostOS), where $(HostOS) is based on probing various environment variables and filesystem locations. On OS X, the default would be Darwin.

• $(AndroidSupportedTargetAotAbis): The Android ABIs for which to build the Mono AOT compilers. The AOT compilers are required in order to set the $(AotAssemblies) app configuration property to True.

• $(AndroidSupportedTargetJitAbis): The Android ABIs for which to build the the Mono JIT for inclusion within apps. This is a :-separated list of ABIs to build. Supported values are:

  • armeabi
  • armeabi-v7a
  • arm64-v8a
  • x86
  • x86_64

• $(AndroidToolchainCacheDirectory): The directory to cache the downloaded Android NDK and SDK files. This value defaults to $(HOME)\android-archives.

• $(AndroidToolchainDirectory): The directory to install the downloaded Android NDK and SDK files. This value defaults to $(HOME)\android-toolchain.

• $(HostCc), $(HostCxx): The C and C++ compilers to use to generate host-native binaries.

• $(JavaInteropSourceDirectory): The Java.Interop source directory to build and reference projects from. By default, this is external/Java.Interop directory, maintained by git submodule update.

• $(MakeConcurrency): make(1) parameters to use intended to influence the number of CPU cores used when make(1) executes. By default this uses -jCOUNT, where COUNT is obtained from sysctl hw.ncpu.

• $(MonoRequiredMinimumVersion): The minimum system mono version that is supported in order to allow a build to continue. Policy is to require a system mono which corresponds vaguely to the external/mono version. This is not strictly required; older mono versions may work, they just are not tested, and thus not guaranteed or supported.
  By default this is 4.9.3.

• $(MonoSgenBridgeVersion): The Mono SGEN Bridge version to support. Valid values include:

  • 4: Mono 4.6 support.
  • 5: Mono 4.8 and above support. This is the default.

Build

At this point in time, building Xamarin.Android is only supported on OS X. We will work to improve this.

To build Xamarin.Android, first prepare the project:

make prepare

This will perform git submodule update, and any other pre-build tasks that need to be performed. After this process is completed, ensure there is no existing git changes in the external folder.

On the main repo, you can use git status to ensure a clean slate.

Then, you may do one of the following:

1. Run make:

   make
   

2. Load Xamarin.Android.sln into Xamarin Studio and Build the project.

   Note: The Mono.Android project may fail on the first build because it generates sources, and those sources won't exist on the initial project load. Rebuild the project should this happen.

Linux build notes

If you have the binfmt_misc module enabled with any of Mono or Wine installed and you plan to cross-build the Windows compilers and tools (by enabling the mxe-Win32 or mxe-Win64 host targets) as well as LLVM+AOT targets, you will need to disable binfmt_misc for the duration of the build or the Mono/LLVM configure scripts will fail to detect they are cross-compiling and they will produce Windows PE executables for tools required by the build.

To disable binfmt_misc you need to issue the following command as root:

echo 0 > /proc/sys/fs/binfmt_misc/status

and to enable it again, issue the following command:

echo 1 > /proc/sys/fs/binfmt_misc/status

macOS Build Notes

The android-toolchain.projitems, libzip.projitems, and monodroid.projitems project files, among others, use the @(RequiredProgram) build action to check for the existence of a program within $PATH during the build. If a required program doesn't exist, then the build will fail and a suggested brew install command line will be provided to install the missing commands.

Brew Programs

Suggested brew install commands:

brew install cmake
brew install libtool
brew install p7zip
brew install gdk-pixbuf
brew install gettext
brew install coreutils
brew install findutils
brew install gnu-tar
brew install gnu-sed
brew install gawk
brew install gnutls
brew install gnu-indent
brew install gnu-getopt
brew install intltool
brew install scons
brew install wget
brew install xz

If any program is still not found, try to ensure it's linked via:

brew link <package name>

Using Your Build

Once the build has finished, tools/scripts/xabuild may be used on Unix-like platforms to build projects. See the Samples section for example usage.

Using Jenkins Build Artifacts

Please see Documentation/UsingJenkinsBuildArtifacts.md for details on using prebuilt Xamarin.Android binaries.

Build Output Directory Structure

There are two configurations, Debug and Release, controlled by the $(Configuration) MSBuild property.

The bin\Build$(Configuration) directory, e.g. bin\BuildDebug, contains artifacts needed for building the repository. They should not be needed for later execution.

The bin\$(Configuration) directory, e.g. bin\Debug, contains redistributable artifacts, such as tooling and runtimes. This directory acts as a local installation prefix, in which the directory structure mirrors that of the OS X Xamarin.Android.framework directory structure:

• bin\$(Configuration)\lib\xbuild\Xamarin\Android: MSBuild-related support files and required runtimes used by the MSBuild tooling.
• bin\$(Configuration)\lib\xbuild-frameworks\MonoAndroid: Xamarin.Android profiles.
• bin\$(Configuration)\lib\xbuild-frameworks\MonoAndroid\v1.0: Xamarin.Android Base Class Library assemblies such as mscorlib.dll.
• bin\$(Configuration)\lib\xbuild-frameworks\MonoAndroid\*: Contains Mono.Android.dll for a given Xamarin.Android $(TargetFrameworkVersion).

Xamarin.Android $(TargetFrameworkVersion)s

Xamarin.Android uses the MSBuild $(TargetFrameworkVersion) mechanism to provide a separate Mono.Android.dll binding assembly for each API level.

This means there is no single Mono.Android.dll, there is instead a set of them.

This complicates the "mental model" for the Mono.Android project, as a project can have only one output, not many (...within reason...). As such, building the Mono.Android project will only generate a single Mono.Android.dll.

To control which API level is bound, set the $(AndroidApiLevel) and $(AndroidFrameworkVersion) properties. $(AndroidApiLevel) is the Android API level, usually a number, while $(AndroidFrameworkVersion) is the Xamarin.Android $(TargetFrameworkVersion).

The default values will target Android API-25, Android 7.1.

For example, to generate Mono.Android.dll for API-19 (Android 4.4):

cd src/Mono.Android
xbuild /p:AndroidApiLevel=19 /p:AndroidFrameworkVersion=v4.4
# creates bin\Debug\lib\xbuild-frameworks\MonoAndroid\v4.4\Mono.Android.dll

Samples

The HelloWorld sample may be built with the xabuild script:

$ tools/scripts/xabuild /t:SignAndroidPackage samples/HelloWorld/HelloWorld.csproj

xabuild /t:SignAndroidPackage will generate an .apk file, which may be installed onto an Android device with the adb install command:

$ adb install samples/HelloWorld/bin/Debug/com.xamarin.android.helloworld-Signed.apk

HelloWorld may be launched manually through the Android app launcher, or via adb shell am:

$ adb shell am start com.xamarin.android.helloworld/example.MainActivity

Contributing

This project has adopted the code of conduct defined by the Contributor Covenant to clarify expected behavior in our community. For more information, see the .NET Foundation Code of Conduct.

Mailing Lists

To discuss this project, and participate in the design, we use the android-devel@lists.xamarin.com mailing list.

Coding Guidelines

We use Mono's Coding Guidelines.

Reporting Bugs

We use Bugzilla to track issues.

Maintainer FAQ

See DevelopmentTips.md.